Setup file

Specified menu can be saved or loaded to/from the camera memory or a SD card.

Saving the setup file

Saves the current setting value of the camera into the camera memory or SD card.

Current setting values of the camera is saved as a new file in a SD card by specifying the file name.

Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE AS].

The file name entry screen and the keyboard are displayed. (Fig. 1)

Enter the text to set with the keyboard.

Select [Enter].

A confirmation screen is displayed.

Select [SET].

The file is saved.

Overwrites the file selected in the list of the setup files saved on the SD card with the current setting values of the camera.

Select [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE].

The list of setup files saved on the SD card is displayed. (Fig. 2)

Select the file to overwrite from the list of setup files.

The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.

Select [Enter].

A confirmation screen is displayed.

Select [SET].

The file is saved.

Saves the current setting value of the camera into the camera memory.

Select [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [SAVE].

Loads a setup file from the camera memory or the SD card.

Loads a setup file saved in the SD card.

Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [LOAD].

A list of setup files stored in the specified folder in the SD card is displayed.

Select the name of the file to load.

Select [SET].

Loading of the file is started. The camera is restarted after loading.

An error message may be displayed. For error message, refer to “Warning system”.
The file saved with different firmware version may not be able to load.

Loads the setup file saved on the camera memory.

Select the [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [LOAD].

Loading of the file is started. The camera is restarted after loading.