Sets the input/output function of audio.
[INPUT SETTINGS]
[FRONT MIC POWER]
Sets the phantom power supply of the front microphone.
The items that can be set are as follows.
(Factory setting: [ON])
[REAR MIC POWER]
Sets the phantom power supply of the rear microphone.
When [OFF] is selected, the phantom power supply is not output even if the microphone input power selector switch is set to <+48V>.
The items that can be set are as follows.
(Factory setting: [ON])
[FRONT MIC LEVEL]
Sets the input level of the external microphone connected to the front <MIC IN> terminal of the camera.
This is enabled only when an external microphone is connected to the <MIC IN> terminal.
The items that can be set are as follows.
(Factory setting: [−40dB])
[REAR MIC CH1/3 LEVEL]
Sets the audio input level of the external microphone connected to the rear <AUDIO IN CH1/3> terminal of the camera.
This is enabled only when the <LINE>/<MIC> selector switch is set to <MIC>.
The items that can be set are as follows.
(Factory setting: [−60dB])
[REAR MIC CH2/4 LEVEL]
Sets the audio input level of the external microphone connected to the rear <AUDIO IN CH2/4> terminal of the camera.
This is enabled only when the <LINE>/<MIC> selector switch is set to <MIC>.
The items that can be set are as follows.
(Factory setting: [−60dB])
[REAR LINE IN LEVEL]
Sets the audio input level of the device connected to the rear <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal of the camera.
This is enabled only when the <LINE>/<MIC> selector switch is set to <LINE>.
The items that can be set are as follows.
(Factory setting: [4dB] (when [AREA SETTINGS] is [AREA 1]/[AREA 2]/[AREA 4]), [0dB] (when [AREA SETTINGS] is [AREA 3]))
[WIRELESS WARN]
Selects whether to display a warning when the reception status of the wireless microphone receiver is poor.
The items that can be set are as follows.
(Factory setting: [OFF])
[WIRELESS TYPE]
Selects the type of wireless microphone receiver.
[SINGLE] |
Selects a single channel type wireless microphone receiver. |
[DUAL] |
Selects a double channel type wireless microphone receiver. |
(Factory setting: [SINGLE])
[REC CH SETTINGS]
[VOL. SELECT]
Selects which audio channel to assign to the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial and the <F.AUDIO LEVEL> dial.
[CH1/2] |
Assigns level adjustment of the audio channels 1 and 2. Audio channels 3 and 4 can be automatically adjusted or adjusted by [CH3 LEVEL CONTROL] or [CH4 LEVEL CONTROL]. |
[CH3/4] |
Assigns level adjustment of the audio channels 3 and 4. Audio channels 1 and 2 can be automatically adjusted or adjusted by [CH1 LEVEL CONTROL] or [CH2 LEVEL CONTROL]. |
(Factory setting: [CH1/2])
[FRONT VOL. CH1]
Selects if the <F.AUDIO LEVEL> dial is enabled against the audio signal input to the audio channel 1.
[FRONT] |
This is enabled when the <AUDIO IN CH1> switch is set to <FRONT>. |
[W.L.] |
This is enabled when the <AUDIO IN CH1> switch is set to <W.L.>. |
[REAR] |
This is enabled when the <AUDIO IN CH1> switch is set to <REAR>. |
[ALL] |
The <F.AUDIO LEVEL> dial is enabled regardless of the setting of the <AUDIO IN CH1> switch. |
[OFF] |
The <F.AUDIO LEVEL> dial is disabled regardless of the setting of the <AUDIO IN CH1> switch. |
(Factory setting: [OFF])
[FRONT VOL. CH2]
Selects if the <F.AUDIO LEVEL> dial is enabled against the audio signal input to the audio channel 2.
[FRONT] |
This is enabled when the <AUDIO IN CH2> switch is set to <FRONT>. |
[W.L.] |
This is enabled when the <AUDIO IN CH2> switch is set to <W.L.>. |
[REAR] |
This is enabled when the <AUDIO IN CH2> switch is set to <REAR>. |
[ALL] |
The <F.AUDIO LEVEL> dial is enabled regardless of the setting of the <AUDIO IN CH2> switch. |
[OFF] |
The <F.AUDIO LEVEL> dial is disabled regardless of the setting of the <AUDIO IN CH2> switch. |
(Factory setting: [OFF])
[FRONT VOL. CH3]
Selects if the <F.AUDIO LEVEL> dial is enabled against the audio signal input to the audio channel 3.
[FRONT] |
This is enabled when the <AUDIO IN CH3> switch is set to <FRONT>. |
[W.L.] |
This is enabled when the <AUDIO IN CH3> switch is set to <W.L.>. |
[REAR] |
This is enabled when the <AUDIO IN CH3> switch is set to <REAR>. |
[ALL] |
The <F.AUDIO LEVEL> dial is enabled regardless of the setting of the <AUDIO IN CH3> switch. |
[OFF] |
The <F.AUDIO LEVEL> dial is disabled regardless of the setting of the <AUDIO IN CH3> switch. |
(Factory setting: [OFF])
[FRONT VOL. CH4]
Selects if the <F.AUDIO LEVEL> dial is enabled against the audio signal input to the audio channel 4.
