Setting the shutter mode/shutter speed

Switch the <SHUTTER> switch to set the shutter speed in the shutter mode.

The shutter speed in the synchro scan mode can be changed by the <SYNCHRO SCAN> button on the side.

The shutter speed selection range can be restricted or use of the synchro scan mode can be selected beforehand in each item in the [CAMERA] menu → [SHUTTER SPEED].

Once selected, the shutter speed is saved even after the camera is turned off.

Press the <SHUTTER> switch positioned at <OFF> towards <ON>.

[POSITION1] is enabled.

Press the <SHUTTER> switch from <ON> towards <SEL>, and repeat this operation until the desired shutter mode or shutter speed is displayed on the viewfinder screen.

  • If all shutter modes and shutter speeds are available, the display changes in the following order.

    [POSITION1], [POSITION2], [POSITION3], [POSITION4], [POSITION5], [POSITION6], [SYNCHRO SCAN]