Status display

Refer to “Status display (STATUS) in the <MON OUT1>, <MON OUT2>, and <VF SDI> outputs.”.

Adjusting the screen

Press the <EVF MENU> button.

Screen adjustment items are displayed on the upper part of the screen.

Turn the jog dial button to select the items you want to adjust.

Press the jog dial button.

Turn the jog dial button to make adjustments.

Press the jog dial button.

Press the <EVF MENU> button.

The screen adjustment items display disappears.

This can also be done in [EVF MENU] → [DISPLAY SETUP].

Direct camera settings

The following camera settings can be set directly through viewfinder operation.

[FPS]/[SHUTTER]/[EI]/[WB]

Press the <CAM MENU> button of the viewfinder.

Setting items are displayed on the lower part of the screen.

Turn the jog dial button to select the items you want to set.

Press the jog dial button.

Turn the jog dial button to select setting details.

Press the <CAM MENU> button.

[MENU] settings from the viewfinder

The camera’s [MENU] can be directly configured through viewfinder operation.

Press and hold the <CAM MENU> button of the viewfinder for at least two seconds.

The camera [MENU] is displayed.

[MENU] is also displayed on the camera’s operation panel.

[EVF MENU] operation

Press and hold the <EVF MENU> button for at least two seconds.

[EVF MENU] is displayed.

[EVF MENU] list

False color mode

Check the exposure using the false color.

Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white.

The false color can be displayed in the viewfinder and the output image from the <VF SDI> terminal.

Display patterns