[PAINT]

[BLACK SHADING]

Enables/disables the black shading (saw-toothed waveform or parabolic waveform).

[OFF], [ON]

• Factory setting: [ON]

[WHITE SHADING]

Enables/disables the white shading (saw-toothed waveform or parabolic waveform).

[OFF], [ON]

• Factory setting: [ON]

[FLARE]

Enables/disables flare.

[OFF], [ON]

• Factory setting: [ON]

[GAMMA]

Enables/disables gamma.

[OFF], [ON]

• Factory setting: [ON]

[BLACK GAMMA]

Enables/disables black gamma.

[OFF], [ON]

• Factory setting: [OFF]

[KNEE]

Enables/disables knee.

[OFF], [ON]

• Factory setting: [ON]

[WHITE CLIP]

Enables/disables white clips.

[OFF], [ON]

• Factory setting: [ON]

[DRS SW]

Enables/disables dynamic range stretcher.

[OFF], [ON]

• Factory setting: [OFF]

[DETAIL]

Enables/disables the detail.

[OFF], [ON]

• Factory setting: [ON]

[SKIN TONE DETAIL]

Enables/disables the skin tone detail.

[OFF], [ON]

• Factory setting: [OFF]

[MATRIX]

Enables/disables matrix (linear matrix/12-axis color correction).

[OFF], [ON]

• Factory setting: [OFF]

[LINEAR MATRIX]

Enables/disables linear matrix.

[OFF], [ON]

• Factory setting: [OFF]

[COLOR CORRECT]

Enables/disables 12-axis color correction.

[OFF], [ON]

• Factory setting: [OFF]

Sets the preset matrix.

[NORM], [EBU], [NTSC]

• Factory setting: [NORM]

[CORRECT]

Enables/disables black shading (saw-toothed waveform or parabolic waveform) correction.

[OFF], [ON]

• Factory setting: [ON]

[H SAW R]

Adjusts the black shading gain for Rch horizontally using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[H SAW G]

Adjusts the black shading gain for Gch horizontally using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[H SAW B]

Adjusts the black shading gain for Bch horizontally using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[H PARA R]

Adjusts the black shading gain for Rch horizontally using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[H PARA G]

Adjusts the black shading gain for Gch horizontally using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[H PARA B]

Adjusts the black shading gain for Bch horizontally using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[V SAW R]

Adjusts the black shading gain for Rch vertically using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[V SAW G]

Adjusts the black shading gain for Gch vertically using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[V SAW B]

Adjusts the black shading gain for Bch vertically using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[V PARA R]

Adjusts the black shading gain for Rch vertically using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[V PARA G]

Adjusts the black shading gain for Gch vertically using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

Adjusts the black shading gain for Bch vertically using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[MASTER PEDESTAL]

Adjusts the black level of the master pedestal.

For relative value display: [−99]…[99]

For absolute value display: [−5.6%]…[58.4%]

• Factory setting: [0]/[0%]

[R PEDESTAL]

Sets the correction level of red to the master pedestal.

[−800]…[+800]

• Factory setting: [0]

[G PEDESTAL]

Sets the correction level of green to the master pedestal.

[−800]…[+800]

• Factory setting: [0]

[B PEDESTAL]

Sets the correction level of blue to the master pedestal.

[−800]…[+800]

• Factory setting: [0]

[PEDESTAL OFFSET]

Sets whether to maintain the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.

[ON]: Maintains the values set in [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL].

[OFF]: Sets [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL] to [0].

• Factory setting: [OFF]

[MASTER PEDESTAL ABS DISP SWITCH]

Sets the display of [MASTER PEDESTAL].

This cannot be set in HDR mode.

[ON]: Absolute value

[OFF]: Relative value

• Factory setting: [OFF]

[MASTER PEDESTAL RANGE]

Sets the variable amount of the master pedestal.

[NORMAL]: Current variable amount

[WIDE]: Double of current variable amount

• Factory setting: [NORMAL]

[CHROMA LEVEL SWITCH]

Enables/disables the gain adjustment of chroma.

