Status of the card access lamp and the memory card

Is illuminated green

Recording possible

Both loading/writing are permitted.

Is illuminated orange

Recording target

Both loading/writing are permitted. Current recording target.

Flashing orange

Accessing card

Loading/writing are currently being performed.

Flashing orange rapidly

Recognizing memory card

The memory card is being recognized.

Error

An error has occurred.

This will flash even if the memory card is not inserted when an error has occurred.

Flashing green slowly

No remaining memory card capacity

Memory card has no remaining capacity.

Only loading is possible.

Write-protected

The write-protected switch on the memory card is set to the Protect side or the LOCK side. Only loading is possible.

Unrecordable memory card

It cannot record with the recording format that is currently set.

Change the recording format or use a memory card compatible with the recording format.

Card slot that is not recording target

A memory card is inserted into the card slot not selected in the [RECORDING] menu → [REC MEDIA].

Only loading is possible.

Off

Illegal format

The memory card is not properly formatted. Reformat the card.

No memory card inserted

A memory card has not been inserted.

Invalid memory card

This is a memory card such as MMC (Multi Media Card) that cannot be used with the camera.

Setting to the [NETWORK] menu → [NETWORK FUNC] → [NDI|HX]

Cannot record and play back. The functions other than recording and playback (loading of the scene file, etc.) can be used.

P2 card formatted with encryption with CPS password

Cannot be used with the camera. When formatted with the camera, it can be used as a P2 card that is not encrypted.

During card reader mode

The card access lamp is turned off unless accessing.