Recording takes place once for the set amount of time.
Set [MENU] → [REC SETTINGS] → [REC FUNCTION] → [REC MODE] to [ONE SHOT].
When [SUB CODEC] is set to [AVC-LongG50] or [AVC-LongG25], or when the proxy data recording is selected, one-shot recording is not available.
When [VFR] is set, one-shot recording is not available.
Set the following related items from [MENU] → [REC SETTINGS] → [REC FUNCTION].
[REC TIME]: Duration of each recording
[START DELAY]: Delay time from the time when the <REC> button is pressed until the time the first recording starts
Press the <REC> button.
Recording is performed for the time set in step 2, and then pauses.
To stop recording, perform one of the following operations.
Press and hold the <REC> button for at least two seconds. After recording operation is performed once, recording stops.
Press and hold the <HOME> button for at least two seconds.
To clear settings, set [MENU] → [REC SETTINGS] → [REC FUNCTION] → [REC MODE] to [NORMAL].
The followings are displayed on the top right in the display window and the right side in the viewfinder or LCD monitor.
During recording: [i REC] lights up in red
During pause: [i REC] is inverted in red and white
During stop: [i] in black character