[VIDEO OUT/LCD/VF] menu

Configures the settings for the external output, the information to display in the LCD monitor or viewfinder and the output format.

[SDI OUT1]

[OUTPUT SW]

Enables/disables the output from the <SDI OUT1> terminal.

[ON]	Outputs the video.
[OFF]	Does not output the video.

(Factory setting: [ON])

[OUT FORMAT]

Selects the signal to output from the <SDI OUT1> terminal. The item that can be selected varies depending on the setting of the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC FORMAT].

[3840×2160p]	Outputs in 3840×2160p.
[1920×1080p]	Outputs in 1920×1080p.
[1920×1080i]	Outputs in 1920×1080i.
[1920×1080PsF]	Outputs in 1920×1080PsF.
[1280×720p]	Outputs in 1280×720p.

(Factory setting: [1920×1080i])

[3G-SDI OUT]

Sets the format of the 3G-SDI signal output from the <SDI OUT1> terminal.

Can be set when the 3G-SDI signal is output.

[LEVEL-A]	Selects the LEVEL-A method.
[LEVEL-B]	Selects the LEVEL-B DL method.

(Factory setting: [LEVEL-B])

[SDI REC REMOTE]

Sets if the recording operation against the external equipment connected to the <SDI OUT1> terminal (such as recorder) is to be controlled or not.

[ON]	Controls the recording operation of the external equipment.
[OFF]	Does not control the recording operation of the external equipment.

(Factory setting: [OFF])

[SDI OUT CHAR]

Sets whether to superimpose the character to the output from the <SDI OUT1> terminal.

[ON]	Superimposes.
[OFF]	Does not superimpose.

(Factory setting: [OFF])

[SDI OUT ZEBRA]

Sets whether to superimpose the zebra signal to the output from the <SDI OUT1> terminal.

The setting of the zebra signal is in accordance with the following setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].

[ZEBRA1 DETECT], [ZEBRA2 DETECT], [ZEBRA2]

[ON]	Superimposes.
[OFF]	Does not superimpose.

(Factory setting: [OFF])

[SDI OUT HDR]

Sets the signal to output from the <SDI OUT1> terminal.

[SDR]	Outputs in the standard dynamic range.
[HDR]	Outputs in the high dynamic range.

(Factory setting: [HDR])

[MARKER SW]

Marker is displayed in the output from the <SDI OUT1> terminal.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[SDI OUT2]

[OUTPUT SW]

Enables/disables the output from the <SDI OUT2> terminal.

[ON]	Outputs the video.
[OFF]	Does not output the video.

(Factory setting: [ON])

[OUT FORMAT]

Sets the signal to output from the <SDI OUT2> terminal. The item that can be selected varies depending on the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting.

[1920×1080p]	Outputs in 1920×1080p.
[1920×1080i]	Outputs in 1920×1080i.
[1920×1080PsF]	Outputs in 1920×1080PsF.
[1280×720p]	Outputs in 1280×720p.
[720×480i]	Outputs in 720×480i.
[720×576i]	Outputs in 720×576i.

(Factory setting: [1920×1080i])

[3G-SDI OUT]

Sets the format of the 3G-SDI signal output from the <SDI OUT2> terminal.

Can be set when the 3G-SDI signal is output.

[LEVEL-A]	Selects the LEVEL-A method.
[LEVEL-B]	Selects the LEVEL-B DL method.

(Factory setting: [LEVEL-B])

[SD-SDI EDH]

Sets whether to superimpose EDH when output from the <SDI OUT2> terminal is the SD signal (480i and 576i).

[ON]	Superimposes.
[OFF]	Does not superimpose.

(Factory setting: [ON])

[SDI REC REMOTE]

Sets if the recording operation against the external equipment connected to the <SDI OUT2> terminal (such as recorder) is to be controlled or not.

[ON]	Controls the recording operation of the external equipment.
[OFF]	Does not control the recording operation of the external equipment.

(Factory setting: [OFF])

[SDI OUT ZEBRA]

Sets whether to superimpose the zebra signal to the output from the <SDI OUT2> terminal.

