Configures the settings for the external output, the information to display in the LCD monitor or viewfinder and the output format.
[SDI OUT1]
[OUTPUT SW]
Enables/disables the output from the <SDI OUT1> terminal.
[ON]
Outputs the video.
[OFF]
Does not output the video.
(Factory setting: [ON])
[OUT FORMAT]
Selects the signal to output from the <SDI OUT1> terminal. The item that can be selected varies depending on the setting of the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC FORMAT].
[3840×2160p]
Outputs in 3840×2160p.
[1920×1080p]
Outputs in 1920×1080p.
[1920×1080i]
Outputs in 1920×1080i.
[1920×1080PsF]
Outputs in 1920×1080PsF.
[1280×720p]
Outputs in 1280×720p.
(Factory setting: [1920×1080i])
[3G-SDI OUT]
Sets the format of the 3G-SDI signal output from the <SDI OUT1> terminal.
Can be set when the 3G-SDI signal is output.
[LEVEL-A]
Selects the LEVEL-A method.
[LEVEL-B]
Selects the LEVEL-B DL method.
(Factory setting: [LEVEL-B])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT1> terminal (such as recorder) is to be controlled or not.
[ON]
Controls the recording operation of the external equipment.
[OFF]
Does not control the recording operation of the external equipment.
(Factory setting: [OFF])
[SDI OUT CHAR]
Sets whether to superimpose the character to the output from the <SDI OUT1> terminal.
[ON]
Superimposes.
[OFF]
Does not superimpose.
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT1> terminal.
The setting of the zebra signal is in accordance with the following setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
[ZEBRA1 DETECT], [ZEBRA2 DETECT], [ZEBRA2]
[ON]
Superimposes.
[OFF]
Does not superimpose.
(Factory setting: [OFF])
[SDI OUT HDR]
Sets the signal to output from the <SDI OUT1> terminal.
[SDR]
Outputs in the standard dynamic range.
[HDR]
Outputs in the high dynamic range.
(Factory setting: [HDR])
[MARKER SW]
Marker is displayed in the output from the <SDI OUT1> terminal.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[SDI OUT V-Log]
Sets the output signal from the <SDI OUT1> terminal when the [SYSTEM] menu → [COLOR SETTING] → [V-Log] is set.
[V-Log]
Outputs in same color as the recording image.
[V-709]
Outputs after converting to an image suitable for preview.
(Factory setting: [V-Log])
[SDI OUT2]
[OUTPUT SW]
Enables/disables the output from the <SDI OUT2> terminal.
[ON]
Outputs the video.
[OFF]
Does not output the video.
(Factory setting: [ON])
[OUT FORMAT]
Sets the signal to output from the <SDI OUT2> terminal. The item that can be selected varies depending on the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting.
[1920×1080p]
Outputs in 1920×1080p.
[1920×1080i]
Outputs in 1920×1080i.
[1920×1080PsF]
Outputs in 1920×1080PsF.
[1280×720p]
Outputs in 1280×720p.
[720×480i]
Outputs in 720×480i.
[720×576i]
Outputs in 720×576i.
(Factory setting: [1920×1080i])
[3G-SDI OUT]
Sets the format of the 3G-SDI signal output from the <SDI OUT2> terminal.
Can be set when the 3G-SDI signal is output.
[LEVEL-A]
Selects the LEVEL-A method.
[LEVEL-B]
Selects the LEVEL-B DL method.
(Factory setting: [LEVEL-B])
[SD-SDI EDH]
Sets whether to superimpose EDH when output from the <SDI OUT2> terminal is the SD signal (480i and 576i).
[ON]
Superimposes.
[OFF]
Does not superimpose.
(Factory setting: [ON])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT2> terminal (such as recorder) is to be controlled or not.
[ON]
Controls the recording operation of the external equipment.
[OFF]
Does not control the recording operation of the external equipment.
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT2> terminal.
The setting of the zebra signal is in accordance with the following setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
[ZEBRA1 DETECT], [ZEBRA2 DETECT], [ZEBRA2]
[ON]
Superimposes.
[OFF]
Does not superimpose.
(Factory setting: [OFF])
[SDI OUT HDR]
Sets the signal to output from the <SDI OUT2> terminal.
[SDR]
Outputs in the standard dynamic range.
[HDR]
Outputs in the high dynamic range.
