[PAINT]

[COLOR REPRODUCTION]

Item

Description of settings

[COLOR TONE]

Sets the color reproduction base.

[NORMAL], [Ver. 0E.0D(0B.0B)], [Ver. 0E.11]

  • Factory setting: [NORMAL]

[PAINT SWITCH]

Item

Description of settings

[BLACK SHADING]

Enables/disables the black shading.

[OFF], [ON]

  • Factory setting: [ON]

[WHITE SHADING]

Enables/disables the white shading (saw-toothed waveform or parabolic waveform).

[OFF], [ON]

  • Factory setting: [ON]

[FLARE]

Enables/disables flare.

[OFF], [ON]

  • Factory setting: [ON]

[GAMMA]

Enables/disables gamma.

[OFF], [ON]

  • Factory setting: [ON]

[BLACK GAMMA]

Enables/disables black gamma.

[OFF], [ON]

  • Factory setting: [OFF]

[KNEE]

Enables/disables knee.

[OFF], [ON]

  • Factory setting: [ON]

[WHITE CLIP]

Enables/disables white clips.

[OFF], [ON]

  • Factory setting: [ON]

[DRS SW]

Enables/disables dynamic range stretcher.

[OFF], [ON]

In the UHD mode, [---] is displayed.

  • Factory setting: [OFF]

[DETAIL]

Enables/disables the detail.

[OFF], [ON]

  • Factory setting: [ON]

[SKIN TONE DETAIL]

Enables/disables the skin tone detail.

[OFF], [ON]

  • Factory setting: [OFF]

[MATRIX]

Enables/disables matrix (linear matrix/12-axis color correction).

[OFF], [ON]

  • Factory setting: [OFF]

[LINEAR MATRIX]

Enables/disables linear matrix.

[OFF], [ON]

  • Factory setting: [OFF]

[COLOR CORRECT]

Enables/disables 12-axis color correction.

[OFF], [ON]

  • Factory setting: [OFF]

[PEDESTAL]

Item

Description of settings

[MASTER PEDESTAL]

Adjusts the black level of the master pedestal.

[99]…[99]

  • Factory setting: [0]

[R PEDESTAL]

Sets the correction level of red to the master pedestal.

[800]…[+800]

  • Factory setting: [0]

[G PEDESTAL]

Sets the correction level of green to the master pedestal.

[800]…[+800]

  • Factory setting: [0]

[B PEDESTAL]

Sets the correction level of blue to the master pedestal.

[800]…[+800]

  • Factory setting: [0]

[PEDESTAL OFFSET]

Sets whether to maintain the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.

[ON]: Maintains the values set in [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL].

[OFF]: Sets [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL] to [0].

  • Factory setting: [OFF]

[MASTER PEDESTAL RANGE]

Sets the variable amount of the master pedestal.

[NORMAL]: Current variable amount

[WIDE]: Double of current variable amount

  • Factory setting: [NORMAL]

[CHROMA]

Item

Description of settings

[CHROMA LEVEL SWITCH]

Enables/disables the gain adjustment of chroma.

[OFF], [ON]

  • Factory setting: [OFF]

[CHROMA LEVEL]

Sets the gain adjustment of chroma.

[100%]…[+40%]

  • Factory setting: [0%]

[COLOR TEMP SETTING]

Item

Description of settings

[COLOR TEMP PRESET]

[COLOR TEMP PRE SWITCH]

Enables/disables the color temperature adjustment.

[OFF], [ON]

  • Factory setting: [OFF]

[COLOR TEMP]

Sets the color temperature when [COLOR TEMP PRE SWITCH] is [ON].

[2000K]…[15000K]

  • Factory setting: [3200K]

[R GAIN]

Sets the correction level of red to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[B GAIN]

Sets the correction level of blue to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[G AXIS]

Sets the correction level of green to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[COLOR TEMP ACH/BCH]

When the camera is connected to the system, only [COLOR TEMP ACH] can be set.