The setting of the zebra signal is in accordance with the following setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].

[ZEBRA1 DETECT], [ZEBRA2 DETECT], [ZEBRA2]

[ON]	Superimposes.
[OFF]	Does not superimpose.

(Factory setting: [OFF])

[SDI OUT HDR]

Sets the signal to output from the <SDI OUT2> terminal.

[SDR]	Outputs in the standard dynamic range.
[HDR]	Outputs in the high dynamic range.

(Factory setting: [HDR])

[MARKER SW]

Marker is displayed in the output from the <SDI OUT2> terminal.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[SDI OUTPUT ITEM]

Sets the character content to superimpose on the output signal of the <SDI OUT1>/<SDI OUT2>/<HDMI> terminals.

[MENU ONLY]	Superimposes only the menu when displaying the menu. Normally, nothing is superimposed.
[TC]	Superimposes the time code. Superimposes only the menu when displaying the menu.
[STATUS]	Displays the same contents as all the characters displayed in the viewfinder and the LCD monitor. Superimposes only the menu when displaying the menu.

(Factory setting: [MENU ONLY])

[HDMI OUT]

[SIGNAL SEL]

Sets the signal to output from the <HDMI> terminal.

The items that can be set are as follows.

[SDI OUT1(2160p)], [SDI OUT2]

(Factory setting: [SDI OUT2])

[HDMI TC OUT]

Sets if the time code information is output or not in the output from the <HDMI> terminal.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[HDMI REC REMOTE]

Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be controlled or not. This can be set when [HDMI TC OUT] in [HDMI OUT] is enabled.

[ON]	Controls the recording operation of the external equipment.
[OFF]	Does not control the recording operation of the external equipment.

(Factory setting: [OFF])

[SD DOWNCON MODE]

Sets the mode of the SD down converter output signal from the <SDI OUT2>/<HDMI OUT> terminal.

[SIDE CROP]	Outputs an equal top and bottom width.
[LETTER BOX]	Outputs an equal right and left width.
[SQUEEZE]	Outputs by compressing in the horizontal direction to fit the screen.

(Factory setting: [LETTER BOX])

[VF COLOR]

Selects whether to display viewfinder images in color or in black and white.

[ON]	Displays in color.
[OFF]	Displays in black and white. The playback image, thumbnail screen, and menu display will be kept in color.

(Factory setting: [ON])

[LCD]

[BRIGHTNESS]

Adjusts the brightness of the LCD monitor.

The items that can be set are as follows.

[−15]…[15]

(Factory setting: [0])

[COLOR LEVEL]

Adjusts the color level of the LCD monitor.

The items that can be set are as follows.

[−15]…[15]

(Factory setting: [0])

[CONTRAST]

Adjusts the contrast of the LCD monitor.

The items that can be set are as follows.

[−30]…[30]

(Factory setting: [0])

[BACK LIGHT]

Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.

The items that can be set are as follows.

[−1], [0], [1], [2]

(Factory setting: [0])

[SELF SHOOT]

Sets the display of the LCD monitor when mirror shooting is performed.

[NORMAL]	Does not invert the left and right sides.
[MIRROR]	Inverts the left and right sides.

(Factory setting: [MIRROR])

[LCD/VF HDR]

Sets the output image from the LCD monitor and viewfinder.

[SDR]	Outputs in the standard dynamic range.
[HDR]	Outputs in the high dynamic range.

(Factory setting: [HDR])

[INDICATOR]

Selects the indicator to display in the output image.

[INDICATOR SW]

Selects the status display method.

[ON]	Status is displayed constantly.
[OFF]	Normally, status is not displayed. This is displayed when the mode check screen is displayed by pressing the <MARKER SEL>/<MODE CHECK> switch toward the <MCK> side.

(Factory setting: [ON])

[TC]

Displays/hides the time code, user bits, and counter.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[TC ON COLOR BAR]

Selects whether to display the time code, user bits, and counter when color bar is output.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[REC STATUS]

Sets whether to display [REC] during recording.

[ON]

[REC] is displayed.

