[AUDIO SETTINGS]

Various setting items for audio recording.

Item

Description of settings

[AUDIO RECORD]

Sets whether to record the audio.

The audio data itself is not recorded when set to [OFF]. (Audio data will not appear in the timeline of editing software)

[ON], [OFF]

  • Factory setting: [ON]

[AUDIO INPUT]

[AES/EBU IN]

If this is set to [ON], the digital audio (AES/EBU standard-compliant) input from the <AUDIO IN 1> terminal and <AUDIO IN 2> terminal is recorded in 4 channels.

In this case, analog input selection and volume adjustment is not possible.

[ON], [OFF]

  • Factory setting: [OFF]

[FRONT MIC POWER]

Enables/disables the front microphone phantom power.

[ON], [OFF]

  • Factory setting: [ON]

[FRONT MIC LEVEL]

Sets the front microphone input level.

[−40dB], [−50dB]

  • Factory setting: [−40dB]

[REAR1 MIC POWER]

Enables/disables the phantom power of the rear microphone connected to the <AUDIO IN 1> terminal.

[ON], [OFF]

  • Factory setting: [OFF]

[REAR2 MIC POWER]

Enables/disables the phantom power of the rear microphone connected to the <AUDIO IN 2> terminal.

[ON], [OFF]

  • Factory setting: [OFF]

[REAR MIC LEVEL]

Sets the input level of the rear microphone connected to the <AUDIO IN 1> and <AUDIO IN 2> terminals.

[−40dB], [−50dB], [−60dB]

  • Factory setting: [−60dB]

[REAR LINE LEVEL]

Sets the line input level from the <AUDIO IN 1> terminal and <AUDIO IN 2> terminal.

[4dB], [0dB], [−3dB]

  • Factory setting: [4dB]

[FRONT1 MIC LOWCUT]

Enables/disables the low-cut filter of front microphone 1.

[ON], [OFF]

  • Factory setting: [OFF]

[FRONT2 MIC LOWCUT]

Enables/disables the low-cut filter of front microphone 2.

[ON], [OFF]

  • Factory setting: [OFF]

[REAR1 MIC LOWCUT]

Enables/disables the low-cut filter of rear microphone 1.

[ON], [OFF]

  • Factory setting: [OFF]

[REAR2 MIC LOWCUT]

Enables/disables the low-cut filter of rear microphone 2.

[ON], [OFF]

  • Factory setting: [OFF]

[CH IN SEL]

Sets the input of audio channels 1 to 4.

[1・2FRONT 3・4REAR], [1・2REAR 3・4FRONT]

  • Factory setting: [1・2FRONT 3・4REAR]

[TEST TONE]

Sets whether to output a test signal when the video is made to a color bar.

[ON]: Outputs a test tone.

[OFF]: Does not output a test tone.

  • Factory setting: [ON]

[AUDIO LEVEL]

[FRONT1 LEVEL]

Sets the level adjustment method of the front microphone 1 to manual or automatic.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[FRONT2 LEVEL]

Sets the level adjustment method of the front microphone 2 to manual or automatic.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[REAR1 LEVEL]

Sets the level adjustment method of the rear microphone 1 to manual or automatic.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[REAR2 LEVEL]

Sets the level adjustment method of the rear microphone 2 to manual or automatic.

[AUTO]: Adjust automatically.

[MANUAL]: Enables manual adjustment.

  • Factory setting: [AUTO]

[FRONT1 VOL]

Performs adjustments in this item when the level adjustment method of the front microphone 1 is set to [MANUAL].

[0] - [100]

  • Factory setting: [70]

[FRONT2 VOL]

Performs adjustments in this item when the level adjustment method of the front microphone 2 is set to [MANUAL].

[0] - [100]

  • Factory setting: [70]

[REAR1 VOL]

Performs adjustments in this item when the level adjustment method of the rear microphone 1 is set to [MANUAL].

[0] - [100]

  • Factory setting: [70]

[REAR2 VOL]

Performs adjustments in this item when the level adjustment method of the rear microphone 2 is set to [MANUAL].

[0] - [100]

  • Factory setting: [70]

[FRONT1 LIMITER]

Enables/disables the limiter of front microphone 1.

[ON], [OFF]

  • Factory setting: [OFF]

[FRONT2 LIMITER]

Enables/disables the limiter of front microphone 2.

[ON], [OFF]

  • Factory setting: [OFF]

[REAR1 LIMITER]

Enables/disables the limiter of rear microphone 1.

[ON], [OFF]

  • Factory setting: [OFF]

[REAR2 LIMITER]

Enables/disables the limiter of rear microphone 2.

[ON], [OFF]

  • Factory setting: [OFF]

[HEADROOM]

Sets the headroom (standard level).

[18dB], [20dB]

  • Factory setting: [20dB]

[AUDIO OUTPUT]

[MONITOR SEL1]

Sets the audio channel to be output from the <PHONES> terminal.

[CH1/2]: Outputs audio channel 1/2.

[CH3/4]: Outputs audio channel 3/4.

  • Factory setting: [CH1/2]

[MONITOR SEL2]

Sets the audio format (mono, stereo, mix) to be output from the <PHONES> terminal.

When [MONITOR SEL1] is set to [CH1/2]:

[MONO CH1], [MONO CH2], [STEREO CH1/2], [MIX CH1/2]

When [MONITOR SEL1] is set to [CH3/4]:

[MONO CH3], [MONO CH4], [STEREO CH3/4], [MIX CH3/4]

  • Factory setting: [STEREO CH1/2] or [STEREO CH3/4]

[MONITOR DELAY]

Sets whether to delay the audio from the <PHONES> terminal to match the monitor output.

[ON], [OFF]

  • Factory setting: [OFF]

[MONITOR VOL]

Adjusts the level of audio to be output from the <PHONES> terminal.

[0] - [100]

  • Factory setting: [70]

[ALARM]

Sets the volume of the warning sound to be output from the <PHONES> terminal.

[LOUD], [MEDIUM], [SMALL], [OFF]

  • Factory setting: [MEDIUM]