For operations

Problem

Cause/solution

The camera cannot be turned on.

Does the power cable plugged into the power outlet securely?

The camera cannot be operated from the ROP (AK-HRP1000G) that is connected via IP.

Is the power turned on?

  • If the power lamp of the camera is not lit, the power of the camera is off.

Is a valid IP address of the camera set?

Is the correct camera to be operated selected?

Is the camera connected with the ROP (AK-HRP1000G) correctly?

  • Also refer to the Operating Instructions of AK-HRP1000G.

The ROP (AK-HRP1000G) may require upgrading to support the camera.

  • Contact your dealer.