(Factory setting: [HDR])
[MARKER SW]
Marker is displayed in the output from the <SDI OUT2> terminal.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[SDI OUT V-Log]
Sets the output signal from the <SDI OUT1> terminal when the [SYSTEM] menu → [COLOR SETTING] → [V-Log] is set.
[V-Log]
Outputs in same color as the recording image.
[V-709]
Outputs after converting to an image suitable for preview.
(Factory setting: [V-Log])
[SDI OUTPUT ITEM]
Sets the character content to superimpose on the output signal of the <SDI OUT1>/<SDI OUT2>/<HDMI> terminals.
[MENU ONLY]
Superimposes only the menu when displaying the menu. Normally, nothing is superimposed.
[TC]
Superimposes the time code. Superimposes only the menu when displaying the menu.
[STATUS]
Displays the same contents as all the characters displayed in the viewfinder and the LCD monitor. Superimposes only the menu when displaying the menu.
(Factory setting: [MENU ONLY])
[HDMI OUT]
[SIGNAL SEL]
Sets the signal to output from the <HDMI> terminal.
The items that can be set are as follows.
[SDI OUT1(2160p)], [SDI OUT2]
(Factory setting: [SDI OUT2])
[HDMI TC OUT]
Sets if the time code information is output or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be controlled or not. This can be set when [HDMI TC OUT] in [HDMI OUT] is enabled.
[ON]
Controls the recording operation of the external equipment.
[OFF]
Does not control the recording operation of the external equipment.
(Factory setting: [OFF])
[SD DOWNCON MODE]
Sets the mode of the SD down converter output signal from the <SDI OUT2>/<HDMI OUT> terminal.
[SIDE CROP]
Outputs an equal top and bottom width.
[LETTER BOX]
Outputs an equal right and left width.
[SQUEEZE]
Outputs by compressing in the horizontal direction to fit the screen.
(Factory setting: [LETTER BOX])
[VF COLOR]
Selects whether to display viewfinder images in color or in black and white.
[ON]
Displays in color.
[OFF]
Displays in black and white. The playback image, thumbnail screen, and menu display will be kept in color.
(Factory setting: [ON])
[LCD]
[BRIGHTNESS]
Adjusts the brightness of the LCD monitor.
The items that can be set are as follows.
[−15]…[15]
(Factory setting: [0])
[COLOR LEVEL]
Adjusts the color level of the LCD monitor.
The items that can be set are as follows.
[−15]…[15]
(Factory setting: [0])
[CONTRAST]
Adjusts the contrast of the LCD monitor.
The items that can be set are as follows.
[−30]…[30]
(Factory setting: [0])
[BACK LIGHT]
Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.
The items that can be set are as follows.
[−1], [0], [1], [2]
(Factory setting: [0])
[SELF SHOOT]
Sets the display of the LCD monitor when mirror shooting is performed.
[NORMAL]
Does not invert the left and right sides.
[MIRROR]
Inverts the left and right sides.
(Factory setting: [MIRROR])
[LCD/VF HDR]
Sets the output image from the LCD monitor and viewfinder.
[SDR]
Outputs in the standard dynamic range.
[HDR]
Outputs in the high dynamic range.
(Factory setting: [HDR])
[LCD/VF V-Log]
Sets the output signal from the LCD monitor and viewfinder when the [SYSTEM] menu → [COLOR SETTING] → [V-Log] is set.
[V-Log]
Outputs in same color as the recording image.
[V-709]
Outputs after converting to an image suitable for preview.
(Factory setting: [V-Log])
[INDICATOR]
Selects the indicator to display in the output image.
[INDICATOR SW]
Selects the status display method.
[ON]
Status is displayed constantly.
[OFF]
Normally, status is not displayed. This is displayed when the mode check screen is displayed by pressing the <MARKER SEL>/<MODE CHECK> switch toward the <MCK> side.
(Factory setting: [ON])
[TC]
Displays/hides the time code, user bits, and counter.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[TC ON COLOR BAR]
Selects whether to display the time code, user bits, and counter when color bar is output.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[REC STATUS]
Sets whether to display [REC] during recording.
[ON]
[REC] is displayed.
[OFF]
[REC] is not displayed.
However, [REC] is displayed when set to the [OTHERS] menu → [LED] → [REC TALLY] → [CHAR].
(Factory setting: [OFF])
[REC MEDIA]
Displays/hides the setting status of the memory card format to record.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[SLOT STATUS]
Displays/hides the status of the card slot and remaining memory card capacity.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Displays/hides the setting in the [RECORDING] menu → [2 SLOTS FUNC.].