[OFF], [ON]

• Factory setting: [OFF]

[CHROMA LEVEL]

Sets the gain adjustment of chroma.

[−100%]…[+40%]

• Factory setting: [0%]

[COLOR TEMP PRE SWITCH]

Enables/disables the color temperature adjustment.

[OFF], [ON]

• Factory setting: [OFF]

[COLOR TEMP]

Sets the color temperature when [COLOR TEMP PRE SWITCH] is [ON].

When the <CC> filter is set to <B><3200K>: [2000K]…[15000K]

When the <CC> filter is set to <C><4300K>: [2300K]…[99999K]

When the <CC> filter is set to <D><6300K>: [2700K]…[99999K]

• Factory setting: [3200K]

[R GAIN]

Sets the correction level of red to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[B GAIN]

Sets the correction level of blue to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[G AXIS]

Sets the correction level of green to the color temperature.

[−400]…[+400]

• Factory setting: [0]

—

When the camera is connected to the system, only [COLOR TEMP ACH] can be set.

[COLOR TEMP ACH]

Sets the color temperature when the <WHITE BAL> switch is <A>.

When the <CC> filter is set to <B><3200K>: [2000K]…[15000K]

When the <CC> filter is set to <C><4300K>: [2300K]…[99999K]

When the <CC> filter is set to <D><6300K>: [2700K]…[99999K]

• Factory setting: [3200K]

[R GAIN ACH]

Sets the correction level of red to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[B GAIN ACH]

Sets the correction level of blue to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[G AXIS ACH]

Sets the correction level of green to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[COLOR TEMP BCH]

Sets the color temperature when the <WHITE BAL> switch is <B>.

When the <CC> filter is set to <B><3200K>: [2000K]…[15000K]

When the <CC> filter is set to <C><4300K>: [2300K]…[99999K]

When the <CC> filter is set to <D><6300K>: [2700K]…[99999K]

• Factory setting: [3200K]

[R GAIN BCH]

Sets the correction level of red to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[B GAIN BCH]

Sets the correction level of blue to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[G AXIS BCH]

Sets the correction level of green to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[COLOR TEMP]

Sets the color temperature when any of the <USER 1>/<USER 2>/<USER 3>/<USER 4> buttons are set to [C.TEMP] and the setting is enabled.

When the <CC> filter is set to <B><3200K>: [2000K]…[15000K]

When the <CC> filter is set to <C><4300K>: [2300K]…[99999K]

When the <CC> filter is set to <D><6300K>: [2700K]…[99999K]

• Factory setting: [3200K]

[R GAIN]

Sets the correction level of red to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[B GAIN]

Sets the correction level of blue to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[G AXIS]

Sets the correction level of green to the color temperature.

[−400]…[+400]

• Factory setting: [0]

[RGB GAIN ABS DISP SWITCH]

Sets whether to show the absolute value display for Ach/Bch inRGB gain.

[OFF], [ON]

• Factory setting: [OFF]

[G GAIN REL CONTROL SWITCH]

Enables/disables the relative value control of Gch gain.

[OFF], [ON]

• Factory setting: [OFF]

[R GAIN]

Sets the preset value of Rch gain.

[−1000]…[+1000]

• Factory setting: [0]

[G GAIN]

Sets the preset value of Gch gain.

[−1000]…[+1000]

• Factory setting: [0]

[B GAIN]

Sets the preset value of Bch gain.

[−1000]…[+1000]

• Factory setting: [0]

—

When the camera is connected to the CCU, only [R GAIN ACH]/[G GAIN ACH]/[B GAIN ACH]/[GAIN OFFSET ACH] can be set.

[R GAIN ACH]

Sets the correction level of red to the gain.

[−1000]…[+1000]

• Factory setting: [0]

[G GAIN ACH]

Sets the correction level of green to the gain.

