How to input user bits

By setting user bits, information such as memos (date, time) up to eight digits long (hexadecimal) can be recorded.

Press the <TC> button to display the TC screen.

From the user bits display, select [User] in [UB MODE].

Select [SET].

The [TC SET] screen is displayed.

Set the user bits using the jog dial button.

Press the jog dial button to confirm the user bits setting value.

Retention of user bits in memory

User bit settings are automatically recorded and are retained even if the power is turned off.

Frame rate information

The relationship between frame rates, image pull-down, and time codes/user bits is as follows.

co_other_framerate_info