[INTERCOM SETTING]

[INTERCOM1]

Item

Description of settings

[INCOM1 TALK SETTING]

[MIC TYPE]

Selects the type of the intercom 1 microphone.

[DYN]: Dynamic type

[ECM]: Condenser type

[CBN]: Carbon type

  • Factory setting: [DYN]

[MIC POWER]

Sets the on/off for the power supply to the intercom 1 microphone.

[OFF], [ON]

  • Factory setting: [OFF]

[MIC GAIN]

Sets the volume of the intercom 1 microphone.

[−12dB]…[12dB]

  • Factory setting: [0dB]

[SIDE TONE]

Sets the volume of the intercom 1 microphone side tone.

[OFF], [−36dB]…[0dB] (3 dB step)

  • Factory setting: [−6dB]

[INCOM1 TO CCU]

Sets whether to transmit the intercom 1 microphone audio to the CCU.

[OFF], [ON]

  • Factory setting: [ON]

[INCOM1 RECEIVE SETTING]

[OUTPUT GAIN]

Sets the gain of the intercom 1 audio output.

[NORMAL], [BOOST]

  • Factory setting: [NORMAL]

[OUTPUT CH]

Sets the allocation of the intercom 1 audio output.

[CH1/CH2], [CH2/CH1]

  • Factory setting: [CH1/CH2]

[INCOM1 RECEIVE CH1 SETTING]

[PGM1 MIX]

Sets whether to mix the PGM1 signal with the intercom 1 CH1 output.

[OFF], [ON]

  • Factory setting: [ON]

[PGM2 MIX]

Sets whether to mix the PGM2 signal with the intercom 1 CH1 output.

[OFF], [ON]

  • Factory setting: [ON]

[CRANE INCOM MIX]

Sets whether to mix the crane intercom signal with the intercom 1 CH1 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM2 MIX]

([CLEAR COM MIX])

Sets whether to mix the intercom 2 signal (CLEAR COM signal for the Clear-Com option) with the intercom 1 CH1 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM1 RECEIVE CH2 SETTING]

[ENG MIX]

Sets whether to mix the ENG signal with the intercom 1 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[PROD MIX]

Sets whether to mix the PROD signal with the intercom 1 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[PGM1 MIX]

Sets whether to mix the PGM1 signal with the intercom 1 CH2 output.

[OFF], [ON]

  • Factory setting: [ON]

[PGM2 MIX]

Sets whether to mix the PGM2 signal with the intercom 1 CH2 output.

[OFF], [ON]

  • Factory setting: [ON]

[CRANE INCOM MIX]

Sets whether to mix the crane intercom signal with the intercom 1 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM2 MIX]

([CLEAR COM MIX])

Sets whether to mix the intercom 2 signal (CLEAR COM signal for the Clear-Com option) with the intercom 1 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INTERCOM2]

This item is not displayed when Clear-Com is connected.

Item

Description of settings

[INCOM2 TALK SETTING]

[MIC TYPE]

Selects the type of the intercom 2 microphone.

[DYN]: Dynamic type

[ECM]: Condenser type

[CBN]: Carbon type

  • Factory setting: [DYN]

[MIC POWER]

Sets the on/off for the power supply to the intercom 2 microphone.

[OFF], [ON]

  • Factory setting: [OFF]

[MIC GAIN]

Sets the volume of the intercom 2 microphone.

[−12dB]…[+12dB]

  • Factory setting: [0dB]

[SIDE TONE]

Sets the volume of the intercom 2 microphone side tone.

[OFF], [−36dB]…[0dB] (3 dB step)

  • Factory setting: [−6dB]

[INCOM2 TO CCU]

Sets whether to transmit the intercom 2 microphone audio to the CCU.

[OFF], [ON]

  • Factory setting: [ON]

[INCOM2 RECEIVE SETTING]

[OUTPUT GAIN]

Sets the gain of the intercom 2 audio output.

[NORMAL], [BOOST]

  • Factory setting: [NORMAL]

[OUTPUT CH]

Sets the allocation of the intercom 2 audio output.

[CH1/CH2], [CH2/CH1]

  • Factory setting: [CH1/CH2]

[INCOM2 RECEIVE CH1 SETTING]

[PGM1 MIX]

Sets whether to mix the PGM1 signal with the intercom 2 CH1 output.

