Assembling the camera module and the camera extension module

co_body_connect_CAM_ext_module

Align the upper lock angle at the front of the camera extension module with the upper lock plate at the rear of the camera module.(Fig. 1)

Firmly push in the camera extension module and connect the connection terminals of the camera module and camera extension module. (Fig. 2)

Disassembling

co_body_release_CAM_extention

Push down the recording module release lever (Fig. 2) while pulling up the lock knob (red) of the recording module release lever (Fig. 1).

The rear part of the camera extension module will come up.

It will be difficult for the rear part to come up when heavy items such as batteries are mounted.

Lift the camera extension module.

Remove the upper lock angle in front of the camera extension module from the upper lock plate at the rear of the camera module.