Adjustments for shooting

For shooting, use the following steps.

Switch the <CC FILTER>/<ND FILTER> dial setting according to the light conditions.

For details on setting example of the <CC FILTER>/<ND FILTER> dial, refer to “Shooting and recording (Camera unit)”.

Operate the <WHITE BAL> switch.

Press the <AUTO W/B BAL> switch towards the <AWB> side to adjust the white balance. (White balance adjustment)

Press the <AUTO W/B BAL> switch towards the <ABB> side to adjust the black balance. (Black balance adjustment)

Press the <AUTO W/B BAL> switch towards the <AWB> side to re-adjust the white balance.

Point the camera at the subject and adjust the focus and zoom.

When using the electronic shutter, set the shutter mode and shutter speed. (Setting the electronic shutter)