Attaching the V-RAW recorder

V-RAW recorder is attached to the battery holder and the external unit connection terminal of the recording module.


Loosen the screw on the external unit connection terminal at the rear of the recording module and remove the cover. (Fig. 1)

Attach the V-RAW recorder. (Fig. 2)

Slide the V-RAW recorder downward. (Fig. 3)

Fold down the release lever of the V-RAW recorder. (Fig. 4)



Slide the stopper on the release lever on the V-RAW recorder, and pull up the release lever. (Fig. 1, Fig. 2)

The V-RAW recorder will lift.

Remove the V-RAW recorder. (Fig. 3)