[OFF], [ON]

  • Factory setting: [ON]

[PGM2 MIX]

Sets whether to mix the PGM2 signal with the intercom 2 CH1 output.

[OFF], [ON]

  • Factory setting: [ON]

[CRANE INCOM MIX]

Sets whether to mix the crane intercom signal with the intercom 2 CH1 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM1 MIX]

Sets whether to mix the intercom 1 signal with the intercom 2 CH1 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM2 RECEIVE CH2 SETTING]

[ENG MIX]

Sets whether to mix the ENG signal with the intercom 2 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[PROD MIX]

Sets whether to mix the PROD signal with the intercom 2 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[PGM1 MIX]

Sets whether to mix the PGM1 signal with the intercom 2 CH2 output.

[OFF], [ON]

  • Factory setting: [ON]

[PGM2 MIX]

Sets whether to mix the PGM2 signal with the intercom 2 CH2 output.

[OFF], [ON]

  • Factory setting: [ON]

[CRANE INCOM MIX]

Sets whether to mix the crane intercom signal with the intercom 2 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM1 MIX]

Sets whether to mix the intercom 1 signal with the intercom 2 CH2 output.

[OFF], [ON]

  • Factory setting: [OFF]

[STANDBY INTERCOM]

Item

Description of settings

[STBY INCOM SETTING]

[INPUT LEVEL]

Sets the input signal level of the stand-by intercom.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[OUTPUT LEVEL]

Sets the output signal level of the stand-by intercom.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[CANCEL LEVEL]

Sets the input/output cancel signal level of the stand-by intercom.

[−20.0dB]…[+20.0dB] (0.5 dB step)

  • Factory setting: [0.0dB]

[STBY INCOM ON/OFF]

Enables/disables the stand-by intercom.

[OFF], [ON]

  • Factory setting: [ON]

[CRANE INTERCOM]

Item

Description of settings

[CRANE INCOM SETTING]

[INPUT LEVEL]

Sets the input volume of the crane intercom (connected to the <EXT I/O> terminal).

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[OUTPUT LEVEL]

Sets the output volume of the crane intercom (connected to the <EXT I/O> terminal).

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[SIDE TONE]

Sets the side tone volume of the crane intercom (connected to the <EXT I/O> terminal).

[OFF], [−36dB]…[0dB] (3 dB step)

  • Factory setting: [−6dB]

[ENG/PROD]

Sets the line input of the crane intercom audio.

[ENG], [PROD], [BOTH]

  • Factory setting: [ENG]

[CRANE TO CCU]

Sets whether to output the crane intercom audio to the CCU.

[OFF], [ON]

  • Factory setting: [OFF]

[CRANE INCOM OUTPUT SETTING]

[PGM1 MIX]

Sets whether to mix the PGM1 signal with the crane intercom output.

[OFF], [ON]

  • Factory setting: [ON]

[PGM2 MIX]

Sets whether to mix the PGM2 signal with the crane intercom output.

[OFF], [ON]

  • Factory setting: [ON]

[INCOM1 MIX]

Sets whether to mix the intercom 1 signal with the crane intercom output.

[OFF], [ON]

  • Factory setting: [OFF]

[INCOM2 MIX]

([CLEAR COM MIX])

Sets whether to mix the intercom 2 signal (CLEAR COM signal for Clear-Com option) with the crane intercom output.

[OFF], [ON]

  • Factory setting: [OFF]

[CLEAR COM]

This item is not displayed when intercom 2 is connected.

Item

Description of settings

[CLEAR COM SETTING]

[INPUT LEVEL]

Sets the input volume of Clear-Com.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[CANCEL LEVEL]

Sets the input/output cancel signal level of Clear-Com.

[−20.0dB]…[+20.0dB] (0.5 dB step)

  • Factory setting: [0.0dB]

[SIDE TONE]

Sets the side tone volume of Clear-Com.

[OFF], [−36dB]…[0dB] (3 dB step)

  • Factory setting: [−6dB]

[CLEAR COM TO CCU]

Sets whether to output the Clear-Com audio to the CCU.

