Operating Instructions AJ-CX4000G

Print this page
Menu
  • Top
  • Network Connection

Network Connection

This chapter describes how to use the camera by connecting to a network.

Network connection
Preparing for connection
Network settings
Connecting to the iPhone/iPad or Android terminal
Connecting with the Remote Operation Panel (AK-HRP1000G/AK-HRP1005G)
Streaming function
NDI|HX function
Using the cloud service
Top of the page
  • Overview
    • Before using the camera
    • Accessories
    • When turning on the power for the first time
      • [AREA SETTINGS]
      • [TIME ZONE]
      • [CLOCK SETTING]
    • Use of the camera on a system
      • Basic configuration devices
      • Expanded configuration devices
      • Accessories
  • Description of Parts
    • Power supply and accessory mounting section
    • Audio (input) function section
    • Audio (output) function section
    • Shooting and recording/playback functions section
      • Shooting and recording (Camera unit)
      • Shooting and recording/playback functions section (Recording unit)
    • Menu operation section and thumbnail operation section
    • Time code section
    • Warning and status display section
    • Display inside the display window
      • Display of remaining memory card capacity, remaining battery level, and recording level
  • Preparation
    • Power supply
      • To use a battery
      • Attaching and setting the battery
      • Using external DC power supply
    • Mounting and adjusting the lens
      • Mounting the lens
      • Adjusting lens flange back
      • White shading compensation function
      • Chromatic aberration compensation function (CAC)
    • Preparing for audio input
      • Using the front microphone
      • Using the wireless microphone receiver
      • Using audio devices
    • Mounting accessories
      • Mounting the camera on a tripod
      • Attaching the shoulder strap
      • Attaching the rain cover
    • Charging the built-in battery
    • Setting the date/time of the internal clock
    • Inspections before shooting
      • Preparing to inspect
      • Inspecting the camera unit
      • Inspecting the memory recording functions
    • Preparing the memory card
      • Memory cards supported on the camera
    • Memory cards
      • Inserting the memory card
      • Removing the memory card
      • Preventing accidental erasure
      • Status of the card access lamp and the memory card
      • Memory card recording time
      • Handling recording data
  • Operation
    • Basic operation of the menu
      • Configuration of the menu
      • Basic operation of the menu
    • Menu display
      • Displaying the menu
      • Initializing the menu
    • Menu settings
      • [THUMBNAIL] menu
      • [CAMERA] menu
      • [SCENE FILE] menu
      • [AUDIO] menu
      • [VIDEO OUT/LCD/VF] menu
      • [RECORDING] menu
      • [NETWORK] menu
      • [SYSTEM] menu
      • [OTHERS] menu
      • [OPTION] menu
    • Factory setting value of the scene file
      • [SCENE FILE] menu
    • Target items for scene file/setup file/initialization
      • [THUMBNAIL] menu
      • [CAMERA] menu
      • [SCENE FILE] menu
      • [AUDIO] menu
      • [VIDEO OUT/LCD/VF] menu
      • [RECORDING] menu
      • [NETWORK] menu
      • [SYSTEM] menu
      • [OTHERS] menu
      • [OPTION] menu
  • Shooting
    • Basic procedures
      • Preparing power supply and inserting memory cards
      • Switch settings for shooting
      • Adjustments for shooting
      • Normal recording
    • Adjusting the white and black balance
      • White balance adjustment
      • Black balance adjustment
    • Setting the electronic shutter
      • Shutter mode
      • Setting the shutter mode/shutter speed
      • Setting synchro scan mode
    • Flash band compensation (FBC) function
      • Setting the flash band compensation function
    • Setting high dynamic range (HDR)
      • Recording in high dynamic range (HDR)
      • Playing back the signal recorded in high dynamic range (HDR)
    • Assigning function to the USER buttons
      • Selectable functions
      • [USER SW GAIN] switching setting
    • Selecting audio input signal and adjusting recording level
      • Selecting audio input signals
      • Adjusting recording level
    • Special recording function
      • Pre-recording
      • Relay recording
      • Simultaneous recording
      • Interval recording
      • Recording the proxy data
      • Hot swap recording
      • Recording check function
      • Clip metadata recording function
      • Shot mark recording function
      • Selecting the resolution, codec, and frame rate for recording video
    • Selecting external reference signal and genlock setting
      • Locking the video signal to the external reference signal
    • Setting of time data
      • Definition of time data
      • Setting user bits
      • How to input user bits
      • Setting time code
      • Externally locking the time code
    • Display of the viewfinder status
      • Lamp display in the viewfinder
      • Configuration of status display on viewfinder screen
      • Selecting display items on viewfinder screen
      • Screen display during shooting
      • Screen display during playback
      • Checking and displaying shooting status
      • Mode check display
    • Convenient shooting functions
      • Setting the marker display
      • Marker confirmation screen (marker select function)
      • Displaying zebra pattern
      • Focus assist function
      • Waveform monitor function
    • Adjusting and setting the LCD monitor
      • Using the LCD monitor
      • Mirror shooting
    • Adjusting and setting the viewfinder
      • Using the viewfinder
    • Handling setting data
      • File structure of the setting data
      • Operating SD cards
      • Setup file
    • Scene file
      • Scene files
      • Returning the setting value of the menu to the factory setting
      • Lens files
      • Writing and loading lens files to and from SD card
  • Playback
    • Thumbnail operation
      • Thumbnail operation overview
      • Thumbnail screen
      • Copying clips
      • Deleting clips
      • Protecting clips
      • Adding shot mark to a clip
      • Restoring clips
      • Linking the incomplete clips
      • Playing back clips
    • Useful playback function
      • Resume play
    • Still image recording function
  • Output
    • Output format
      • Format that can be output from the <SDI OUT1> terminal
      • Format that can be output from the <SDI OUT2> terminal
      • Format that can be output from the <HDMI> terminal
  • Connecting to External Devices
    • Connection function via the <USB DEVICE> terminal
      • Connecting to a computer in the card reader mode
    • Connecting with a recording device or a monitor
    • Connecting external devices and recording control function
      • Remote function
      • Confirming the control output status
    • Remote control by iPhone/iPad or Android terminal
    • Connecting the Remote Operation Panel (AK-HRP1000G/AK-HRP1005G)
  • Network Connection
    • Network connection
      • Available functions
    • Preparing for connection
      • For the wireless module AJ-WM50
      • For the wired LAN
      • For USB tethering
    • Network settings
      • Wireless LAN settings
      • Wired LAN settings
      • USB tethering setting
      • Specifying the network settings using the settings tool
      • Confirming the network status
      • Checking the network environment
      • Saving the check results
    • Connecting to the iPhone/iPad or Android terminal
      • Mounting the wireless module
      • Camera settings
      • Preparing the CX ROP app
      • Connecting to the CX ROP application
      • Operation while the CX ROP app is connected
    • Connecting with the Remote Operation Panel (AK-HRP1000G/AK-HRP1005G)
      • Camera settings
      • Setting the Remote Operation Panel (AK-HRP1000G/AK-HRP1005G)
      • Operation during remote control
    • Streaming function
      • Basic setting of the camera
      • Setting for each protocol and starting the streaming
      • Management of setting information
      • Entering the setting using the setting tool
    • NDI|HX function
      • Camera settings
    • Using the cloud service
      • Remote operation of the streaming
      • Contents upload
      • Other operations
  • Maintenance
    • Warning system
      • Warning list
      • Alert
      • Message
    • Recording function that cannot be used simultaneously
    • Updating the camera firmware
  • Specification
    • Dimensions
    • Specifications
      • General
      • Camera unit
      • Memory card recorder
      • Digital video
      • Digital audio
      • Streaming
      • Video output
      • Audio input/output
      • Other input/output
      • Monitor
    • Details of the connector signals
  • Download
  • Overview
  • Description of Parts
  • Preparation
  • Operation
  • Shooting
  • Playback
  • Output
  • Connecting to External Devices
  • Network Connection
  • Maintenance
  • Specification
  • Download
  • ABC

