How to input user bits

By setting user bits, information such as memos (date, time) up to eight digits long (hexadecimal) can be recorded.

Set the <DISPLAY> switch to <UB>.

Set the <TCG> switch to <SET>.

Set the user bits by the cursor operation buttons.

  • Screen display

    • I: The digit to be set (flashing) moves to the right.

    • Y: The digit to be set (flashing) moves to the left.

    • `: The value of the digit to set (flashing) is incremented by one.

    • {: The value of the digit to set (flashing) is decremented by one.

Set the <TCG> switch to <F-RUN> or <R-RUN>.

Set to the [RECORDING] menu → [TC/UB] → [UB MODE] → [USER].

Frame rate information recorded on user bits

Recording the frame rate values for the image information shot/recorded according to the frame rate set in the [SYSTEM] menu → [REC FORMAT] to user bits allows you to use on the editor (personal computer editing software).

Frame rate information

The relationship between frame rate, image pull-down, time code, and user bits is as follows.

co_other_framerate_info