[−1000]…[+1000]

• Factory setting: [0]

[B GAIN ACH]

Sets the correction level of blue to the gain.

[−1000]…[+1000]

• Factory setting: [0]

[GAIN OFFSET ACH]

Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance.

[ON]: Maintains the values set in [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH].

[OFF]: Sets [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH] to [0].

• Factory setting: [OFF]

[R GAIN BCH]

Sets the correction level of red to the gain.

[−1000]…[+1000]

• Factory setting: [0]

[G GAIN BCH]

Sets the correction level of green to the gain.

[−1000]…[+1000]

• Factory setting: [0]

[B GAIN BCH]

Sets the correction level of blue to the gain.

[−1000]…[+1000]

• Factory setting: [0]

[GAIN OFFSET BCH]

Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance.

[ON]: Maintains the values set in [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH].

[OFF]: Sets [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH] to [0].

• Factory setting: [OFF]

[CORRECT]

Enables/disables the white shading (saw-toothed waveform or parabolic waveform) correction.

[OFF], [ON]

• Factory setting: [ON]

[H SAW R]

Adjusts the white shading gain for Rch horizontally using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[H SAW G]

Adjusts the white shading gain for Gch horizontally using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[H SAW B]

Adjusts the white shading gain for Bch horizontally using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[H PARA R]

Adjusts the white shading gain for Rch horizontally using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[H PARA G]

Adjusts the white shading gain for Gch horizontally using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[H PARA B]

Adjusts the white shading gain for Bch horizontally using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[V SAW R]

Adjusts the white shading gain for Rch vertically using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[V SAW G]

Adjusts the white shading gain for Gch vertically using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[V SAW B]

Adjusts the white shading gain for Bch vertically using a saw-toothed waveform.

[−100]…[+100]

• Factory setting: [0]

[V PARA R]

Adjusts the white shading gain for Rch vertically using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[V PARA G]

Adjusts the white shading gain for Gch vertically using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

Adjusts the white shading gain for Bch vertically using a parabolic waveform.

[−100]…[+100]

• Factory setting: [0]

[FLARE]

Enables/disables flare correction.

[OFF], [ON]

• Factory setting: [ON]

[MASTER FLARE]

Adjusts the master flare.

[−100]…[+100]

• Factory setting: [0]

[R FLARE]

Adjusts the Rch flare.

[−100]…[+100]

• Factory setting: [0]

[G FLARE]

Adjusts the Gch flare.

[−100]…[+100]

• Factory setting: [0]

Adjusts the Bch flare.

[−100]…[+100]

• Factory setting: [0]

[GAMMA]

Enables/disables gamma correction.

This cannot be set in HDR mode.

[OFF], [ON]

• Factory setting: [ON]

[GAMMA MODE SELECT]

Selects the type of gamma.

[HD], [FILMLIKE1], [FILMLIKE2], [FILMLIKE3], [FILM REC], [VIDEO REC]

• Factory setting: [HD]

[MASTER GAMMA]

Adjusts the gamma characteristic.

When [GAMMA MODE SELECT] is [HD]: [0.150]…[0.750] (0.0020 step)

When [GAMMA MODE SELECT] is [FILMLIKE1]/[FILMLIKE2]/[FILMLIKE3]: [0.3000]…[0.7500] (0.0025 step)

When [GAMMA MODE SELECT] is [FILE REC]/[VIDEO REC]: [0.150]…[0.750] (0.0020 step)

When [MAIN MENU]→[PAINT]→[DRS]→[DRS] is [ON]: [0.150]…[0.750] (0.0020 step)

• Factory setting: [0.450]

[R GAMMA]

Adjusts the gamma characteristic of red to the master gamma.

[−75]…[+75]

• Factory setting: [0]

[B GAMMA]

Adjusts the gamma characteristic of blue to the master gamma.

[−75]…[+75]

• Factory setting: [0]

[BLACK STRETCH LEVEL]

(Only when [FILM REC] is set) Sets the position of the gamma stretch.