[COLOR TEMP ACH]

Sets the color temperature when the <WHITE BAL> switch is <A>.

[2000K]…[15000K]

  • Factory setting: [3200K]

[R GAIN ACH]

Sets the correction level of red to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[B GAIN ACH]

Sets the correction level of blue to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[G AXIS ACH]

Sets the correction level of green to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[COLOR TEMP BCH]

Sets the color temperature when the <WHITE BAL> switch is <B>.

[2000K]…[15000K]

  • Factory setting: [3200K]

[R GAIN BCH]

Sets the correction level of red to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[B GAIN BCH]

Sets the correction level of blue to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[G AXIS BCH]

Sets the correction level of green to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[COLOR TEMP USER SW]

[COLOR TEMP SW]

Enables/disables the [COLOR TEMP USER SW] item.

[OFF], [ON]

  • Factory setting: [OFF]

[COLOR TEMP]

Sets the color temperature when any of the <USER 1>/<USER 2>/<USER 3> buttons are set to [C.TEMP] and the setting is enabled.

[2000K]…[15000K]

  • Factory setting: [3200K]

[R GAIN]

Sets the correction level of red to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[B GAIN]

Sets the correction level of blue to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[G AXIS]

Sets the correction level of green to the color temperature.

[400]…[+400]

  • Factory setting: [0]

[RGB GAIN CONTROL SETTING]

Item

Description of settings

[G GAIN REL CONTROL SWITCH]

Enables/disables the relative value control of Gch gain.

[OFF], [ON]

  • Factory setting: [OFF]

[RGB GAIN PRESET]

[R GAIN]

Sets the preset value of Rch gain.

[1000]…[+1000]

  • Factory setting: [0]

[G GAIN]

Sets the preset value of Gch gain.

[1000]…[+1000]

  • Factory setting: [0]

[B GAIN]

Sets the preset value of Bch gain.

[1000]…[+1000]

  • Factory setting: [0]

[RGB GAIN ACH/BCH]

When the camera is connected to the CCU, only [R GAIN ACH]/[G GAIN ACH]/[B GAIN ACH]/[GAIN OFFSET ACH] can be set.

[R GAIN ACH]

Sets the correction level of red to the gain.

[1000]…[+1000]

  • Factory setting: [0]

[G GAIN ACH]

Sets the correction level of green to the gain.

[1000]…[+1000]

  • Factory setting: [0]

[B GAIN ACH]

Sets the correction level of blue to the gain.

[1000]…[+1000]

  • Factory setting: [0]

[GAIN OFFSET ACH]

Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance.

[ON]: Maintains the values set in [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH].

[OFF]: Sets [R GAIN ACH], [G GAIN ACH], and [B GAIN ACH] to [0].

  • Factory setting: [OFF]

[R GAIN BCH]

Sets the correction level of red to the gain.

[1000]…[+1000]

  • Factory setting: [0]

[G GAIN BCH]

Sets the correction level of green to the gain.

[1000]…[+1000]

  • Factory setting: [0]

[B GAIN BCH]

Sets the correction level of blue to the gain.

[1000]…[+1000]

  • Factory setting: [0]

[GAIN OFFSET BCH]

Sets whether to maintain the Rch, Gch, and Bch gain levels when adjusting the automatic white balance.

[ON]: Maintains the values set in [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH].

[OFF]: Sets [R GAIN BCH], [G GAIN BCH], and [B GAIN BCH] to [0].

  • Factory setting: [OFF]

[WHITE SHADING]

Item

Description of settings

[CORRECT]

Enables/disables the white shading (saw-toothed waveform or parabolic waveform) correction.

[OFF], [ON]

  • Factory setting: [ON]

[H SAW R]

Adjusts the white shading gain for Rch horizontally using a saw-toothed waveform.

[100]…[+100]

  • Factory setting: [0]

[H SAW G]

Adjusts the white shading gain for Gch horizontally using a saw-toothed waveform.

[100]…[+100]

  • Factory setting: [0]

[H SAW B]

Adjusts the white shading gain for Bch horizontally using a saw-toothed waveform.

