Removing the viewfinder
Set the <POWER> switch to <OFF>.
Remove the plug from the <VF> terminal.
Loosen the viewfinder clamping dial and then pull up the knob on the mounting plate.
Slide the viewfinder along the plate to remove it from the plate.
- Top
- Preparation
- Attaching the viewfinder
- Attaching the viewfinder
Attaching the viewfinder
HD viewfinder AJ-HVF21KG (optional) can be used with this camera.
For details on handling the HD viewfinder, refer to the Operating Instructions of the viewfinder.
Set the <POWER> switch to <OFF>.
Pull up the knob on the mounting plate and slide the plate to attach the viewfinder. (Fig. 1)
Securely tighten the viewfinder left-right positioning ring. (Fig. 1)
Connect the plug to the <VF> terminal. (Fig. 2)