Locking the video signal to the external reference signal
The video signal output from the camera can be locked to the reference signal supplied from an external source.
The camera can receive external reference signal from the <GENLOCK IN> terminal.
Generator-locking to the reference signal supplied from the <GENLOCK IN> terminal
The HD-Y signal or a composite signal matching the system frame frequency is supplied to the <GENLOCK IN> terminal. To enable the reference signal input to the <GENLOCK IN> terminal, it must be set to the [OTHERS] menu → [GENLOCK] → [GENLOCK] → [GL IN].
Adjust the horizontal phase of the reference signal and output signal at [H PHASE COARSE] and [H PHASE FINE].
Reference signal
System frequency ([REC FORMAT]) | Supported signals |
|---|
Composite signal | HD-Y signal/tri-level SYNC signal |
|---|
59.94i |
480/59.94i |
1080/59.94i |
59.94p |
50.00i |
576/50i |
1080/50i |
50.00p |
29.97p |
480/59.94i |
1080/59.94i |
25.00p |
576/50i |
1080/50i |
23.98p |
— |
1080/23.98PsF |