[100]…[+100]

  • Factory setting: [0]

[H PARA R]

Adjusts the white shading gain for Rch horizontally using a parabolic waveform.

[100]…[+100]

  • Factory setting: [0]

[H PARA G]

Adjusts the white shading gain for Gch horizontally using a parabolic waveform.

[100]…[+100]

  • Factory setting: [0]

[H PARA B]

Adjusts the white shading gain for Bch horizontally using a parabolic waveform.

[100]…[+100]

  • Factory setting: [0]

[V SAW R]

Adjusts the white shading gain for Rch vertically using a saw-toothed waveform.

[100]…[+100]

  • Factory setting: [0]

[V SAW G]

Adjusts the white shading gain for Gch vertically using a saw-toothed waveform.

[100]…[+100]

  • Factory setting: [0]

[V SAW B]

Adjusts the white shading gain for Bch vertically using a saw-toothed waveform.

[100]…[+100]

  • Factory setting: [0]

[V PARA R]

Adjusts the white shading gain for Rch vertically using a parabolic waveform.

[100]…[+100]

  • Factory setting: [0]

[V PARA G]

Adjusts the white shading gain for Gch vertically using a parabolic waveform.

[100]…[+100]

  • Factory setting: [0]

[V PARA B]

Adjusts the white shading gain for Bch vertically using a parabolic waveform.

[100]…[+100]

  • Factory setting: [0]

[FLARE]

Item

Description of settings

[FLARE]

Enables/disables flare correction.

[OFF], [ON]

  • Factory setting: [ON]

[MASTER FLARE]

Adjusts the master flare.

[200]…[+200]

  • Factory setting: [0]

[R FLARE]

Adjusts the Rch flare.

[200]…[+200]

  • Factory setting: [0]

[G FLARE]

Adjusts the Gch flare.

[200]…[+200]

  • Factory setting: [0]

[B FLARE]

Adjusts the Bch flare.

[200]…[+200]

  • Factory setting: [0]

[GAMMA/BLACK GAMMA]

Item

Description of settings

[GAMMA]

Enables/disables gamma correction.

This cannot be set in HDR mode.

[OFF], [ON]

  • Factory setting: [ON]

[GAMMA MODE SELECT]

Selects the type of gamma.

[HD], [FILMLIKE1], [FILMLIKE2], [FILMLIKE3], [FILM REC], [VIDEO REC]

  • Factory setting: [HD]

[MASTER GAMMA]

Adjusts the gamma characteristic.

[0.35]…[0.75]

  • Factory setting: [0.45]

[BLACK STRETCH LEVEL]

(Only when [FILM REC] is set) Sets the position of the gamma stretch.

[0%]…[30%]

  • Factory setting: [0%]

[DYNAMIC LEVEL]

(Only when [FILM REC] is set) Sets dynamic range.

[200%], [300%], [400%], [500%]

  • Factory setting: [500%]

[KNEE POINT]

(Only when [VIDEO REC] is set) Sets the knee point.

[30]…[90]

  • Factory setting: [30]

[KNEE SLOPE]

(Only when [VIDEO REC] is set) Sets the knee slope.

[150%], [200%], [250%], [300%], [350%], [400%], [450%], [500%], [550%], [600%]

  • Factory setting: [150%]

[BLACK GAMMA]

Enables/disables black gamma.

This cannot be set when [MAIN MENU] → [PAINT] → [DRS] → [DRS] → [ON] is set.

[OFF], [ON]

  • Factory setting: [OFF]

[MASTER BLACK GAMMA]

Adjusts the gamma characteristic adjacent to black.

[48]…[+48]

  • Factory setting: [0]

[INITIAL GAMMA]

Sets the gamma initial slope.

