- Top
- Menu Operations
- Menu list
- [DISPLAY SETUP]
[MARKER]
Item |
Description of settings |
|
[FOCUS ASSIST SW]
|
Enables/disables the focus assist. [OFF], [ON]
|
|
[FOCUS ASSIST MODE] |
—
|
Sets whether to cancel the focus assist by the switch or by the duration of time. [SW], [INSTANT]
|
[CANCEL TIME]
|
Sets the duration of time before cancelling the focus assist when [INSTANT] is selected. [1sec], [3sec], [5sec], [10sec], [20sec]
|
|
[FOCUS ASSIST] |
— |
Displays the type of the focus assist. |
[IN RED SW]
|
Enables/disables the IN RED. [OFF], [ON]
|
|
[IN RED COLOR]
|
Sets the color for IN RED. [RED], [GREEN], [BLUE], [WHITE]
|
|
[SQUARE SW]
|
Enables/disables the SQUARE. [OFF], [ON]
|
|
[SQUARE COLOR]
|
Sets the color for the SQUARE. [RED], [GREEN]
|
|
[BAR SW]
|
Enables/disables the BAR. [OFF], [ON]
|
|
[BAR MODE]
|
Sets the appearance of the focus bar. [NORMAL], [THICK]
|
|
[BAR COLOR]
|
Sets the color of the bar when [BAR MODE] is set to [THICK]. [WHITE], [RED], [BLUE], [GREEN]
|
|
[BAR POSITION]
|
Sets the display position of the bar when [BAR MODE] is set to [THICK]. [UPPER], [UNDER], [RIGHT], [LEFT]
|
|
[MAG SW]
|
Enables/disables the magnification display function. [OFF], [ON]
|
|
[ZEBRA] |
—
|
Enables/disables the luminance zebra. [OFF], [ON]
|
[ZEBRA1 LEVEL]
|
Sets the level of the luminance zebra 1. [0%]…[109%]
|
|
[ZEBRA2 LEVEL]
|
Sets the level of the luminance zebra 2. [0%]…[109%]
|
|
[ZEBRA PATTERN]
|
Sets the pattern of the luminance zebra. [1], [1+2], [SPOT]
|
|
[FRAME LEVEL SWITCH] |
—
|
Shows/hides the level display outside the frame marker. [OFF], [ON]
|
[FRAME LEVEL]
|
Sets the level to be displayed outside the frame marker. [0]…[31]
|
|
[FRAME MARK SWITCH]
|
Shows/hides the frame marker. [OFF], [ON]
|
|
[FRAME SIG]
|
Sets the aspect ratio of the frame marker. [4:3], [13:9], [14:9], [15:9], [16:9], [CINEMA], [VISTA]
|
|
[SAFETY MARK1 SWITCH]
|
Shows/hides the safety marker 1. [OFF], [ON]
|
|
[SAFETY MARK1]
|
Sets the aspect ratio of safety marker 1. [16:9], [15:9], [14:9], [13:9], [4:3]
|
|
[SAFETY AREA1]
|
Sets the size of safety area 1. [80%]…[100%]
|
|
[SAFETY MARK2 SWITCH]
|
Shows/hides the safety marker 2. [OFF], [ON]
|
|
[SAFETY MARK2]
|
Sets the aspect ratio of safety marker 2. [16:9], [15:9], [14:9], [13:9], [4:3]
|
|
[SAFETY AREA2]
|
Sets the size of safety marker 2. [80%]…[100%]
|
|
[EFFECTIVE AREA MARK]
|
Shows/hides the effective area marker. [OFF], [ON]
|
|
[PF LENS AREA MARK]
|
Shows/hides the auto focus area marker of the PF lens. [OFF], [AUTO]
|
|
[CENTER MARK] |
—
|
Shows/hides the center marker. [OFF], [ON]
|
[CENTER MARK SELECT]
|
Sets the size of the center marker. [1]…[8]
|
|
[LINE WIDTH]
|
Sets the thickness of the center marker frame. [1]…[3]
|
|
[MARKER LEVEL]
|
Sets the brightness of the markers and on-screen display. [50%]…[100%]
|
|
[USER BOX] |
—
|
Shows/hides the user box. [OFF], [ON]
|
[MEMORY SELECT]
|
Configures the memory of the user box. [1], [2], [3]
|
|
[H POSITION]
|
Adjusts the horizontal position of the user box. [−50]…[50]
|
|
[H OFFSET]
|
Finely adjusts the horizontal offset of the user box. [−10]…[10]
|
|
[V POSITION]
|
Adjusts the vertical position of the user box. [−50]…[50]
|
|
[V OFFSET]
|
Finely adjusts the vertical offset of the user box. [−10]…[10]
|
|
[WIDTH]
|
Adjusts the width of the user box. [0]…[100]
|
|
[HEIGHT]
|
Adjusts the height of the user box. [0]…[100]
|
|
[BOX/CROSS]
|
Sets the shape of the user box. [BOX], [CROSS]
|
|
[EFFECT MEMORY1]
|
Configures the valid memory of the user box. [OFF], [ON]
|
|
[EFFECT MEMORY2]
|
Configures the valid memory of the user box. [OFF], [ON]
|
|
[EFFECT MEMORY3]
|
Configures the valid memory of the user box. [OFF], [ON]
|
|
[VIEW FINDER DETAIL]
Item |
Description of settings |
|
[VIEW FINDER DETAIL]
|
Adjusts the details of the viewfinder. [0]…[23]
|
|
[ZOOM LINK]
|
Enables/disables the details of the zoom-interlocked viewfinder. [OFF], [ON]
|
|
[ZOOM LINK LEVEL]
|
Adjusts the detail level of the zoom-interlocked viewfinder. [1]…[5]
|
|
[RETURN SIGNAL] |
[HD PEAK FREQUENCY]
