Operating Instructions AK-HC5000G/AK-HC5000GS
[CAC ADJUST] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item | Description of settings |
|---|---|
[CAC CONTROL]
|
Selects whether to perform maintenance of CAC files stored in the camera’s internal memory. [OFF], [ON]
|
[CAC FILE DELETE] |
Selects a file to delete. [YES], [NO] |
[CAC FILE NUMBER]
|
Selects a file. [1]…[32]
|
Item | Description of settings | |
|---|---|---|
[LENS FILE ADJUST] |
[LENS FILE SW] |
Switches the enable/disable of the lens file. [OFF], [ON]
|
[LENS FILE MODE] |
Selects the operation mode. [LOAD], [STORE], [CANCEL]
| |
[FILE NO.] |
Selects a file. When [LENS FILE MODE] is [LOAD]: [1]…[32] When [LENS FILE MODE] is [STORE]: [1]…[32]
| |
[FILE NAME] |
Enters a file name. (15 characters or less)
| |
[EXECUTE] |
Selects whether to execute. [NO], [YES] | |
[FLARE R]
|
Adjusts Rch flare of the data selected in [FILE NO.]. [−100]…[+100]
| |
[FLARE G]
|
Adjusts Gch flare of the data selected in [FILE NO.]. [−100]…[+100]
| |
[FLARE B]
|
Adjusts Bch flare of the data selected in [FILE NO.]. [−100]…[+100]
| |
[GAIN R]
|
Adjusts Rch gain of the data selected in [FILE NO.]. [−100]…[+100]
| |
[GAIN B]
|
Adjusts Bch gain of the data selected in [FILE NO.]. [−100]…[+100]
| |
[W H SAW R]
|
Adjusts Rch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform. [−100]…[+100]
| |
[W H SAW G]
|
Adjusts Gch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform. [−100]…[+100]
| |
[W H SAW B]
|
Adjusts Bch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform. [−100]…[+100]
| |
[W H PARA R]
|
Adjusts Rch white shading for the data selected in [FILE NO.] horizontally using a parabolic waveform. [−100]…[+100]
| |
[W H PARA G]
|
Adjusts Gch white shading for the data selected in [FILE NO.] horizontally using a parabolic waveform. [−100]…[+100]
| |
[W H PARA B]
|
Adjusts Bch white shading for the data selected in [FILE NO.] horizontally using a parabolic waveform. [−100]…[+100]
| |
[W V SAW R]
|
Adjusts Rch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform. [−100]…[+100]
| |
[W V SAW G]
|
Adjusts Gch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform. [−100]…[+100]
| |
[W V SAW B]
|
Adjusts Bch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform. [−100]…[+100]
| |
[W V PARA R]
|
Adjusts Rch white shading for the data selected in [FILE NO.] vertically using a parabolic waveform. [−100]…[+100]
| |
[W V PARA G]
|
Adjusts Gch white shading for the data selected in [FILE NO.] vertically using a parabolic waveform. [−100]…[+100]
| |
[W V PARA B]
|
Adjusts Bch white shading for the data selected in [FILE NO.] vertically using a parabolic waveform. [−100]…[+100]
| |
[EXTENDER1]
|
Sets the magnification of lens extender 1. [NONE], [0.1]…[9.9]
| |
[EXTENDER2]
|
Sets the magnification of lens extender 2. [NONE], [0.1]…[9.9]
| |
[EXTENDER3]
|
Sets the magnification of lens extender 3. [NONE], [0.1]…[9.9]
| |
[EXTENDER4]
|
Sets the magnification of lens extender 4. [NONE], [0.1]…[9.9]
| |
Item | Description of settings |
|---|---|
[F DROP RANGE]
|
Sets the determination reference value for the F drop of the lens. [1]…[40]
|
Item | Description of settings |
|---|---|
[CORRECT]
|
Enables/disables the auto correction function of black shading. [OFF], [ON]
|
[DETECTION] |
Selects whether to execute auto correction function of black shading. [NO], [YES] |
[SAVE] |
Selects whether to save the auto correction data. [NO], [YES] |
[CLEAR] |
Selects whether to clear the auto correction data. [NO], [YES] |
Item | Description of settings | |
|---|---|---|
[FAN] |
[FAN MODE]
|
Sets the operation mode of the air cooling fan. [NORMAL], [SILENT], [POWERFUL], [OFF]
|
Item | Description of settings |
|---|---|
[BOX SW(PUSH SW)]
|
Sets the luminance of the box switch of the Build-up Unit. [1]…[10]
|
[LED(POWER)]
|
Sets the luminance of the lamp (<POWER>) of the Build-up Unit. [1]…[10]
|
[LED(ND/CC)]
|
Sets the luminance of the lamp (<ND>/<CC>) of the Build-up Unit. [1]…[10]
|
[CAM NO.(REAR)]
|
Sets the luminance of the rear side camera number of the Build-up Unit. [1]…[10]
|
[CAM NO.(FRONT)]
|
Sets the luminance of the front side camera number of the Build-up Unit. [1]…[10]
|
[DATE/TIME] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item | Description of settings |
|---|---|
[PRESENT] |
Displays the present date and time. |
[DATE YY] |
Sets the year. [15]…[99]
|
[DATE MM] |
Sets the month. [01]…[12]
|
[DATE DD] |
Sets the day. [01]…[31]
|
[TIME HH] |
Sets the hour. [00]…[23]
|
[TIME MM] |
Sets the minute. [00]…[59]
|
[SET EXECUTE] |
Selects whether to save the configured details. [NO], [YES] |
[RESET] |
Selects whether to reset the settings. [NO], [YES] |
[READ FACTORY ALL DATA] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item | Description of settings |
|---|---|
[MENU INITIALIZE] |
Restores the value of [MAIN MENU] to their factory settings. [YES], [NO] |
[READ USER ALL DATA] |
Restores the values of [MAIN MENU], scene file and user file to their factory settings. [YES], [NO] |
[READ FACTORY ALL DATA] |
Restores the values of [MAIN MENU], scene file, user file, and the factory adjusted values to their factory settings. [YES], [NO] |
[UPDATE] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Description of settings |
|---|
Updates the software.
[YES], [NO]
|