[OFF]

[REC] is not displayed.

However, [REC] is displayed when set to the [OTHERS] menu → [LED] → [REC TALLY] → [CHAR].

(Factory setting: [OFF])

[REC MEDIA]

Displays/hides the setting status of the memory card format to record.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[SLOT STATUS]

Displays/hides the status of the card slot and remaining memory card capacity.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[2 SLOTS FUNC.]

Displays/hides the setting in the [RECORDING] menu → [2 SLOTS FUNC.].

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[STREAMING]

Displays/hides the streaming status.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[NETWORK]

Displays/hides the wireless LAN and wired LAN connection status.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[BATTERY REMAIN]

Displays/hides the remaining battery level.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[REC FORMAT]

Displays/hides the recording format settings.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[CLIP NAME]

Displays/hides the clip file name to be recorded. Up to eight characters from the beginning of the file name are displayed.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[BONDING DEVICE]

Displays/hides the status of the device acquired from the bonding device.

This is not displayed when the device status cannot be acquired from the bonding device even if [ON] is selected.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[REC REMOTE]

Displays/hides the remote control status of the external equipment connected to the <SDI OUT1>/<SDI OUT2>/<HDMI> terminals.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[REC MODE]

Displays/hides the status of the interval recording.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[FBC]

Displays/hides the operation status of the flash band compensation function.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[HDR/DRS]

Displays/hides the operation status of the high dynamic range recording function or the dynamic range stretcher function.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[CAC]

Displays/hides the operation status of the chromatic aberration compensation function.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[GAMMA MODE]

Displays/hides the gamma mode.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[SCENE FILE]

Displays/hides scene file name.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[AUDIO LEVEL METER]

Displays/hides the audio level meter.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[GAIN]

Displays/hides the gain value and the digital super gain value.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[SHUTTER]

Displays/hides the shutter speed.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[IRIS]

Displays/hides the F value, operation status of the super iris, and the operation status of the super black.

[IRIS]	Displays only the F value.
[S+IRIS]	Displays all.
[S]	Displays only the operation status of the super iris and operation status of the super black.
[OFF]	Does not display.

(Factory setting: [S+IRIS])

[ZOOM/FOCUS]

Switches the unit of zoom and focus values.

[NUMBER]	Displays the zoom and focus in the position value between [000]/[00] and [999]/[99].
[mm/feet]	Displays the zoom in units of millimeters and the focus in units of feet.
[mm/m]	Displays the zoom in units of millimeters and the focus in units of meters.
[OFF]	Does not display either the zoom or focus.

(Factory setting: [NUMBER])

[FILTER]

Displays/hides the positions of the ND filter and the CC filter.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[WHITE BALANCE]

Displays/hides the color temperature.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[DATE/TIME]

Displays/hides the date and time.

Display order of the year, month, and date follows the setting in the [OTHERS] menu → [CLOCK] → [DATE FORMAT].

[OFF]	Does not display the date and time.
[DATE]	Displays only the date.
[TIME]	Displays only the time.
[DATE&TIME]	Displays the date and time.

(Factory setting: [OFF])

[SHOOTING MODE]

Displays/hides high-sensitivity mode.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[EXTENDER]

Displays/hides the display whether lens extender function is active.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[D.ZOOM]

Displays/hides the digital zoom ratio.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[PLAYBACK STATUS]

Displays/hides the playback status.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[MODE CHECK INDICATOR]

[STATUS]

Sets whether to display the STATUS screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[!LED]

Sets whether to display the !LED screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The cause for the viewfinder lamp is illuminated is displayed by [!] with black and white inverted.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[FUNCTION]

Sets whether to display the FUNCTION screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[AUDIO]

Sets whether to display the AUDIO screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[CAC]

Sets whether to display the CAC screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[USER SW STATUS]

Selects whether to display the SWITCH screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[NETWORK]

Selects whether to display the NETWORK screen when the <MARKER SEL>/<MODE CHECK> switch is pushed to the <MCK> side.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[SDI OUT1 MARKER]

[CENTER MARKER]

Switch the type of the center marker.