|
Adjusts the peak frequency of the return signal. [LOW], [MID], [HIGH]
|
[HD OFFSET GAIN]
|
Adjusts the detail offset gain of the return signal. [0]…[5]
|
|
[HD CRISP]
|
Adjusts the detail crisp level of the return signal. [0]…[63]
|
|
[VIEW FINDER DISPLAY]
Item |
Description of settings |
[F NUMBER]
|
Shows/hides the iris display (F value). [OFF], [ON]
This is displayed when you use a lens that outputs position information. |
[ZOOM]
|
Shows/hides the zoom position display. [OFF], [ON]
This is displayed when you use a lens that outputs position information. |
[FOCUS]
|
Shows/hides the focus position display. [OFF], [ON]
This is displayed when you use a lens that outputs position information. |
[FOCUS CONDITION]
|
Shows/hides the focus information display. [OFF], [ON]
|
[EXTENDER]
|
Shows/hides the extender display. [OFF], [ON]
|
[FILTER]
|
Shows/hides the filter position display. [OFF], [ON]
|
[MASTER GAIN]
|
Shows/hides the master gain display. [OFF], [ON]
|
[OFFSET GAIN]
|
Shows/hides the offset gain display. [OFF], [ON]
|
[SHUTTER]
|
Shows/hides the electronic shutter display. [OFF], [ON]
|
[AUDIO LEVEL]
|
Shows/hides the audio level (level meter) display. [OFF], [ON]
|
[DIGITAL EXTENDER]
|
Shows/hides the digital extender display. [OFF], [ON]
|
[WHITE CHANNEL]
|
Shows/hides the white balance memory display. [OFF], [ON]
|
[DRS]
|
Shows/hides the dynamic range stretcher display. [OFF], [ON]
|
[CAC]
|
Shows/hides the chromatic aberration compensation (CAC) display. [OFF], [ON]
|
[OPT LEVEL]
|
Shows/hides the display of the level of the optical signal received by the camera. [OFF], [ON]
|
[RETURN SELECT]
|
Shows/hides the return ID display. [OFF], [ON]
|
[STATUS]
|
Shows/hides the display appearing when functions are selected. [OFF], [ON]
|
[STATUS(AUTO)]
|
Shows/hides the display appearing when AWB/ABB/ASU are activated or deactivated. [OFF], [ON]
|
[SENSOR RATE]
|
Shows/hides the sensor imaging rate display. [OFF], [ON]
|
[VOLTAGE]
|
Shows/hides the power supply display. [OFF], [ON]
|
[SYSTEM MODE]
|
Shows/hides the system frequency/resolution display. [OFF], [ON]
|
[FAN OFF]
|
Shows/hides the status display when the fan is off. [OFF], [ON]
|
[MONI OUT SIGNAL]
|
Shows/hides the monitor output signal type display. [OFF], [ON]
|
[COLOR TEMP]
|
Shows/hides the color temperature display. [OFF], [ON]
|
[FBC]
|
Shows/hides the flash band compensation display. [OFF], [ON]
|
[SHOOTING MODE]
|
Shows/hides the sensitivity mode display. [OFF], [ON]
|
[MAG]
|
Shows/hides the status display when the focus assist magnification display function is enabled. [OFF], [ON]
|
[MENU DISP WARNING]
|
Shows/hides the menu warning display. [OFF], [ON]
|
[F DROP ADJUST]
|
Shows/hides the F drop display. [OFF], [ON]
|
[HDR]
|
Shows/hides the HDR display. [OFF], [ON]
|
[CHARACTER SIZE]
|
Selects the character size for display on the viewfinder. [LARGE], [SMALL]
|
[MODE CHECK IND]
Item |
Description of settings |
[AUDIO]
|
Shows/hides the [AUDIO] screen during the mode check. [OFF], [ON]
|
[USER SW STATUS]
|
Shows/hides the [USER SW STATUS] screen during the mode check. [OFF], [ON]
|
[!LED]
|
Shows/hides the [!LED] screen during the mode check. [OFF], [ON]
|
[SDI OUT]
|
Shows/hides the [SDI OUT] screen during the mode check. [OFF], [ON]
|
[CAC]
|
Shows/hides the [CAC] screen during the mode check. [OFF], [ON]
|
[!LED]
For items whose setting is [ON], the LED in the viewfinder (
) lights up when the operating status of the camera becomes irregular.
Item |
Description of settings |
[GAMMA OFF]
|
Shows/hides the status display when gamma is disabled. [OFF], [ON]
|
[SHUTTER]
|
Shows/hides the status display when the electronic shutter is enabled. [OFF], [ON]
|
[EXTENDER]
|
Shows/hides the status display when the lens extender is enabled. [OFF], [ON]
|
[FAN OFF]
|
Shows/hides the status display when the fan is off. [OFF], [ON]
|
[MASTER GAIN]
|
Shows/hides the status display when the gain is other than 0 dB. [OFF], [ON]
|
[BLACK GAMMA]
|
Shows/hides the status display when the black gamma is enabled. [OFF], [ON]
|