[FRONT] |
This is enabled when the <AUDIO IN CH4> switch is set to <FRONT>. |
[W.L.] |
This is enabled when the <AUDIO IN CH4> switch is set to <W.L.>. |
[REAR] |
This is enabled when the <AUDIO IN CH4> switch is set to <REAR>. |
[ALL] |
The <F.AUDIO LEVEL> dial is enabled regardless of the setting of the <AUDIO IN CH4> switch. |
[OFF] |
The <F.AUDIO LEVEL> dial is disabled regardless of the setting of the <AUDIO IN CH4> switch. |
(Factory setting: [OFF])
[CH1 LEVEL]
Select auto/manual for the method to adjust the recording level of the audio channel 1.
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH2 LEVEL]
Select auto/manual for the method to adjust the recording level of the audio channel 2.
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH3 LEVEL]
Select auto/manual for the method to adjust the recording level of the audio channel 3.
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH4 LEVEL]
Select auto/manual for the method to adjust the recording level of the audio channel 4.
The items that can be set are as follows.
(Factory setting: [AUTO])
[CH1 LEVEL CONTROL]
The recording level can be manually adjusted when [CH1 LEVEL] which adjusts the recording level of the audio channel 1 is set to [MANUAL].
The items that can be set are as follows.
(Factory setting: [70])
[CH2 LEVEL CONTROL]
The recording level can be manually adjusted when [CH2 LEVEL] which adjusts the recording level of the audio channel 2 is set to [MANUAL].
The items that can be set are as follows.
(Factory setting: [70])
[CH3 LEVEL CONTROL]
The recording level can be manually adjusted when [CH3 LEVEL] which adjusts the recording level of the audio channel 3 is set to [MANUAL].
The items that can be set are as follows.
(Factory setting: [70])
[CH4 LEVEL CONTROL]
The recording level can be manually adjusted when [CH4 LEVEL] which adjusts the recording level of the audio channel 4 is set to [MANUAL].
The items that can be set are as follows.
(Factory setting: [70])
[CH1 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 1.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 2.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH3 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 3.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH4 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 4.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH1 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 1 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH2 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 2 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH3 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 3 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[CH4 LIMITER]
Enables/disables the limiter when the method to adjust the recording level for audio channel 4 is manual.
The items that can be set are as follows.
(Factory setting: [OFF])
[HEAD ROOM]
Sets the headroom (standard level).
The items that can be set are as follows.
(Factory setting: [20dB] (when [AREA SETTINGS] is set to [AREA 1]/[AREA 2]), [18dB] (when [AREA SETTINGS] is set to [AREA 3]/[AREA 4]))
[OUTPUT SETTINGS]
[MONITOR SELECT]
Selects the signal format to output to the monitor when the <MONITOR SELECT> switch is set to <ST> (stereo).
The items that can be set are as follows.
(Factory setting: [STEREO])
[AUDIO OUT LEVEL]
Selects the audio output level.
The items that can be set are as follows.
(Factory setting: [4dB] (when [AREA SETTINGS] is [AREA 1]/[AREA 2]/[AREA 4]), [0dB] (when [AREA SETTINGS] is [AREA 3]))
[HDMI OUT CH]
Selects the audio channel to be output from the <HDMI> terminal.
[CH1/2] |
Outputs the audio signals of the audio channel 1 and the audio channel 2 as stereo. |
[CH3/4] |
Outputs the audio signals of the audio channel 3 and the audio channel 4 as stereo. |
(Factory setting: [CH1/2])
[ALARM]
[BATTERY NEAR END]
Sets whether to sound the alarm when the remaining battery level is near end.
The items that can be set are as follows.
(Factory setting: [OFF])
[BATTERY NEAR END CANCEL]
When set to [ON], the output alarm sound or warning displayed for the battery near end can be cancelled by pressing the <MARKER SEL>/<MODE CHECK> switch to the <MCK> side.
The items that can be set are as follows.
(Factory setting: [ON])
[BATTERY END]
Sets whether to sound the alarm when the remaining battery level is exhausted.
The items that can be set are as follows.
(Factory setting: [OFF])
[MEDIA NEAR END]
Sets whether to sound the alarm when the remaining memory card capacity is near end.
The items that can be set are as follows.
(Factory setting: [OFF])
[MEDIA END]
Sets whether to sound the alarm when the remaining memory card capacity is exhausted.
The items that can be set are as follows.
(Factory setting: [OFF])
[WARNING]
Sets whether to sound the alarm when a system error or warning occurs.
The items that can be set are as follows.
(Factory setting: [OFF])