When [GAMMA MODE SELECT] is [HD]: [4.0]/[4.5]/[5.0]

When [GAMMA MODE SELECT] is [FILMLIKE1]/[FILMLIKE2]/[FILMLIKE3]: [4.5] (fixed)

When [GAMMA MODE SELECT] is [FILM REC]/[VIDEO REC]: [4.5] (fixed)

  • Factory setting: [4.5]

[KNEE]

Item

Description of settings

[KNEE]

Enables/disables the knee function.

This cannot be set in HDR mode.

[OFF], [ON]

  • Factory setting: [ON]

[KNEE MASTER POINT]

Sets the knee point position.

[080.00%]…[110.00%] (0.25% step)

  • Factory setting: [95.00%]

[KNEE MASTER SLOPE]

Sets the knee slope.

[00]…[199]

  • Factory setting: [130]

[WHITE CLIP]

Item

Description of settings

[WHITE CLIP]

Enables/disables the white clip function.

This cannot be set in HDR mode.

[OFF], [ON]

  • Factory setting: [ON]

[MASTER WHITE CLIP LEVEL]

Sets the white clip level.

[80%]…[109%]

  • Factory setting: [109%]

[HI-COLOR]

Sets whether to improve the color reproduction in high-luminance areas.

[OFF], [ON]

  • Factory setting: [OFF]

[DRS]

Item

Description of settings

[DRS]

Enables/disables the dynamic range stretcher function. Set this to [ON] to automatically adjust the contrast.

This cannot be set in HDR mode.

[OFF], [ON]

In the UHD mode, [---] is displayed.

  • Factory setting: [OFF]

[EFFECT DEPTH]

Sets the compression level of the high-luminance areas of the dynamic range stretcher function. Set a larger value to increase the compression level of the high-luminance areas.

[1]…[5]

In the UHD mode, [---] is displayed.

  • Factory setting: [5]

[DETAIL SETTING]

[DETAIL SETTING] effects are enabled only for CCU output.

Item

Description of settings

[DETAIL]

Enables/disables all detail functions.

[OFF], [ON]

  • Factory setting: [ON]

[MASTER DETAIL]

Sets the master detail.

[31]…[+31]

  • Factory setting: [0]

[H DETAIL LEVEL]

Sets the correction level of the horizontal detail.

[0]…[63]

  • Factory setting: [0]

[V DETAIL LEVEL]

Sets the correction level of the vertical detail.

[0]…[63]

  • Factory setting: [0]

[PEAK FREQUENCY]

Sets the peak frequency of the horizontal detail.

[0]…[29]

  • Factory setting: [0]

[V DETAIL FREQUENCY]

Sets the vertical detail frequency.

[0]…[31]

  • Factory setting: [0]

[CRISP]

Sets the detail signal noise removal level.

[00]…[63]

  • Factory setting: [5] (UHD mode), [0] (HD mode)

[DETAIL GAIN(+)]

Sets the detail level in the + (upward) direction.

[31]…[+31]

  • Factory setting: [0]

[DETAIL GAIN(−)]

Sets the detail level in the − (downward) direction.

[31]…[+31]

  • Factory setting: [0]

[KNEE APERTURE LEVEL]

Adjusts the knee aperture level.

This cannot be set in HDR mode.

[00]…[5]

  • Factory setting: [0]

[DETAIL KNEE]

Adjusts the detail components of knee.

This cannot be set in HDR mode.

[00]…[15]

  • Factory setting: [0]

[LEVEL DEPENDENT SWITCH]

Enables/disables the function to remove details of dark areas.

This cannot be set in HDR mode.

[OFF], [ON]

  • Factory setting: [OFF]

[LEVEL DEPENDENT]

Sets the level to remove details of dark areas.

[00]…[15]

  • Factory setting: [8]

[DOWNCON SETTING]

Set the details for down-converted signals.

This is available only when the 4K OPTION board is fitted and when in the UHD mode.

[DOWNCON SETTING] effects are enabled only for CCU output.

Item

Description of settings

[CHROMA]

[CHROMA LEVEL SWITCH]

Enables/disables the gain adjustment of chroma.

[OFF], [ON]

  • Factory setting: [OFF]

[CHROMA LEVEL]

Sets the gain adjustment of chroma.

