Switch settings for shooting

After turning on the power and inserting a memory card, set the switches as follows.

body_switch_settings

  1. <GAIN> switch

    Normally, set this to <L> (0 dB). If it is too dark, set the gain to an appropriate value.

  2. <OUTPUT>/<AUTO KNEE> switch

    Set this switch to <CAM>/<ON>.

  3. <TCG> switch

    Set this switch to <F-RUN> or <R-RUN>.

  4. <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch

    Set this switch to <AUTO>.