Audio (input) function section

body_parts_audioinput

  1. <F.AUDIO LEVEL> dial

    Adjusts the recording level of the audio channel selected in the [AUDIO] menu → [REC CH SETTINGS] → [VOL. SELECT] when the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is set to <MANU>.

    • Set whether to enable the <F.AUDIO LEVEL> dial at the [AUDIO] menu → [REC CH SETTINGS] → [FRONT VOL. CH1] to [FRONT VOL. CH4].

  2. <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial

    Adjusts the recording level of the audio channel when the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is set to <MANU>.

    <AUDIO LEVEL CH1/3> dial: Adjusts the recording level of the audio channel 1 or the audio channel 3.

    <AUDIO LEVEL CH2/4> dial: Adjusts the recording level of the audio channel 2 or the audio channel 4.

    • Select the audio channel to adjust with the dial in the [AUDIO] menu → [REC CH SETTINGS] → [VOL. SELECT].

    • Dial is equipped with a lock mechanism. Adjust by turning the dial while pressing it in.

  3. <AUDIO IN CH1>/<AUDIO IN CH2>/<AUDIO IN CH3>/<AUDIO IN CH4> switch

    Selects the audio signal to input to the audio channel 1 to audio channel 4.

    <FRONT>: Inputs the audio signal of the microphone connected to the <MIC IN> terminal.

    <W.L.>: Inputs the audio signal from the wireless microphone receiver.

    <REAR>: Inputs the audio signal from the audio device connected to the <AUDIO IN CH1/3> terminal or the <AUDIO IN CH2/4> terminal.

  4. <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch

    Select the audio channel to adjust in the [AUDIO] menu → [REC CH SETTINGS] → [VOL. SELECT].

    <AUDIO SELECT CH1/3> switch: Switches the method to adjust the recording level for the audio channel 1 or audio channel 3 with <AUTO>/<MANU> (automatic/manual).

    <AUDIO SELECT CH2/4> switch: Switches the method to adjust the recording level for the audio channel 2 or audio channel 4 with <AUTO>/<MANU> (automatic/manual).

  5. Wireless microphone slot

    Mount the UniSlot wireless microphone receiver (optional).

  6. <LINE>/<MIC> selector switch

    Switches the audio signal input from the <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal.

    <LINE>: Inputs audio signals from line-input audio equipment.

    <MIC>: Inputs audio signals from the microphone.

  7. Microphone input power selector switch

    Turns on/off the power supply to the microphone connected to the <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal.

    <+48V>: Supplies +48 V power to the microphone.

    <OFF>: Does not supply power to the microphone.

  8. <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal

    Connects the audio equipment or the microphone.

    <AUDIO IN CH1/3> terminal: Inputs the audio signal to the audio channel 1 and the audio channel 3.

    <AUDIO IN CH2/4> terminal: Inputs the audio signal to the audio channel 2 and the audio channel 4.

  9. Cable holder

    Fixes HDMI cables, etc.

  10. Cable holder

    Fixes the cables for lights or microphone.

  11. <MIC IN> terminal

    Connects an external microphone (optional).

    • When using the phantom microphone, set to the [AUDIO] menu → [INPUT SETTINGS] → [FRONT MIC POWER] → [ON]. When it is set to [ON] and a microphone is not connected, low-frequency noise may occur. This is not a problem when a microphone is connected.