Starting streaming with an operation on the camera

Select the [NETWORK] menu → [STREAMING] → [START TRIGGER] → [CAMERA].

Set the destination.

For details of setting the destination, refer to “Setting the destination for streaming in the menu of the camera” or “Referring to the memory card for the destination of streaming”.

Select the [NETWORK] menu → [STREAMING] → [START] → [ON].

If the camera is connected to the transmission destination through a network, the camera starts the transmission of streaming video.

Setting the destination for streaming in the menu of the camera

Select the [NETWORK] menu → [STREAMING] → [CONNECTION INFO.] → [MEMORY].

Enter the destination URL in the [NETWORK] menu → [STREAMING] → [RECEIVER URL].

  • Enter the destination URL in following format.

    • rtmp://(server URL):(port number)/(path)/(stream key)

    • rtmps://(server URL):(port number)/(path)/(stream key)

Referring to the memory card for the destination of streaming

Insert the memory card with the destination information saved into the card slot selected in the [OTHERS] menu → [FILE] → [SLOT FOR LOAD/SAVE].

Select the [NETWORK] menu → [STREAMING] → [CONNECTION INFO.] → [SD CARD].

Management of destination information

Destination information can be saved and loaded between the menu of the camera and the memory card.

Clearing the destination information

Select the [NETWORK] menu → [STREAMING] → [CLEAR (MEMORY)].

  • The setting information for P2 Cast is also cleared.

  • The destination URL information set in P2 Cast is also cleared. (Using P2 Cast)

  • The setting related to multicast is not cleared.

Stopping streaming of video

Select the [NETWORK] menu → [STREAMING] → [START] → [OFF].