[0%]…[30%]

• Factory setting: [0%]

[DYNAMIC LEVEL]

(Only when [FILM REC] is set) Sets dynamic range.

[200%], [300%], [400%], [500%]

• Factory setting: [500%]

[KNEE POINT]

(Only when [VIDEO REC] is set) Sets the knee point.

[30]…[90]

• Factory setting: [30]

[KNEE SLOPE]

(Only when [VIDEO REC] is set) Sets the knee slope.

[150%]/[200%]/[250%]/[300%]/[350%]/[400%]/[450%]/[500%]/[550%]/[600%]

• Factory setting: [150%]

[BLACK GAMMA]

Enables/disables black gamma.

This cannot be set when [MAIN MENU] → [PAINT] → [DRS] → [DRS] → [ON] is set.

[OFF], [ON]

• Factory setting: [OFF]

[MASTER BLACK GAMMA]

Adjusts the gamma characteristic adjacent to black.

[−48]…[+48]

• Factory setting: [0]

[R BLACK GAMMA]

Adjusts the gamma characteristic of red adjacent to black to the master gamma.

[−20]…[+20]

• Factory setting: [0]

[B BLACK GAMMA]

Adjusts the gamma characteristic of blue adjacent to black to the master gamma.

[−20]…[+20]

• Factory setting: [0]

Sets the gamma initial slope.

When [GAMMA MODE SELECT] is [HD]: [4.0]/[4.5]/[5.0]

When [GAMMA MODE SELECT] is [FILMLIKE1]/[FILMLIKE2]/[FILMLIKE3]: [4.5] (fixed)

When [GAMMA MODE SELECT] is [FILE REC]/[VIDEO REC]: [4.5] (fixed)

• Factory setting: [4.5]

—

Enables/disables the knee function.

This cannot be set in HDR mode.

[OFF], [ON]

• Factory setting: [ON]

[KNEE MASTER POINT]

Sets the knee point position.

[080.00%]…[110.00%] (0.25% step)

• Factory setting: [95.00%]

[KNEE R POINT]

Adjusts the knee point of red to [KNEE MASTER POINT].

[−25.00]…[25.00%] (0.25% step)

• Factory setting: [0.00%]

[KNEE B POINT]

Adjusts the knee point of blue to [KNEE MASTER POINT].

[−25.00]…[25.00%] (0.25% step)

• Factory setting: [0.00%]

[KNEE MASTER SLOPE]

Sets the knee slope.

[00]…[199]

• Factory setting: [130]

[KNEE R SLOPE]

Adjusts the knee slope of red to [KNEE MASTER SLOPE].

[−99]…[+99]

• Factory setting: [0]

[KNEE B SLOPE]

Adjusts the knee slope of blue to [KNEE MASTER SLOPE].

[−99]…[+99]

• Factory setting: [0]

[WHITE CLIP]

Enables/disables the white clip function.

This cannot be set in HDR mode.

[OFF], [ON]

• Factory setting: [ON]

[MASTER WHITE CLIP LEVEL]

Sets the white clip level.

[80%]…[109%]

• Factory setting: [109%]

[R WHITE CLIP LEVEL]

Adjusts red to [MASTER WHITE CLIP LEVEL].

[−15%]…[+15%]

• Factory setting: [0%]

[B WHITE CLIP LEVEL]

Adjusts blue to [MASTER WHITE CLIP LEVEL].

[−15%]…[+15%]

• Factory setting: [0%]

[HI-COLOR]

Sets whether to improve the color reproduction in high-luminance areas.

[OFF], [ON]

• Factory setting: [OFF]

[HI-COLOR LEVEL]

Sets the level of the mode that expands the color dynamic range.

[1]…[32]

• Factory setting: [32]

[DRS]

Enables/disables the dynamic range stretcher function. Set this to [ON] to automatically adjust the contrast.

This cannot be set in HDR mode.

