Displaying zebra pattern

The camera can display two types of zebra patterns.

When the <ZEBRA> switch of the viewfinder is set to <ON>, the zebra pattern currently set in the menu is displayed on the viewfinder screen.

Zebra patterns can also be displayed in the video output from <SDI OUT1>/<SDI OUT2>/<HDMI> terminals according to settings.

The level for displaying zebra patterns can be set in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].

Item

Description of settings

[ZEBRA1 DETECT]

Sets the level of zebra pattern 1 tilting to the right.

  • [0%]…[109%]

(Factory setting: [80%])

[ZEBRA2 DETECT]

Sets the level of zebra pattern 2 tilting to the left.

  • [0%]…[109%]

(Factory setting: [100%])

[ZEBRA2]

Selects the type of [ZEBRA2].

  • [ON], [SPOT], [OFF]

(Factory setting: [OFF])

[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.

co_other_zebra

When displaying the zebra pattern in the video output from <SDI OUT1> and <SDI OUT2> terminals, perform setting in the [VIDEO OUT/LCD/VF] menu → [SDI OUT1]/[SDI OUT2] → [SDI OUT ZEBRA].

Display of zebra pattern output to the <HDMI> terminal is based on the following setting.

  • [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [SIGNAL SEL]

  • [VIDEO OUT/LCD/VF] menu → [SDI OUT1]/[SDI OUT2] → [SDI OUT ZEBRA]