    Adjusting lens flange back

    Alert

    Audio input

    Battery

    Black balance

    Built-in battery

    CAC

    File

    Function

    Card reader mode

    Chromatic aberration compensation

    CAC file

    Function

    Clip

    Copying

    Deleting

    Display

    Link

    Operation

    Playback

    Protecting

    Restoring

    Clip metadata recording function

    Clock

    Cloud service

    Connector signal

    Counter data

    CX ROP app

  • DEF

    Date

    DC power supply

    Detail display

    Dimensions

    Display window

    Electronic shutter

    Enlarged display

    expressP2 card

    Card access lamp

    Folder structure

    Memory card

    Recording time

    Use

    External connection

    Card reader mode

    External equipment

    External power supply

    FBC function

    Firmware

    Flash band compensation function

    Focus assist function

    Focus square display

  • GHI

    Genlock

    HDR function

    High dynamic range function

    Hot swap recording

    Initialization

    Menu

    Scene files(1)

    Scene files(2)

    Target items

    Interval recording

  • JKL

    LCD monitor

    Lens

    Adjusting

    Lens files

  • MNO

    Maker display

    Memory card

    Folder structure

    Recording time

    Use

    Menu

    Basic operation

    Configuration

    Display

    Initialization

    Setting

    Menu items

    [AUDIO]

    [CAMERA]

    [NETWORK]

    [OPTION]

    [OTHERS]

    [RECORDING]

    [SCENE FILE]

    [SYSTEM]

    [THUMBNAIL]

