Thumbnail screen

Press the <THUMBNAIL> button to display the thumbnail screen while displaying the camera image screen.

Press the <THUMBNAIL> button again to display the camera image screen.

The clip in the recording file format (P2 or MOV) selected in the [SYSTEM] menu → [FILE FORMAT] is displayed in the thumbnail screen.

Also, menu in the thumbnail screen can be operated by pressing the <MENU> button while the thumbnail screen is displayed.

co_osd_thumbnail_description

  1. Clip status display

    [ALL SLOT]: Displays all the clips recorded on every memory card in each card slot.

    Displays in [ALL SLOT] when switched from the camera image screen to the thumbnail screen.

    [SLOT1]: Displays only the clips recorded on the memory card in card slot 1.

    [SLOT2]: Displays only the clips recorded on the memory card in card slot 2.

    [SLOT3]: Displays only the clips recorded on the memory card in card slot 3.

    [SAME FORMAT]: Displays only the clips recorded in the same format as the system format.

    Clips recorded in the same format means that each item of the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC FORMAT]/[AUDIO SAMPLE RES.] matches the current setting status.

    Following items are also displayed when set to the [SYSTEM] menu → [FILE FORMAT] → [P2].

    [SLOT1→SLOT2]: Displayed when copying from the memory card in card slot 1 to the memory card in card slot 2.

    [SLOT1→SLOT3]: Displayed when copying from the memory card in card slot 1 to the memory card in card slot 3.

    [SLOT2→SLOT1]: Displayed when copying from the memory card in card slot 2 to the memory card in card slot 1.

    [SLOT2→SLOT3]: Displayed when copying from the memory card in card slot 2 to the memory card in card slot 3.

    [SLOT3→SLOT1]: Displayed when copying from the memory card in card slot 3 to the memory card in card slot 1.

    [SLOT3→SLOT2]: Displayed when copying from the memory card in card slot 3 to the memory card in card slot 2.

  2. Function display

    This is displayed during the operation of copy, delete, protect, etc.

  3. Recording mode

    imageicon_p2: Displayed when P2 is selected as the recording file format.

    imageicon_mov: Displayed when MOV is selected as the recording file format.

    imageicon_p2_dim: Displayed when MOV is selected as the recording file format, and there is at least one P2 clip on any of the memory cards.

    imageicon_mov_dim: Displayed when P2 is selected as the recording file format, and there is at least one MOV clip on any of the memory cards.

  4. Defective clip status

    imageicon_ng_clip_yellow: Displayed when P2 is selected as the recording file format and there is at least one defective P2 clip that may be repaired in the thumbnail screen.

    imageicon_ng_clip_red: Displayed when P2 is selected as the recording file format and there is at least one defective P2 clip that cannot be repaired in the thumbnail screen.

    (No display): There is no defective P2 clip in the thumbnail screen.

  5. Media status display

    The card slot number of the memory card where the clip in the cursor position is recorded is displayed in yellow.

  6. Connection status of the wireless LAN/wired LAN

    Displays the connection status of the wireless LAN or wired LAN.

    (No display): It is not connected via wired LAN or wireless LAN. It is set to the [NETWORK] menu → [DEVICE SEL] → [OFF].

    imageicon_icon_ic_lan_on: It is set to the wired LAN, and ROP is not connected.

    imageicon_ic_lan_on_rop: It is set to the wired LAN, and ROP is connected.

    imageicon_rop_not_connect_1: It is set to the wireless LAN, and ROP is not connected.

    imageicon_rop_connect: It is set to the wireless LAN, and ROP is connected.

  7. Battery status display

    Displays the battery remaining capacity.

    Display unit is “V” (voltage display) or “%” (percentage display).

  8. Scroll bar

    Indicates which part of the whole thumbnail is currently being viewed.

  9. Clip that cannot be played back

    Displays when the clip cannot be played back in the camera such as standard violation.

  10. Cursor

  11. Page switching button

    Switches the page of the thumbnail screen.

    [`]: Moves to previous page

    [{]: Moves to next page

Display of the clips in the thumbnail screen

osd_thumbnail_4clips

  1. Thumbnail number

    Displays the thumbnail number in [0001] to [9999].

    Normally, the number assigned to the clip in the order of recording is displayed.

  2. Resume play status

  3. Number of recording pixels, system frequency

  4. Recording file format, recording codec

  5. Protection status of the clip

    This is displayed when the clip is protected.

  6. Standard time code/clip name

    The first eight digits for the time code when starting shooting of a clip or the file name of the clip are displayed in alphanumeric.

    The information to display is set in the [THUMBNAIL] menu → [DISPLAY] → [DATA].

  7. Delete selection status

  8. Clip that cannot be played back

    This is displayed when the clip cannot be played back with the camera because the system frequency is different, etc.

  9. Copy selection status

    This is displayed when the clip is selected.

  10. Re-connection selection status

    This is displayed when the clip to be re-connected is selected.

  11. Incomplete clip

    imageicon_clip_incomplete: This is displayed for a P2 clip when the clip is recorded over multiple memory cards, and any of those memory cards are not inserted.

  12. Defective clip/unknown clip

    imageicon_ng_clip_yellow: This is displayed for a defective P2 clip that may be repaired.

    imageicon_ng_clip_red: This is displayed for a defective P2 clip that cannot be repaired.

    imageicon_clip_missing: This is displayed for a P2 clip with a different format for P2 standard.

Display of clip information

Displays the information of the clip where the cursor is positioned.

Move the yellow cursor to the clip to display the clip information.

Select the [THUMBNAIL] menu → [CLIP] → [INFORMATION].

The clip information is displayed.