Copying clips

Clips can be copied between memory cards.

Only the clip recorded in P2 can be copied.

co_osd_thumbnail_clip_copy

Press the <THUMBNAIL> button.

The thumbnail screen is displayed.

Press the <MENU> button while the thumbnail screen is displayed.

The menu is displayed.

Select the [THUMBNAIL] menu → [CLIP] → [COPY].

Select [SELECT]. (Fig. 1)

  • All clips can be copied between the memory cards when [ALL] is selected.

Select the card slot for the copy destination. (Fig. 2)

The clips on the memory card of the copy source is displayed in the thumbnail screen. (Fig. 3)

  • [SLOT1→SLOT2]: Copies clips from the memory card in card slot 1 to the memory card in card slot 2.

  • [SLOT1→SLOT3]: Copies clips from the memory card in card slot 1 to the memory card in card slot 3.

  • [SLOT2→SLOT1]: Copies clips from the memory card in card slot 2 to the memory card in card slot 1.

  • [SLOT2→SLOT3]: Copies clips from the memory card in card slot 2 to the memory card in card slot 3.

  • [SLOT3→SLOT1]: Copies clips from the memory card in card slot 3 to the memory card in card slot 1.

  • [SLOT3→SLOT2]: Copies clips from the memory card in card slot 3 to the memory card in card slot 2.

Select the clip to copy in the thumbnail screen.

imageicon_clip_select is displayed on the selected clip.

Select imageicon_copy. (Fig. 4)

  • This can also be selected by pressing and holding the jog dial button.

When the confirmation message is displayed, select [SET].

Progress bar is displayed, and the copy of the clip starts.

[OVERWRITE?] is displayed when there is a same P2 clip in the copy destination. Select [SET] when overwriting the clip, and select imageicon_return when not overwriting the clip.

  • To cancel the copy midway, select [CANCEL].

When the completion message is displayed, select imageicon_return. (Fig. 5)