    [VIDEO OUT/LCD/VF]

    Message

    microP2 card

    Card access lamp

    Folder structure

    Memory card

    Recording time

    Use

    Microphone

    Monochrome display

    MOV format

    Folder structure

    Format

    Memory card

    Recording time

    Volume label

    Network

    Connection

    CX ROP app

    Preparation

    Streaming function

    USB tethering

    Output format

  • PQRS

    P2 format

    Folder structure

    Format

    Memory card

    Recording time

    Volume label

    Peaking display

    Pre-recording

    Rain cover

    Recording check function

    Recording level

    Recording the proxy data

    Relay recording

    Remote function

    HDMI remote

    IP remote

    SDI remote

    Resume play

    Scene file

    Factory setting value

    Setting data

    Use

    Screen display

    During playback

    During shooting

    Mode check display

    Thumbnail screen

    SD card

    Card access lamp

    Folder structure

    Memory card

    Recording time

    Use

    Setting data

    CAC files

    File structure

    Lens files

    Scene file

    Setup file

    Setup file

    User data

    Shooting

    Inspection

    Procedures

    Standard recording

    Shot mark recording function

    Shoulder strap

    Simultaneous recording

    Specifications

    Still image recording function

    Streaming function

    Synchro scan mode

  • TUV

    Thumbnail

    Time code

    Time data

    Tripod

    User bits

    USER button

    User file

  • WXYZ

    Warning system

    Alert

    Message

    Warning

    Waveform monitor function

    White balance

    White shading compensation

    Wireless microphone receiver

    Wireless module

    Zebra pattern

  • ABC

    Adjusting lens flange back

    Alert

    Audio input

    Battery

    Black balance

    Built-in battery

    CAC

    File

    Function

    Card reader mode

    Chromatic aberration compensation

    CAC file

    Function

    Clip

    Copying

    Deleting

    Display

    Link

    Operation

    Playback

    Protecting

    Restoring

    Clip metadata recording function

    Clock

    Cloud service

    Connector signal

    Counter data

    CX ROP app

  • DEF

    Date

    DC power supply

    Detail display

    Dimensions

    Display window

    Electronic shutter

    Enlarged display

    expressP2 card

    Card access lamp

    Folder structure

    Memory card

    Recording time

    Use

    External connection

    Card reader mode

    External equipment

    External power supply

    FBC function

    Firmware

    Flash band compensation function

    Focus assist function

    Focus square display

  • GHI

    Genlock

    HDR function

    High dynamic range function

    Hot swap recording

    Initialization

    Menu

    Scene files(1)

    Scene files(2)

    Target items

    Interval recording

  • JKL

    LCD monitor

    Lens

    Adjusting

    Lens files

  • MNO

    Maker display

    Memory card

    Folder structure

    Recording time

    Use

    Menu

    Basic operation

    Configuration

    Display

    Initialization

    Setting

    Menu items

    [AUDIO]

    [CAMERA]

    [NETWORK]

    [OPTION]

    [OTHERS]

    [RECORDING]

    [SCENE FILE]

    [SYSTEM]

    [THUMBNAIL]

    [VIDEO OUT/LCD/VF]

    Message

    microP2 card

    Card access lamp

    Folder structure

    Memory card

    Recording time

    Use

    Microphone

    Monochrome display

    MOV format

    Folder structure

    Format

    Memory card

    Recording time

    Volume label

    Network

    Connection

    CX ROP app

    Preparation

    Streaming function

    USB tethering

    Output format

  • PQRS

    P2 format

    Folder structure

    Format

    Memory card

    Recording time

    Volume label

    Peaking display

    Pre-recording

    Rain cover

    Recording check function

    Recording level

    Recording the proxy data

    Relay recording

    Remote function

    HDMI remote

    IP remote

    SDI remote

    Resume play

    Scene file

    Factory setting value

    Setting data

    Use

    Screen display

    During playback

    During shooting

    Mode check display

    Thumbnail screen

    SD card

    Card access lamp

    Folder structure

    Memory card

    Recording time

    Use

    Setting data

    CAC files

    File structure

    Lens files

    Scene file

    Setup file

    Setup file

    User data

    Shooting

    Inspection

    Procedures

    Standard recording

    Shot mark recording function

    Shoulder strap

    Simultaneous recording

    Specifications

    Still image recording function

    Streaming function

    Synchro scan mode

  • TUV

    Thumbnail

    Time code

    Time data

    Tripod

    User bits

    USER button

    User file

  • WXYZ

    Warning system

    Alert

    Message

    Warning

    Waveform monitor function

    White balance

    White shading compensation

    Wireless microphone receiver

    Wireless module

    Zebra pattern

About this manual

Published: March 2022

© Panasonic Connect Co., Ltd. 2019-2022

W1219MS4032 -YI

DVQP2127VA