[IN/OUT SELECT]

[CALL TALLY]

Sets whether the rear tally lamp is to be lit up when called.

[OFF]: Turned off.

[R]: Red tally lights up.

[T]: Up tally lights up.

[R&T]: Red tally and up tally light up.

• Factory setting: [OFF]

[TALLY GUARD]

Enables/disables automatic white balance, automatic black balance, and automatic setup when the tally lamp is lit.

[OFF], [ON]

• Factory setting: [OFF]

[HD-SDI1 OUT]

Configures the video output from the <HD SDI1> terminal.

[CAM]: Outputs camera images.

[HD PROMPT]: Outputs HD prompter video images.

• Factory setting: [CAM]

[HD-SDI1 OUTPUT FORMAT]

Sets the signal format of the video output from the <HD SDI1> terminal.

• Factory setting: [1080i]

[HD-SDI1 OUTPUT ITEM]

Selects details of the characters superimposed on images output from the <HD SDI1> terminal.

[MENU ONLY]: Displays only on the menu.

[STATUS]: Displays all characters that are the same as in the viewfinder display.

• Factory setting: [MENU ONLY]

[HD-SDI1 CHAR]

Sets whether to superimpose characters on images output from the <HD SDI1> terminal.

This cannot be set when the output format is [720P].

[OFF], [ON]

• Factory setting: [OFF]

[HD-SDI1 CHAR SIZE]

Sets the size of the characters superimposed on images output from the <HD SDI1> terminal.

[LARGE], [SMALL]

• Factory setting: [SMALL]

[HD-SDI1 3G-SDI]

Sets the output format when the video output from the <HD SDI1> terminal is in 3G format.

[LEVEL-A], [LEVEL-B]

• Factory setting: [LEVEL-A]

[HD-SDI2 OUT]

Configures the video output from the <HD SDI2> terminal.

[CAM]: Outputs camera images.

[VF]: Outputs viewfinder images.

[RET]: Outputs return images.

[RET1], [RET2], [RET3], [RET4]: Outputs fixed return images.

• Factory setting: [VF]

[HD-SDI2 OUTPUT FORMAT]

Sets the signal format of the video output from the <HD SDI2> terminal.

• Factory setting: [1080i]

[HD-SDI2 OUTPUT ITEM]

Selects details of the characters superimposed on images output from the <HD SDI2> terminal.

[MENU ONLY]: Displays only on the menu.

[STATUS]: Displays all characters that are the same as in the viewfinder display.

• Factory setting: [MENU ONLY]

[HD-SDI2 CHAR]

Sets whether to superimpose characters on images output from the <HD SDI2> terminal.

This cannot be set when the output format is [720P].

[OFF], [ON]

• Factory setting: [OFF]

[HD-SDI2 CHAR SIZE]

Selects the size of the characters superimposed on images output from the <HD SDI2> terminal.

[LARGE], [SMALL]

• Factory setting: [SMALL]

[HD-SDI2 3G-SDI]

Sets the output format when the video output from the <HD SDI2> terminal is in 3G format.

[LEVEL-A], [LEVEL-B]

• Factory setting: [LEVEL-A]

[HD-SDI2 POWER]

Enables/disables the power supply of the <HD SDI2> terminal.

[ACTIVE], [SAVE]

• Factory setting: [ACTIVE]

[AUX I/O]

Configures the video output from the <AUX> terminal.

[PMT2 OUT], [HD TRUNK]

• Factory setting: [PMT2 OUT]

[VF OUT]

Configures the video output from the <VF> terminal.

[Y/C], [R], [G], [B], [NAM]

• Factory setting: [ENC]

[TRUNK1]

Sets the serial interface standard of the <TRUNK> terminal.

[RS422], [RS232C]

• Factory setting: [RS422]

[TRUNK2]

Sets the serial interface standard of the <TRUNK> terminal.

[RS422], [RS232C]

• Factory setting: [RS422]

[BACK LIGHT]

Sets the brightness of the backlight.

[1]…[70]

• Factory setting: [20]

[LAN]

Sets the usage for the <LAN> terminal.

[TRUNK], [PC]

• Factory setting: [PC]

[B/U LENS]

Sets the lens type of the Build-up Unit.

[PORTABLE], [BOX]

• Factory setting: [BOX]

[T-BAR CONNECT]

Sets whether to connect the T-BAR unit.

[OFF], [ON]

• Factory setting: [OFF]

[LENS I/F]

Sets the lens interface.

• Factory setting: [SERIAL]

[DISPLAY STATUS/BAR OSD]

[CAM ID CHARACTER]

Sets the camera name.

[H PHASE-COARSE]

Roughly adjusts the phase of horizontal synchronization.

[−5]…[+5]

• Factory setting: [0]

[H PHASE-FINE]

Finely adjusts the phase of horizontal synchronization.

[−100]…[+100]

• Factory setting: [0]