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[STREAMING]
Displays/hides the streaming status.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[NETWORK]
Displays/hides the connection status of the wired LAN, wireless LAN, and USB tethering.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[BATTERY REMAIN]
Displays/hides the remaining battery level.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Displays/hides the recording format settings.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[CLIP NAME]
Displays/hides the clip file name to be recorded. Up to eight characters from the beginning of the file name are displayed.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[BONDING DEVICE]
Displays/hides the status of the device acquired from the bonding device.
This is not displayed when the device status cannot be acquired from the bonding device even if [ON] is selected.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[REC REMOTE]
Displays/hides the remote control status of the external equipment connected to the <SDI OUT1>/<SDI OUT2>/<HDMI> terminals.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[REC MODE]
Displays/hides the status of the interval recording.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[FBC]
Displays/hides the operation status of the flash band compensation function.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[HDR/DRS/V-Log]
Displays/hides the operation status of the high dynamic range recording function, dynamic range stretcher function, or V-Log recording function.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[CAC]
Displays/hides the operation status of the chromatic aberration compensation function.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[GAMMA MODE]
Displays/hides the gamma mode.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[SCENE FILE]
Displays/hides scene file name.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[AUDIO LEVEL METER]
Displays/hides the audio level meter.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[GAIN]
Displays/hides the gain value and the digital super gain value.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[SHUTTER]
Displays/hides the shutter speed.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[IRIS]
Displays/hides the F value, operation status of the super iris, and the operation status of the super black.
[IRIS]
Displays only the F value.
[S+IRIS]
Displays all.
[S]
Displays only the operation status of the super iris and operation status of the super black.
[OFF]
Does not display.
(Factory setting: [S+IRIS])
[ZOOM/FOCUS]
Switches the unit of zoom and focus values.
[NUMBER]
Displays the zoom and focus in the position value between [000]/[00] and [999]/[99].
[mm/feet]
Displays the zoom in units of millimeters and the focus in units of feet.
[mm/m]
Displays the zoom in units of millimeters and the focus in units of meters.
[OFF]
Does not display either the zoom or focus.
(Factory setting: [NUMBER])
[FILTER]
Displays/hides the positions of the ND filter and the CC filter.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[WHITE BALANCE]
Displays/hides the color temperature.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[DATE/TIME]
Displays/hides the date and time.
Display order of the year, month, and date follows the setting in the [OTHERS] menu → [CLOCK] → [DATE FORMAT].
[OFF]
Does not display the date and time.
[DATE]
Displays only the date.
[TIME]
Displays only the time.
[DATE&TIME]
Displays the date and time.
(Factory setting: [OFF])
[SHOOTING MODE]
Displays/hides high-sensitivity mode.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[EXTENDER]
Displays/hides the display whether lens extender function is active.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[D.ZOOM]
Displays/hides the digital zoom ratio.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[PLAYBACK STATUS]
Displays/hides the playback status.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[SD CARD WARNING]
Toggles whether to display the warning when an SD card is inserted while [FILE FORMAT] is set to [P2].
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[MODE CHECK INDICATOR]
[STATUS]
Sets whether to display the STATUS screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[!LED]
Sets whether to display the !LED screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The cause for the viewfinder lamp is illuminated is displayed by [!] with black and white inverted.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[FUNCTION]
Sets whether to display the FUNCTION screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[AUDIO]
Sets whether to display the AUDIO screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[CAC]
Sets whether to display the CAC screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[USER SW STATUS]
Selects whether to display the SWITCH screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[NETWORK]
Selects whether to display the NETWORK screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[SDI OUT1 MARKER]
[CENTER MARKER]
Switch the type of the center marker.
[1]
+ (large)
[2]
Open center (large)
[3]
+ (small)
[4]
Open center (small)
[OFF]
Does not display.
(Factory setting: [1])
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1]
Box
[2]
Corners
[OFF]
Does not display.
(Factory setting: [2])
[SAFETY AREA]
Sets the size of the safety zone marker.
It can be set in 1% steps with the ratio of length to width constant.
The items that can be set are as follows.
[80%]…[100%]
(Factory setting: [90%])
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
Sets the focus assist method when the USER button assigned with [FOCUS ASSIST] is operated.
[EXPAND]
Sets the enlarged display.
[PEAKING]
Sets the peaking display.
[SQUARES]
Sets the focus square display.
