Installing software
Download and expand the P2 Network Setting software for Windows from the following website.
- Top
- Network Connection
- Streaming function
- Entering the setting using the setting tool
Entering the setting using the setting tool
Creating the SD card for setting using the P2 Network Setting software
The SD card created with this software can be used to load into the camera menu or as the reference destination when the [NETWORK] menu → [STREAMING] → [CONNECTION INFO.] → [SD CARD] is selected.
RTMP(S) setting procedure
Start the P2 Network Setting software. (Fig. 1)
Select the [Streaming] tab → [RTMP] tab.
Enter the destination URL in [STREAM DESTINATION URL].
Click [Export] and select the destination in the drive selection dialog, and then click [OK]. (Fig. 2)
This cannot be saved to anything other than a removable drive.
SRT CLIENT setting procedure
Start the P2 Network Setting software. (Fig. 1)
Select the [Streaming] tab → [SRT] tab.
Enter the destination URL in [STREAM DEST. URL].
Enter the stream ID in [STREAM ID].
To encrypt, select Encryption and enter the PASS PHRASE.
Click [Export] and select the destination in the drive selection dialog, and then click [OK]. (Fig. 2)
This cannot be saved to anything other than a removable drive.