[OFF], [ON]

• Factory setting: [OFF]

[EFFECT DEPTH]

Sets the compression level of the high-luminance areas of the dynamic range stretcher function. Set a larger value to increase the compression level of the high-luminance areas.

[1]…[5]

• Factory setting: [5]

[DETAIL]

Enables/disables all detail functions.

[OFF], [ON]

• Factory setting: [ON]

[MASTER DETAIL]

Sets the master detail.

[−31]…[+31]

• Factory setting: [0]

[H DETAIL LEVEL]

Sets the correction level of the horizontal detail.

[00]…[63]

• Factory setting: [15]

[V DETAIL LEVEL]

Sets the correction level of the vertical detail.

[00]…[63]

• Factory setting: [20]

[PEAK FREQUENCY]

Sets the peak frequency of the horizontal detail.

[12.4MHz], [12.5MHz], [12.7MHz], [12.9MHz], [13.0MHz], [13.3MHz], [13.6MHz], [13.9MHz], [14.2MHz], [14.6MHz], [15.0MHz], [15.5MHz], [16.1MHz], [16.7MHz], [17.3MHz], [18.3MHz], [18.6MHz], [18.8MHz], [19.0MHz], [19.2MHz], [19.5MHz], [19.9MHz], [20.3MHz], [20.9MHz], [21.5MHz], [22.4MHz], [23.6MHz], [25.4MHz], [28.6MHz], [37.1MHz]

• Factory setting: [19.0MHz]

[V DETAIL FREQUENCY]

Sets the vertical detail frequency.

[00]…[31]

• Factory setting: [18]

[CRISP]

Sets the detail signal noise removal level.

[00]…[63]

• Factory setting: [0]

[DETAIL GAIN(+)]

Sets the detail level in the + (upward) direction.

[−31]…[+31]

• Factory setting: [0]

[DETAIL GAIN(−)]

Sets the detail level in the − (downward) direction.

[−31]…[+31]

• Factory setting: [0]

[DETAIL CLIP+]

Adjust the detail clip to reduce glare produced by an excess of details.

[00]…[63]

• Factory setting: [0]

[DETAIL CLIP−]

Adjusts the length of the undershoot of the detail edge component.

[00]…[63]

• Factory setting: [0]

[DETAIL SOURCE]

Sets the RGB signal component ratio to create the detail.

[(G+R)/2], [(G+B)/2], [(2G+B+R)/4], [(3G+R)/4], [R], [G]

• Factory setting: [(G+R)/2]

[KNEE APERTURE LEVEL]

Adjusts the knee aperture level.

This cannot be set in HDR mode.

[00]…[39]

• Factory setting: [5]

[DETAIL KNEE]

Adjusts the detail components of knee.

[00]…[15]

• Factory setting: [0]

[LEVEL DEPENDENT SWITCH]

Enables/disables the function to remove details of dark areas.

This cannot be set in HDR mode.

[OFF], [ON]

• Factory setting: [OFF]

[LEVEL DEPENDENT]

Sets the level to remove details of dark areas.

[00]…[15]

• Factory setting: [8]

[DARK DETAIL SWITCH]

Enables/disables the function to emphasize details of dark areas.

This cannot be set in HDR mode.

[OFF], [ON]

• Factory setting: [OFF]

Sets the level to emphasize details of dark areas.

[00]…[7]

• Factory setting: [3]

[SKIN TONE DETAIL]

Enables/disables the skin tone detail function.

This cannot be set if [MAIN MENU] → [PAINT] → [DETAIL SETTING] → [DETAIL] → [OFF] is set.

[OFF], [ON]

• Factory setting: [OFF]

—

Selects whether to automatically obtain the color saturation and hue information from the cursor position.

[NO], [YES]

[MEMORY SELECT]

Selects the skin tone table of the subject to apply the skin tone table to.

[A], [B], [C]

• Factory setting: [A]

[CURSOR]

Shows/hides the box cursor in the center of the screen.