[1]	+ (large)
[2]	Open center (large)
[3]	+ (small)
[4]	Open center (small)
[OFF]	Does not display.

(Factory setting: [1])

[SAFETY MARKER]

Selects the type of frame for the safety zone marker.

[1]	Box
[2]	Corners
[OFF]	Does not display.

(Factory setting: [2])

[SAFETY AREA]

Sets the size of the safety zone marker.

It can be set in 1% steps with the ratio of length to width constant.

The items that can be set are as follows.

[80%]…[100%]

(Factory setting: [90%])

[FRAME MARKER]

Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.

The items that can be set are as follows.

[4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]

(Factory setting: [OFF])

[FRAME COLOR]

Sets the color of the frame marker.

The items that can be set are as follows.

[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]

(Factory setting: [WHITE])

[SDI OUT2 MARKER]

[CENTER MARKER]

Switch the type of the center marker.

[1]	+ (large)
[2]	Open center (large)
[3]	+ (small)
[4]	Open center (small)
[OFF]	Does not display.

(Factory setting: [1])

[SAFETY MARKER]

Selects the type of frame for the safety zone marker.

[1]	Box
[2]	Corners
[OFF]	Does not display.

(Factory setting: [2])

[SAFETY AREA]

Sets the size of the safety zone marker.

It can be set in 1% steps with the ratio of length to width constant.

The items that can be set are as follows.

[80%]…[100%]

(Factory setting: [90%])

[FRAME MARKER]

Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.

The items that can be set are as follows.

[4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]

(Factory setting: [OFF])

[FRAME COLOR]

Sets the color of the frame marker.

The items that can be set are as follows.

[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]

(Factory setting: [WHITE])

[LCD/VF MARKER]

[TABLE]

Selects the setting table of the marker select function. Check or set the details of [A]/[B] at subsequent settings.

The items that can be set are as follows.

[A], [B]

(Factory setting: [A])

[CENTER MARKER]

Switch the type of the center marker.

[1]	+ (large)
[2]	Open center (large)
[3]	+ (small)
[4]	Open center (small)
[OFF]	Does not display.

(Factory setting: [1])

[SAFETY MARKER]

Selects the type of frame for the safety zone marker.

[1]	Box
[2]	Corners
[OFF]	Does not display.

(Factory setting: [2])

[SAFETY AREA]

Sets the size of the safety zone marker.

It can be set in 1% steps with the ratio of length to width constant.

The items that can be set are as follows.

[80%]…[100%]

(Factory setting: [90%])

[FRAME MARKER]

Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.

The items that can be set are as follows.

[4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]

(Factory setting: [OFF])

[FRAME LEVEL]

Sets the level for outside of the frame marker.

[0]	Equivalent to when signal is off (blanking status).
[1]…[14]	Becomes brighter as the number becomes higher.
[15]	Becomes same brightness as the center area.

(Factory setting: [15])

[FRAME COLOR]

Sets the color of the frame marker.

The items that can be set are as follows.

[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]

(Factory setting: [WHITE])

[FOCUS ASSIST]

[FOCUS ASSIST SELECT]

Sets the focus assist method when the USER button assigned with [FOCUS ASSIST] is operated.

[EXPAND]	Sets the enlarged display.
[PEAKING]	Sets the peaking display.
[SQUARES]	Sets the focus square display.
[EXPAND+PEAKING]	Displays in the combination of [EXPAND] and [PEAKING].
[EXPAND+SQUARES]	Displays in the combination of [EXPAND] and [SQUARES].

(Factory setting: [EXPAND])

[EXPAND MODE]

Sets the enlargement display function mode.

[10SEC]	Disables the enlarged display function after ten seconds have elapsed.
[HOLD]	Enables the enlarged display function until the <FOCUS ASSIST> button or the USER button assigned with [EXPAND] is pressed.
[UNTIL REC]	Enables the enlarged display function until recording starts.

(Factory setting: [10SEC])

[EXPAND VALUE]

Adjusts the enlargement factor of the enlarged display function.

