Upper side

  1. Viewfinder front/back positioning lever
  2. To adjust the front/back position of the viewfinder, loosen this lever and slide the viewfinder forwards or backwards to adjust the viewfinder to a position that enables easy viewing. After adjusting the viewfinder, turn the lever towards <LOCK> to lock the position.
  3. Viewfinder left-right positioning ring
  4. To adjust the left/right position of the viewfinder, loosen this lever and slide the viewfinder to the left or right to adjust the viewfinder to a position that enables easy viewing. Tighten the lever to clamp the viewfinder in place after adjusting.
  5. Light shoe
  6. Used to mount a video light, etc.
  7. Microphone holder holes
  8. Used to mount a microphone holder.
  9. <PTT> switch
  10. Used to switch the intercom microphone on/off. The function can be changed in [MAIN MENU] → [SWITCH MODE] → [USER SWITCH] → [GRIP PTT].
  11. <RET> switch
  12. Used to switch to the return A signal. The function can be changed in [MAIN MENU] → [SWITCH MODE] → [USER SWITCH] → [GRIP RET].
  13. Accessory mounting hole
  14. Used to attach accessories. This hole is used only for the purpose of attaching accessories.
    • Mounting hole size
      • 1/4-20 UNC (screw length 13 mm or shorter)
  15. Lock release button
  16. Used to release the lock of the V-groove.
  17. V-groove
  18. Used to attach the rear viewfinder.