[SD CARD] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Description of settings
Selects the operation mode.
[FORMAT], [LOAD], [STORE]
Selects a file.
[ALL], [ALL SCENE], [ALL USER], [ALL LENS], [SCENE], [USER], [LENS]
Selects a file number.
[CURRENT], … (Scene file)
… (User file)
… (Lens file)
[CURRENT] (Operation file)
Enters a file name. (15 characters or less)
[SD FILE NO.]
Selects the file number of the SD memory card.
Selects whether to execute with the configured settings.