[OFF], [ON]

  • Factory setting: [ON]

[CLEAR COM OUTPUT SETTING]

[PGM1 MIX]

Sets whether to mix the PGM1 signal with Clear-Com output.

[OFF], [ON]

  • Factory setting: [ON]

[PGM2 MIX]

Sets whether to mix the PGM2 signal with Clear-Com output.

[OFF], [ON]

  • Factory setting: [ON]

[INCOM1 MIX]

Sets whether to mix the INCOM1 signal with Clear-Com output.

[OFF], [ON]

  • Factory setting: [OFF]

[CRANE INCOM MIX]

Sets whether to mix the CRANE INCOM signal with Clear-Com output.

[OFF], [ON]

  • Factory setting: [OFF]

[EAR PHONES SETTING]

Item

Description of settings

[LCH OUTPUT SELECT]

Sets the audio signal output to the L channel of the earphones.

[INCOM1(CH1)], [INCOM2(CH1)] (for Clear-Com option: [CLEAR COM]), [INCOM1/2 MIX(CH1)] (for Clear-Com option: [INCOM1(CH1)/CLEAR COM MIX]), [PGM1], [PGM2], [PGM1/PGM2 MIX], [MIC1], [OFF]

  • Factory setting: [INCOM1(CH1)]

[RCH OUTPUT SELECT]

Sets the audio signal output to the R channel of the earphones.

[INCOM1(CH2)], [INCOM2(CH2)] (for Clear-Com option: [CLEAR COM]), [INCOM1/2 MIX(CH2)] (for Clear-Com option: [INCOM1(CH2)/CLEAR COM MIX]), [PGM1], [PGM2], [PGM1/PGM2 MIX], [MIC2], [OFF]

  • Factory setting: [INCOM1(CH2)]

[LCH MONITOR LEVEL]

Sets the monitor output level for the L channel of the earphones.

[−40dB]…[+12dB]

  • Factory setting: [0dB]

[RCH MONITOR LEVEL]

Sets the monitor output level for the R channel of the earphones.

[−40dB]…[+12dB]

  • Factory setting: [0dB]

[PGM OUTPUT]

These items can be set only when the PGM option is used.

Item

Description of settings

[PGM OUTPUT SELECT]

Sets the audio output from the <PGM OUT> terminal.

[PGM1], [PGM2], [PGM1/PGM2], [ENG], [PROD], [ENG/PROD], [CRANE]

  • Factory setting: [PGM1]

[PGM OUTPUT LEVEL]

Sets the output level from the <PGM OUT> terminal.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[LEVEL/PGM1/PGM2 VR SETTING]

Item

Description of settings

[INTERCOM1 PGM1 VR]

Sets the audio signal to be controlled by the <PGM1> dial of <INTERCOM1>.

[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM2] (for Clear-Com option: [CLEAR COM])

  • Factory setting: [PGM1]

[INTERCOM1 PGM2 VR]

Sets the audio signal to be controlled by the <PGM2> dial of <INTERCOM1>.

[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM2] (for Clear-Com option: [CLEAR COM])

  • Factory setting: [PGM2]

[INTERCOM2 PGM1 VR]

Sets the audio signal to be controlled by the <PGM1> dial of <INTERCOM2>.

[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM1]

  • Factory setting: [PGM1]

[INTERCOM2 PGM2 VR]

Sets the audio signal to be controlled by the <PGM2> dial of <INTERCOM2>.

[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM1]

  • Factory setting: [PGM2]

[VR MIN MODE]

Sets the level when the volume level is minimum.

[MUTE]: Muted

[MIN GAIN]: Minimum level

  • Factory setting: [MUTE]

[OPT INTERCOM INPUT SETTING]

Item

Description of settings

[OPT ENG INPUT LEVEL]

Sets the input level of the ENG audio signal sent from the CCU to the camera.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[OPT PROD INPUT LEVEL]

Sets the input level of the PROD audio signal sent from the CCU to the camera.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[OPT PGM1 INPUT LEVEL]

Sets the input level of the PGM1 audio signal sent from the CCU to the camera.

[−36dB]…[+12dB]

  • Factory setting: [0dB]

[OPT PGM2 INPUT LEVEL]

Sets the input level of the PGM2 audio signal sent from the CCU to the camera.

[−36dB]…[+12dB]

  • Factory setting: [0dB]