The items that can be set are as follows.

[×2], [×3], [×4]

(Factory setting: [×2])

[PEAKING LEVEL]

Sets the intensity of the peaking display.

The items that can be set are as follows.

[LOW], [MID], [HIGH]

(Factory setting: [MID])

[PEAKING COLOR]

Sets the color of the peaking display.

The items that can be set are as follows.

[RED], [GREEN], [WHITE]

(Factory setting: [RED])

[BLACK & WHITE]

Enables/disables the monochrome display.

[ON]	Enables the monochrome display.
[OFF]	Disables the monochrome display.
[DURING PEAKING]	Enables the monochrome display while the peaking display is enabled.

(Factory setting: [OFF])

[DETAIL]

Sets the intensity of the contour for the video to make it easier to focus.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[DETAIL LEVEL]

Sets the intensity of the contours.

The items that can be set are as follows.

[−3]…[3]

(Factory setting: [0])

[DETAIL FREQ.]

Adjusts the frequency of the contour highlights.

The items that can be set are as follows.

[HIGH], [LOW]

(Factory setting: [LOW])

[EI ASSIST]

[ZEBRA1 DETECT]

Sets the detection level of zebra pattern 1.

The items that can be set are as follows.

[0%]…[109%]

(Factory setting: [80%])

[ZEBRA2 DETECT]

Sets the detection level of zebra pattern 2.

The items that can be set are as follows.

[0%]…[109%]

(Factory setting: [100%])

[ZEBRA2]

Enables/disables zebra pattern 2 and selects [SPOT].

The items that can be set are as follows.

[ON], [SPOT], [OFF]

(Factory setting: [OFF])

[LOW LIGHT LEVEL]

Sets the amount of the light entering the camera to be the reference to display [LOW LIGHT].

The items that can be set are as follows.

[OFF], [10%], [15%], [20%], [25%], [30%], [35%]

(Factory setting: [35%])

[WFM MODE]

Sets the display of the waveform monitor. Displaying of the waveform and the vector can be switched.

[WAVE]

Displays the waveform.

[VECTOR]

Displays the vector.

[WAVE/VECTOR]

Displays the waveform and the vector.

The display switches in the order of waveform, vector, and no display every time the USER button assigned with [WFM] is pressed.

(Factory setting: [WAVE])

[WFM TRANSPARENCE]

Sets the transmittance of the waveform monitor.

The items that can be set are as follows.

[0%], [25%], [50%]

(Factory setting: [25%])

[!LED]

[GAIN(0dB)]

Sets whether to illuminate the [!] lamp on the viewfinder when the gain is anything other than 0 dB.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[DS.GAIN]

Sets whether to illuminate the [!] lamp on the viewfinder when [DS.GAIN] (incremental gain) is working.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[SHUTTER]

Sets whether to illuminate the [!] lamp on the viewfinder when the electronic shutter is working.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[WHITE PRESET]

Sets whether to illuminate the [!] lamp on the viewfinder when the <WHITE BAL> switch is set to <PRST>.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[EXTENDER]

Sets whether to illuminate the [!] lamp on the viewfinder when the lens extender is working.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [ON])

[B.GAMMA]

Sets whether to illuminate the [!] lamp on the viewfinder when the black gamma is working.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[MATRIX]

Sets whether to illuminate the [!] lamp on the viewfinder when the color correction table for linear matrix is selected.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[COLOR CORRECTION]

Sets whether to illuminate the [!] lamp on the viewfinder when the <GAIN> switch matches the setting in the [SCENE FILE] menu → [COLOR CORRECTION], and the 16-axis independent color correction is set.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[FILTER]

Sets whether to illuminate the [!] lamp on the viewfinder for any setting combination other than the <CC FILTER> dial set to<A> (<3200 K>) and the <ND FILTER> dial set to <1> (<CLEAR>).

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

[ATW]

Sets whether to illuminate the [!] lamp on the viewfinder when the automatic tracking white balance function is working.

The items that can be set are as follows.

[ON], [OFF]

(Factory setting: [OFF])

Top of the page