Mounting the external microphone

External microphone such as the super-directional microphone AG-MC200G (optional) can be mounted onto the handle.

Screws are attached on the camera body in advance to protect the screw holes. Remove those screws when you attach the microphone holder.

  • The microphone holder cannot be mounted with the screws originally attached to the camera. Use the supplied microphone holder screws.

co_body_use_front_mic

Mount the supplied microphone holder to the microphone holder mounting section using the microphone holder screws (x 2). (Fig. 1)

Mount the external microphone and tighten the microphone holder screws. (Fig. 2)

Connect the microphone cable to the <AUDIO INPUT 1> terminal. (Fig. 3)

Attach the microphone cable to the microphone cable clamp.

Toggle the <INPUT1> switch to match the microphone to be connected.