[OFF], [ON]

• Factory setting: [OFF]

[H POSITION]

Adjusts the horizontal position of the cursor.

[0%]…[100%] (0.25% step)

• Factory setting: [50%]

[V POSITION]

Adjusts the vertical position of the cursor.

[0%]…[100%] (0.25% step)

• Factory setting: [50%]

—

Enables/disables the zebra display.

[OFF], [ON]

• Factory setting: [OFF]

[ZEBRA EFFECT MEMORY]

Selects the table of the zebra display.

[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]

• Factory setting: [A+B+C]

[SKIN TONE EFFECT MEMORY]

Selects the skin tone table used to apply the skin tone detail.

[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]

• Factory setting: [A+B+C]

[SKIN TONE CRISP]

Adjusts the skin tone detail.

[−63]…[+63]

• Factory setting: [+63]

[I CENTER]

Sets the center position on the I axis (the area where the skin tone effect is applied).

[0]…[255]

• Factory setting: [33]

[I WIDTH]

Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the center.

[0]…[255]

• Factory setting: [10]

[Q WIDTH]

Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the center.

[0]…[255]

• Factory setting: [28]

Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.

[0]…[359]

• Factory setting: [89]

[PRESET MATRIX]

Sets the preset matrix.

[NORM], [EBU], [NTSC]

• Factory setting: [NORM]

[MATRIX]

Enables/disables the matrix function.

[OFF], [ON]

• Factory setting: [OFF]

—

Enables/disables the linear matrix function.

[OFF], [ON]

• Factory setting: [OFF]

[LINEAR TABLE]

Selects the table for linear matrix.

[A], [B]

• Factory setting: [A]

—

Enables/disables the 12-axis color correction function.

[OFF], [ON]

• Factory setting: [OFF]

[COLOR CORRECT TABLE]

Selects the table for color correction.

[A], [B]

• Factory setting: [A]

[MATRIX (R-G)_N]

Adjusts the linear matrix between red and green.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (R-G)_P]

Adjusts the linear matrix between red and green.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (R-B)_N]

Adjusts the linear matrix between red and blue.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (R-B)_P]

Adjusts the linear matrix between red and blue.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (G-R)_N]

Adjusts the linear matrix between green and red.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (G-R)_P]

Adjusts the linear matrix between green and red.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (G-B)_N]

Adjusts the linear matrix between green and blue.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (G-B)_P]

Adjusts the linear matrix between green and blue.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (B-R)_N]

Adjusts the linear matrix between blue and red.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (B-R)_P]

Adjusts the linear matrix between blue and red.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[MATRIX (B-G)_N]

Adjusts the linear matrix between blue and green.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

Adjusts the linear matrix between blue and green.

This item is not available when [MATRIX] is set to [OFF].

[−31]…[+31]

• Factory setting: [0]

[PRESET MATRIX]

Sets the preset matrix.

[NORM], [EBU], [NTSC]

• Factory setting: [NORM]

[MATRIX]

Enables/disables the matrix function.

[OFF], [ON]

• Factory setting: [OFF]

—

Enables/disables the linear matrix function.

[OFF], [ON]

• Factory setting: [OFF]

[LINEAR TABLE]

Selects the table for linear matrix.

[A], [B]

• Factory setting: [A]

—

Enables/disables the 12-axis color correction function.

[OFF], [ON]

• Factory setting: [OFF]

[COLOR CORRECT TABLE]

Selects the table for color correction.

[A], [B]

• Factory setting: [A]

[G SAT]

Adjusts green color saturation.

[−127]…[+126]

• Factory setting: [0]

[G_CY SAT]

Adjusts the color saturation between green and cyan.

[−127]…[+126]

• Factory setting: [0]

[CY SAT]

Adjusts cyan color saturation.

[−127]…[+126]

• Factory setting: [0]

[CY_B SAT]

Adjusts the color saturation between cyan and blue.

[−127]…[+126]

• Factory setting: [0]

[B SAT]

Adjusts blue color saturation.

