[IN/OUT SELECT]

Item

Description of settings

[CALL TALLY]

Sets whether the rear tally lamp is to be lit up when called.

[OFF]: Turned off.

[R]: Red tally lights up.

[T]: Up tally lights up.

[R&T]: Red tally and up tally light up.

  • Factory setting: [OFF]

[TALLY GUARD]

Enables/disables automatic white balance, automatic black balance, and automatic setup when the tally lamp is lit.

[OFF], [ON]

  • Factory setting: [OFF]

[HD-SDI1 OUT]

Configures the video output from the <HD SDI1> terminal.

[CAM]: Outputs camera images.

[HD PROMPT]: Outputs HD prompter video images.

  • Factory setting: [CAM]

[HD-SDI1 OUTPUT FORMAT]

Sets the signal format of the video output from the <HD SDI1> terminal.

[1080i], [1080P], [720P]

  • Factory setting: [1080i]

[HD-SDI1 OUTPUT ITEM]

Selects details of the characters superimposed on images output from the <HD SDI1> terminal.

[MENU ONLY]: Displays only on the menu.

[STATUS]: Displays all characters that are the same as in the viewfinder display.

  • Factory setting: [MENU ONLY]

[HD-SDI1 CHAR]

Sets whether to superimpose characters on images output from the <HD SDI1> terminal.

This cannot be set when the output format is [720P].

[OFF], [ON]

  • Factory setting: [OFF]

[HD-SDI1 CHAR SIZE]

Sets the size of the characters superimposed on images output from the <HD SDI1> terminal.

[LARGE], [SMALL]

  • Factory setting: [SMALL]

[HD-SDI1 3G-SDI]

Sets the output format when [HD-SDI1 OUT] is [CAM] and when the image output from the <HD SDI1> terminal is 3G output.

[LEVEL-A], [LEVEL-B]

  • Factory setting: [LEVEL-B]

NOTE

  • This is fixed to [LEVEL-A] when [HD-SDI1 OUT] is [HD PROMT].

[HD-SDI2 OUT]

Configures the video output from the <HD SDI2> terminal.

[CAM]: Outputs camera images.

[VF]: Outputs viewfinder images.

[RET]: Outputs return images.

[RET1], [RET2]: Outputs fixed return images.

  • Factory setting: [VF]

[HD-SDI2 OUTPUT FORMAT]

Sets the signal format of the video output from the <HD SDI2> terminal.

[1080i], [1080P], [720P]

  • Factory setting: [1080i]

[HD-SDI2 OUTPUT ITEM]

Selects details of the characters superimposed on images output from the <HD SDI2> terminal.

[MENU ONLY]: Displays only on the menu.

[STATUS]: Displays all characters that are the same as in the viewfinder display.

  • Factory setting: [MENU ONLY]

[HD-SDI2 CHAR]

Sets whether to superimpose characters on images output from the <HD SDI2> terminal.

This cannot be set when the output format is [720P].

[OFF], [ON]

  • Factory setting: [OFF]

[HD-SDI2 CHAR SIZE]

Sets the size of the characters superimposed on images output from the <HD SDI2> terminal.

[LARGE], [SMALL]

  • Factory setting: [SMALL]

[HD-SDI2 3G-SDI]

Sets the output format when [HD-SDI2 OUT] is [CAM] and when the image output from the <HD SDI2> terminal is 3G output.

[LEVEL-A], [LEVEL-B]

  • Factory setting: [LEVEL-B]

NOTE

  • This is fixed to [LEVEL-A] when [HD-SDI2 OUT] is other than [CAM].

[AUX I/O]

Configures the video output from the <AUX> terminal.

[PMT2 OUT], [HD TRUNK]

  • Factory setting: [PMT2 OUT]

[T-BAR CONNECT]

Sets whether to connect the T-BAR unit.

[OFF], [ON]

  • Factory setting: [OFF]

[LENS I/F]

Sets the lens interface.

[ANALOG], [SERIAL]

  • Factory setting: [SERIAL]

[DISPLAY STATUS/BAR OSD]

[CAM ID CHARACTER]

Sets the camera name.