Audio (output) function section

body_parts_audiooutput

  1. <MONITOR> dial

    Adjusts the volume of the monitor audio during playback, recording, and recording standby.

  2. <ALARM> dial

    Adjusts the volume of the alarm from the built-in speaker and earphones.

    When set to the minimum position, the alarm cannot be heard.

  3. Built-in speaker

    EE audio is output during recording, and playback audio is output during playback.

    An alarm sound is output in sync with flashing/lighting of the <WARNING> lamp or warning indicator.

    Audio from the built-in speaker is automatically muted when earphones are connected to the <PHONES> terminal.

  4. <MONITOR SELECT> switch

    Selects audio output from the built-in speaker, earphones, and <AUDIO OUT> terminal interlocked with the audio channel selector switch.

    <CH1/3>: Outputs audio signal of the audio channel 1 or the audio channel 3.

    <ST>: Outputs the stereo audio signal of the audio channel 1 and the audio channel 2, or the audio channel 3 and the audio channel 4. Set to the MIX signal in the [AUDIO] menu → [OUTPUT SETTINGS] → [MONITOR SELECT] → [MIX].

    <CH2/4>: Outputs audio signal of the audio channel 2 or the audio channel 4.

    <MONITOR SELECT> switch

    Audio channel selector switch

    <CH1/2>

    <CH3/4>

    <CH1/3>

    Audio channel 1

    Audio channel 3

    <ST>

    Stereo output from audio channels 1 and 2*

    Stereo output from audio channels 3 and 4*

    <CH2/4>

    Audio channel 2

    Audio channel 4

    Switches between [STEREO] and [MIX] in the [AUDIO] menu → [OUTPUT SETTINGS] → [MONITOR SELECT].

  5. Audio channel selector switch

    Switches the audio channel output to the built-in speaker, earphones, and <AUDIO OUT> terminal.

    <CH1/2>: Outputs audio signal of the audio channel 1 and the audio channel 2.

    <CH3/4>: Outputs audio signal of the audio channel 3 and the audio channel 4.

  6. <PHONES> terminal

    This is a stereo mini jack terminal for the audio monitor earphones.

    Same audio is output for both the front and the rear sides.

  7. <AUDIO OUT> terminal

    Outputs the audio signal recorded in the audio channel 1 to audio channel 4.

    • The audio signal to be output is switched with the <MONITOR SELECT> switch.