[100%]…[+40%]

  • Factory setting: [0%]

[DETAIL SETTING]

[DETAIL]

Enables/disables all detail functions.

[OFF], [ON]

  • Factory setting: [ON]

[MASTER DETAIL]

Sets the master detail.

[31]…[+31]

  • Factory setting: [0]

[H DETAIL LEVEL]

Sets the correction level of the horizontal detail.

[0]…[63]

  • Factory setting: [0]

[V DETAIL LEVEL]

Sets the correction level of the vertical detail.

[0]…[63]

  • Factory setting: [0]

[PEAK FREQUENCY]

Sets the peak frequency of the horizontal detail.

[0]…[29]

  • Factory setting: [0]

[V DETAIL FREQUENCY]

Sets the vertical detail frequency.

[0]…[31]

  • Factory setting: [0]

[CRISP]

Sets the detail signal noise removal level.

[00]…[63]

  • Factory setting: [10]

[DETAIL GAIN(+)]

Sets the detail level in the + (upward) direction.

[31]…[+31]

  • Factory setting: [0]

[DETAIL GAIN(−)]

Sets the detail level in the − (downward) direction.

[31]…[+31]

  • Factory setting: [0]

[KNEE APERTURE LEVEL]

Adjusts the knee aperture level.

This cannot be set in HDR mode.

[00]…[5]

  • Factory setting: [0]

[DETAIL KNEE]

Adjusts the detail components of knee.

This cannot be set in HDR mode.

[00]…[15]

  • Factory setting: [0]

[LEVEL DEPENDENT SWITCH]

Enables/disables the function to remove details of dark areas.

This cannot be set in HDR mode.

[OFF], [ON]

  • Factory setting: [OFF]

[LEVEL DEPENDENT]

Sets the level to remove details of dark areas.

[00]…[15]

  • Factory setting: [8]

[SKIN TONE DETAIL SETTING]

[SKIN TONE DETAIL]

Enables/disables the skin tone detail function.

[OFF], [ON]

  • Factory setting: [OFF]

[SKIN GET]

Selects whether to automatically obtain the color saturation and hue information from the cursor position.

[NO], [YES]

[MEMORY SELECT]

Selects the skin tone table of the subject to apply the skin tone table to.

[A], [B], [C]

  • Factory setting: [A]

[CURSOR]

Shows/hides the box cursor in the center of the screen.

[OFF], [ON]

  • Factory setting: [OFF]

[H POSITION]

Adjusts the horizontal position of the cursor.

[0%]…[100%] (0.25% step)

  • Factory setting: [50%]

[V POSITION]

Adjusts the vertical position of the cursor.

[0%]…[100%] (0.25% step)

  • Factory setting: [50%]

[ZEBRA]

Enables/disables the zebra display.

[OFF], [ON]

  • Factory setting: [OFF]

[ZEBRA EFFECT MEMORY]

Selects the table of the zebra display.

[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]

  • Factory setting: [A+B+C]

[SKIN TONE EFFECT MEMORY]

Selects the skin tone table used to apply the skin tone detail.

[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]

  • Factory setting: [A+B+C]

[SKIN TONE CRISP]

Adjusts the skin tone detail.

[63]…[+63]

  • Factory setting: [+63]

[I CENTER]

Sets the center position on the I axis (the area where the skin tone effect is applied).

[0]…[255]

  • Factory setting: [140]

[I WIDTH]

Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the center.

[0]…[255]

  • Factory setting: [20]

[Q WIDTH]

Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the center.

[0]…[255]

  • Factory setting: [43]

[Q PHASE]

Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.

[0]…[359]

  • Factory setting: [99]

[SKIN TONE DETAIL SETTING]

Item

Description of settings

[SKIN TONE DETAIL]

Enables/disables the skin tone detail function.

This cannot be set if [MAIN MENU] → [PAINT] → [DETAIL SETTING] → [DETAIL] → [OFF] is set.

