Focus assist function

Enlarged display

Peaking display/focus square display

The peaking display will outline the contour of the focused image in red, green, or white.

The degree of focus is indicated by the size of the square in the focus square display.

How to use the focus square display

Adjust focus so that the size of the square shown over the desired subject to focus on becomes the largest size.

Monochrome display

Enables/disables the monochrome display in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [BLACK & WHITE].

[ON]: Enables the monochrome display.

[OFF]: Disables the monochrome display.

[DURING PEAKING]: Enables the monochrome display while the peaking display is enabled.

Highlighting the contours of images

It is easier to focus if the contours of images on the LCD monitor and viewfinder are highlighted.

Highlighting contours does not affect the images output or recorded by the camera.

Highlights the contours of images when set to the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [DETAIL] → [ON].

Intensity of the contour can be adjusted in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [DETAIL] → [DETAIL LEVEL].

Frequency of the contour can be adjusted in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [DETAIL] → [DETAIL FREQ.].