[EXPAND+PEAKING]
Displays in the combination of [EXPAND] and [PEAKING].
[EXPAND+SQUARES]
Displays in the combination of [EXPAND] and [SQUARES].
(Factory setting: [EXPAND])
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC]
Disables the enlarged display function after ten seconds have elapsed.
[HOLD]
Enables the enlarged display function until the <FOCUS ASSIST> button or the USER button assigned with [EXPAND] is pressed.
[UNTIL REC]
Enables the enlarged display function until recording starts.
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
[×2], [×3], [×4]
(Factory setting: [×2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
[LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
[RED], [GREEN], [WHITE]
(Factory setting: [RED])
[BLACK & WHITE]
Enables/disables the monochrome display.
[ON]
Enables the monochrome display.
[OFF]
Disables the monochrome display.
[DURING PEAKING]
Enables the monochrome display while the peaking display is enabled.
(Factory setting: [OFF])
[DETAIL]
Sets the intensity of the contour for the video to make it easier to focus.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[DETAIL LEVEL]
Sets the intensity of the contours.
The items that can be set are as follows.
[−3]…[3]
(Factory setting: [0])
[DETAIL FREQ.]
Adjusts the frequency of the contour highlights.
The items that can be set are as follows.
[HIGH], [LOW]
(Factory setting: [LOW])
[EI ASSIST]
[ZEBRA1 DETECT]
Sets the detection level of zebra pattern 1.
The items that can be set are as follows.
[0%]…[109%]
(Factory setting: [80%])
[ZEBRA2 DETECT]
Sets the detection level of zebra pattern 2.
The items that can be set are as follows.
[0%]…[109%]
(Factory setting: [100%])
[ZEBRA2]
Enables/disables zebra pattern 2 and selects [SPOT].
The items that can be set are as follows.
[ON], [SPOT], [OFF]
(Factory setting: [OFF])
[LOW LIGHT LEVEL]
Sets the amount of the light entering the camera to be the reference to display [LOW LIGHT].
The items that can be set are as follows.
[OFF], [10%], [15%], [20%], [25%], [30%], [35%]
(Factory setting: [35%])
[WFM MODE]
Sets the display of the waveform monitor. Displaying of the waveform and the vector can be switched.
[WAVE]
Displays the waveform.
[VECTOR]
Displays the vector.
[WAVE/VECTOR]
Displays the waveform and the vector.
The display switches in the order of waveform, vector, and no display every time the USER button assigned with [WFM] is pressed.
(Factory setting: [WAVE])
[WFM TRANSPARENCE]
Sets the transmittance of the waveform monitor.
The items that can be set are as follows.
[0%], [25%], [50%]
(Factory setting: [25%])
[Y GET UNIT]
Sets the unit of the brightness of Y GET.
The items that can be set are as follows.
[%], [STOP]
(Factory setting: [%])
[!LED]
[GAIN(0dB)]
Sets whether to illuminate the [!] lamp on the viewfinder when the gain is anything other than 0 dB.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[DS.GAIN]
Sets whether to illuminate the [!] lamp on the viewfinder when [DS.GAIN] (incremental gain) is working.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[SHUTTER]
Sets whether to illuminate the [!] lamp on the viewfinder when the electronic shutter is working.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[WHITE PRESET]
Sets whether to illuminate the [!] lamp on the viewfinder when the <WHITE BAL> switch is set to <PRST>.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[EXTENDER]
Sets whether to illuminate the [!] lamp on the viewfinder when the lens extender is working.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [ON])
[B.GAMMA]
Sets whether to illuminate the [!] lamp on the viewfinder when the black gamma is working.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[MATRIX]
Sets whether to illuminate the [!] lamp on the viewfinder when the color correction table for linear matrix is selected.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[COLOR CORRECTION]
Sets whether to illuminate the [!] lamp on the viewfinder when the <GAIN> switch matches the setting in the [SCENE FILE] menu → [COLOR CORRECTION], and the 16-axis independent color correction is set.
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[FILTER]
Sets whether to illuminate the [!] lamp on the viewfinder for any setting combination other than the <CC FILTER> dial set to<A> (<3200 K>) and the <ND FILTER> dial set to <1> (<CLEAR>).
The items that can be set are as follows.
[ON], [OFF]
(Factory setting: [OFF])
[ATW]
Sets whether to illuminate the [!] lamp on the viewfinder when the automatic tracking white balance function is working.