[OFF], [ON]

  • Factory setting: [OFF]

[SKIN GET]

Selects whether to automatically obtain the color saturation and hue information from the cursor position.

[NO], [YES]

[MEMORY SELECT]

Selects the skin tone table of the subject to apply the skin tone table to.

[A], [B], [C]

  • Factory setting: [A]

[CURSOR]

Shows/hides the box cursor in the center of the screen.

[OFF], [ON]

  • Factory setting: [OFF]

[H POSITION]

Adjusts the horizontal position of the cursor.

[0%]…[100%] (0.25% step)

  • Factory setting: [50%]

[V POSITION]

Adjusts the vertical position of the cursor.

[0%]…[100%] (0.25% step)

  • Factory setting: [50%]

[ZEBRA]

Enables/disables the zebra display.

[OFF], [ON]

  • Factory setting: [OFF]

[ZEBRA EFFECT MEMORY]

Selects the table of the zebra display.

[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]

  • Factory setting: [A+B+C]

[SKIN TONE EFFECT MEMORY]

Selects the skin tone table used to apply the skin tone detail.

[A], [B], [C], [A+B], [A+C], [B+C], [A+B+C]

  • Factory setting: [A+B+C]

[SKIN TONE CRISP]

Adjusts the skin tone detail.

[63]…[+63]

  • Factory setting: [+63]

[I CENTER]

Sets the center position on the I axis (the area where the skin tone effect is applied).

[0]…[255]

  • Factory setting: [140] (UHD mode), [33] (HD mode)

[I WIDTH]

Sets the width of the area where the skin tone effect is applied on the I axis with [I CENTER] being the center.

[0]…[255]

  • Factory setting: [20] (UHD mode), [8] (HD mode)

[Q WIDTH]

Sets the width of the area where the skin tone effect is applied on the Q axis with [I CENTER] being the center.

[0]…[255]

  • Factory setting: [43] (UHD mode), [28] (HD mode)

[Q PHASE]

Sets the phase of the area where the skin tone effect is applied with the Q axis being the reference.

[0]…[359]

  • Factory setting: [99] (UHD mode), [82] (HD mode)

[LINEAR MATRIX]

Item

Description of settings

[MATRIX]

Enables/disables the matrix function.

[OFF], [ON]

  • Factory setting: [OFF]

[LINEAR MATRIX]

Enables/disables the linear matrix function.

[OFF], [ON]

  • Factory setting: [OFF]

[LINEAR TABLE]

Selects the table for linear matrix.

[A], [B]

  • Factory setting: [A]

[COLOR CORRECT]

Enables/disables the 12-axis color correction function.

[OFF], [ON]

  • Factory setting: [OFF]

[COLOR CORRECT TABLE]

Selects the table for color correction.

[A], [B]

  • Factory setting: [A]

[MATRIX R-G]

Adjusts the linear matrix between red and green.

This item is not available when [LINEAR MATRIX] is set to [OFF].

[31]…[+31]

  • Factory setting: [0]

[MATRIX R-B]

Adjusts the linear matrix between red and blue.

This item is not available when [LINEAR MATRIX] is set to [OFF].

[31]…[+31]

  • Factory setting: [0]

[MATRIX G-R]

Adjusts the linear matrix between green and red.

This item is not available when [LINEAR MATRIX] is set to [OFF].

[31]…[+31]

  • Factory setting: [0]

[MATRIX G-B]

Adjusts the linear matrix between green and blue.

This item is not available when [LINEAR MATRIX] is set to [OFF].

[31]…[+31]

  • Factory setting: [0]

[MATRIX B-R]

Adjusts the linear matrix between blue and red.

This item is not available when [LINEAR MATRIX] is set to [OFF].

[31]…[+31]

  • Factory setting: [0]

[MATRIX B-G]

Adjusts the linear matrix between blue and green.

This item is not available when [LINEAR MATRIX] is set to [OFF].

[31]…[+31]

  • Factory setting: [0]

[COLOR CORRECTION]

Item

Description of settings

[MATRIX]

Enables/disables the matrix function.

