[MAINTENANCE]

[CAC ADJUST]

Item

Description of settings

[CAC CONTROL]

Enables/disables the chromatic aberration compensation.

[OFF], [ON]

  • Factory setting: [ON]

[CAC FILE DELETE]

Selects a file to delete.

[YES], [NO]

[CAC FILE NUMBER]

Selects a file.

[1]…[32]

  • Factory setting: [1]

[LENS FILE ADJUST]

Item

Description of settings

[LENS FILE ADJUST]

[LENS FILE SW]

Switches the enable/disable of the lens file.

[OFF], [ON]

  • Factory setting: [OFF]

[LENS FILE MODE]

Selects the operation mode.

[LOAD], [STORE], [CANCEL]

  • Factory setting: [LOAD]

[FILE NO.]

Selects a file.

When [LENS FILE MODE] is [LOAD]:

[1]…[32]

When [LENS FILE MODE] is [STORE]:

[1]…[32]

  • Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

  • Factory setting: [LENS FILE 1]

[EXECUTE]

Selects whether to execute.

[NO], [YES]

[FLARE R]

Adjusts Rch flare of the data selected in [FILE NO.].

[−100]…[+100]

  • Factory setting: [0]

[FLARE G]

Adjusts Gch flare of the data selected in [FILE NO.].

[−100]…[+100]

  • Factory setting: [0]

[FLARE B]

Adjusts Bch flare of the data selected in [FILE NO.].

[−100]…[+100]

  • Factory setting: [0]

[GAIN R]

Adjusts Rch gain of the data selected in [FILE NO.].

[−100]…[+100]

  • Factory setting: [0]

[GAIN B]

Adjusts Bch gain of the data selected in [FILE NO.].

[−100]…[+100]

  • Factory setting: [0]

[W H SAW R]

Adjusts Rch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform.

[−100]…[+100]

  • Factory setting: [0]

[W H SAW G]

Adjusts Gch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform.

[−100]…[+100]

  • Factory setting: [0]

[W H SAW B]

Adjusts Bch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform.

[−100]…[+100]

  • Factory setting: [0]

[W H PARA R]

Adjusts Rch white shading for the data selected in [FILE NO.] horizontally using a parabolic waveform.

[−100]…[+100]

  • Factory setting: [0]

[W H PARA G]

Adjusts Gch white shading for the data selected in [FILE NO.] horizontally using a parabolic waveform.

[−100]…[+100]

  • Factory setting: [0]

[W H PARA B]

Adjusts Bch white shading for the data selected in [FILE NO.] horizontally using a parabolic waveform.

[−100]…[+100]

  • Factory setting: [0]

[W V SAW R]

Adjusts Rch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform.

[−100]…[+100]

  • Factory setting: [0]

[W V SAW G]

Adjusts Gch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform.

[−100]…[+100]

  • Factory setting: [0]

[W V SAW B]

Adjusts Bch white shading for the data selected in [FILE NO.] vertically using a saw-toothed waveform.

[−100]…[+100]

  • Factory setting: [0]

[W V PARA R]

Adjusts Rch white shading for the data selected in [FILE NO.] vertically using a parabolic waveform.

[−100]…[+100]

  • Factory setting: [0]

[W V PARA G]

Adjusts Gch white shading for the data selected in [FILE NO.] vertically using a parabolic waveform.

[−100]…[+100]

  • Factory setting: [0]

[W V PARA B]

Adjusts Bch white shading for the data selected in [FILE NO.] vertically using a parabolic waveform.

[−100]…[+100]

  • Factory setting: [0]

[EXTENDER1]

Sets the magnification of lens extender 1.

[NONE], [0.1]…[9.9]

  • Factory setting: [2.0]

[EXTENDER2]

Sets the magnification of lens extender 2.

[NONE], [0.1]…[9.9]

  • Factory setting: [NONE]

[EXTENDER3]

Sets the magnification of lens extender 3.

[NONE], [0.1]…[9.9]

  • Factory setting: [NONE]

[EXTENDER4]

Sets the magnification of lens extender 4.

[NONE], [0.1]…[9.9]

  • Factory setting: [NONE]

[F DROP ADJUST]

Item

Description of settings

[F DROP RANGE]

Sets the determination reference value for the F drop of the lens.

[1]…[40]

  • Factory setting: [10]

[BLACK SHADING]

Item

Description of settings

[CORRECT]

Enables/disables the auto correction function of black shading.

[OFF], [ON]

  • Factory setting: [ON]

[DETECTION]

Selects whether to execute auto correction function of black shading.

[NO], [YES]

[SAVE]

Selects whether to save the auto correction data.

[NO], [YES]

[CLEAR]

Selects whether to clear the auto correction data.

[NO], [YES]

[FAN SETTING]

Item

Description of settings

[FAN]

[FAN MODE]

Sets the operation mode of the air cooling fan.

[NORMAL], [POWERFUL]

  • Factory setting: [NORMAL]

[DATE/TIME]

Item

Description of settings

[PRESENT]

Displays the present date and time.

[DATE YY]

Sets the year.

[18]…[99]

  • Factory setting: [18]

[DATE MM]

Sets the month.

[01]…[12]

  • Factory setting: [01]

[DATE DD]

Sets the day.

[01]…[31]

  • Factory setting: [01]

[TIME HH]

Sets the hour.

[00]…[23]

  • Factory setting: [00]

[TIME MM]

Sets the minute.

[00]…[59]

  • Factory setting: [00]

[SET EXECUTE]

Selects whether to save the configured details.

[NO], [YES]

[RESET]

Selects whether to reset the settings.

[NO], [YES]

[INITIALIZE]

[INITIALIZE] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

Item

Description of settings

[MENU INITIALIZE]

Restores the value of [MAIN MENU] to their factory settings.

[YES], [NO]

[READ USER ALL DATA]

Restores the values of [MAIN MENU], scene file and user file to their factory settings.

[YES], [NO]

[READ FACTORY ALL DATA]

Restores the values of [MAIN MENU], scene file, user file, and the factory adjusted values to their factory settings.

[YES], [NO]

[UPDATE]

[UPDATE] cannot be selected right after the power is turned on, because boot of the camera is in progress.

This is not an error. Perform operation after a while.

Description of settings

Updates the software.

  • Execute the update of the software with the update image file stored in the SD memory card.
  • The busy lamp (next to the SD memory card slot) and the back tally lamp flash during the update of software is executing.

[YES], [NO]

  • Factory setting: [NO]