[−127]…[+126]

• Factory setting: [0]

[B_MG SAT]

Adjusts the color saturation between blue and magenta.

[−127]…[+126]

• Factory setting: [0]

[MG_SAT]

Adjusts magenta color saturation.

[−127]…[+126]

• Factory setting: [0]

[MG_R SAT]

Adjusts the color saturation between magenta and red.

[−127]…[+126]

• Factory setting: [0]

[R SAT]

Adjusts red color saturation.

[−127]…[+126]

• Factory setting: [0]

[R_YE SAT]

Adjusts the color saturation between red and yellow.

[−127]…[+126]

• Factory setting: [0]

[YE SAT]

Adjusts yellow color saturation.

[−127]…[+126]

• Factory setting: [0]

[YE_G SAT]

Adjusts the color saturation between yellow and green.

[−127]…[+126]

• Factory setting: [0]

[G PHASE]

Adjusts green hue.

[−127]…[+127]

• Factory setting: [0]

[G_CY PHASE]

Adjusts the hue between green and cyan.

[−127]…[+127]

• Factory setting: [0]

[CY PHASE]

Adjusts cyan hue.

[−127]…[+127]

• Factory setting: [0]

[CY_B PHASE]

Adjusts the hue between cyan and blue.

[−127]…[+127]

• Factory setting: [0]

[B PHASE]

Adjusts blue hue.

[−127]…[+127]

• Factory setting: [0]

[B_MG PHASE]

Adjusts the hue between blue and magenta.

[−127]…[+127]

• Factory setting: [0]

[MG_PHASE]

Adjusts magenta hue.

[−127]…[+127]

• Factory setting: [0]

[MG_R PHASE]

Adjusts the hue between magenta and red.

[−127]…[+127]

• Factory setting: [0]

[R PHASE]

Adjusts red hue.

[−127]…[+127]

• Factory setting: [0]

[R_YE PHASE]

Adjusts the hue between red and yellow.

[−127]…[+127]

• Factory setting: [0]

[YE PHASE]

Adjusts yellow hue.

[−127]…[+127]

• Factory setting: [0]

[YE_G PHASE]

Adjusts the hue between yellow and green.

[−127]…[+127]

• Factory setting: [0]

—

Obtains the color information automatically from the cursor position and moves the menu arrow to the axis whose color is to be adjusted.

[NO], [YES]

[CURSOR]

Shows/hides the box cursor in the center of the screen.

[OFF], [ON]

• Factory setting: [OFF]

[H POSITION]

Adjusts the horizontal position of the cursor.

[0%]…[100%] (0.25% step)

• Factory setting: [50%]

[V POSITION]

Adjusts the vertical position of the cursor.

[0%]…[100%] (0.25% step)

• Factory setting: [50%]

[SKIN AREA SW]

Enables/disables the function to finely adjust the color of the skin tone area.

[OFF], [ON]

• Factory setting: [OFF]

[SKIN AREA TABLE]

Selects the table for the skin tone area.

[A], [B]

• Factory setting: [A]

[SKIN AREA HUE]

Finely adjusts the hue of the skin tone area.

[−127]…[+127]

• Factory setting: [0]

Finely adjusts the tone of the skin tone area.

[−127]…[+126]

• Factory setting: [0]

[DNR SW]

Enables/disables the noise reduction function.

[OFF], [ON]

• Factory setting: [OFF]

[DNR LEVEL]

Sets the level of noise reduction.

[1]…[5]

• Factory setting: [3]

[MODE]

Selects the operation mode.

[LOAD], [STORE]

• Factory setting: [LOAD]

[FILE NO.]

Selects a file number.

When [MODE] is [LOAD]: [OFF], [1]…[8]

When [MODE] is [STORE]: [1]…[8]

• Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

• Factory setting: [SCENE1]

[EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[CONTROL ROTATION MODE]

Sets the control rotation mode of ROP.

[MODE1], [MODE2]

• Factory setting: [MODE2]