[OFF], [ON]

  • Factory setting: [OFF]

[LINEAR MATRIX]

Enables/disables the linear matrix function.

[OFF], [ON]

  • Factory setting: [OFF]

[LINEAR TABLE]

Selects the table for linear matrix.

[A], [B]

  • Factory setting: [A]

[COLOR CORRECT]

Enables/disables the 12-axis color correction function.

[OFF], [ON]

  • Factory setting: [OFF]

[COLOR CORRECT TABLE]

Selects the table for color correction.

[A], [B]

  • Factory setting: [A]

[R SAT]

Adjusts the color saturation of red.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[R_MG SAT]

Adjusts the color saturation between red and magenta.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[MG_SAT]

Adjusts the color saturation of magenta.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[MG_B SAT]

Adjusts the color saturation between magenta and blue.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[B SAT]

Adjusts the color saturation of blue.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[B_CY SAT]

Adjusts the color saturation between blue and cyan.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[CY SAT]

Adjusts the color saturation of cyan.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[CY_G SAT]

Adjusts the color saturation between cyan and green.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[G SAT]

Adjusts the color saturation of green.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[G_YL SAT]

Adjusts the color saturation between green and yellow.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[YL SAT]

Adjusts the color saturation of yellow.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[YL_R SAT]

Adjusts the color saturation between yellow and red.

This item is not available when [COLOR CORRECT] is set to [OFF].

[63]…[+63]

  • Factory setting: [0]

[R PHASE]

Adjusts the hue of red.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[R_MG PHASE]

Adjusts the hue between red and magenta.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[MG_PHASE]

Adjusts the hue of magenta.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[MG_B PHASE]

Adjusts the hue between magenta and blue.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[B PHASE]

Adjusts the hue of blue.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[B_CY PHASE]

Adjusts the hue between blue and cyan.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[CY PHASE]

Adjusts the hue of cyan.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[CY_G PHASE]

Adjusts the hue between cyan and green.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[G PHASE]

Adjusts the hue of green.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[G_YL PHASE]

Adjusts the hue between green and yellow.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[YL PHASE]

Adjusts the hue of yellow.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[YL_R PHASE]

Adjusts the hue between yellow and red.

This item is not available when [COLOR CORRECT] is set to [OFF].

[127]…[+127]

  • Factory setting: [0]

[SKIN CORRECTION]

Item

Description of settings

[SKIN AREA SW]

Enables/disables the function to finely adjust the color of the skin tone area.

[OFF], [ON]

  • Factory setting: [OFF]

[SKIN AREA TABLE]

Selects the table for the skin tone area.

[A], [B]

  • Factory setting: [A]

[SKIN AREA HUE]

Finely adjusts the hue of the skin tone area.

[127]…[+127]

  • Factory setting: [0]

[SKIN AREA TONE]

Finely adjusts the tone of the skin tone area.

[63]…[+63]

  • Factory setting: [0]

[DNR]

Item

Description of settings

[DNR SW]

Enables/disables the noise reduction function.

[OFF], [ON]

  • Factory setting: [ON]

[DNR LEVEL]

Sets the level of noise reduction.

[1]…[5]

  • Factory setting: [3]

[SCENE FILE]

Item

Description of settings

[MODE]

Selects the operation mode.

[LOAD], [STORE]

  • Factory setting: [LOAD]

[FILE NO.]

Selects a file number.

When [MODE] is [LOAD]: [OFF], [1]…[8]

When [MODE] is [STORE]: [1]…[8]

  • Factory setting: [1]

[FILE NAME]

Enters a file name. (15 characters or less)

  • Factory setting: [SCENE1]

[EXECUTE]

Selects whether to execute with the configured settings.

[NO], [YES]

[ROP CONTROL]

Item

Description of settings

[CONTROL ROTATION MODE]

Sets the control rotation mode of ROP.

[MODE1], [MODE2]

  • Factory setting: [MODE2]