Checking and displaying shooting status

The screen to check the setting and status of the camera can be displayed.

Press the <DISP/MODE CHK> button while the camera image screen is displayed to hide most of the items.

Press the <DISP/MODE CHK> button for one second or more while the camera image screen is displayed to display the STATUS screen of the mode check and check the shooting status.

For details about each item that can be displayed in the mode check, refer to “Mode check display”.

The following table indicates each item to display/hide in each screen.

  • “✓” indicates displaying and “—” indicates hiding.

  • You can select to display or hide each item in the [VIDEO OUT/LCD/VF] menu → [INDICATOR].

No

Item

Camera image screen

When the <DISP/MODE CHK> button is pressed

STATUS

Playback screen

1

Time code

2

Frame rate

3

<AUTO/MANUAL> switch

4

Message display area for stop of cooling fan

5

Recording status (card slot 1)

✓*1

6

Remaining recording capacity and status of the memory card (card slot 1)

—*2

7

External equipment recording operation control status (<SDI OUT>/<HDMI> terminal)

8

Recording status (card slot 2)

✓*1

9

Remaining recording capacity and status of the memory card (card slot 2)

—*2

10

Special recording function

11

Two-slot function

12

Flash band compensation function

13

Streaming status

14

High dynamic range recording function/dynamic range stretcher function

15

Connection status of the wireless LAN/wired LAN

16

Power status

—*2

17

Audio level meter

18

Luminance of Y GET

19

Gain

20

ND filter

21

Date and time information

22

Shutter speed

23

Auto iris control status

24

High-sensitivity mode

25

Iris

26

Zoom

27

System resolution/system frequency

28

Recording format

29

Recommended ND filter

30

Message display area

31

Level gauge

32

Error display of auto white balance

33

Error display of auto black balance

34

Remote control status in an IP connection

35

Multi manual function

—*3

36

Color temperature

37

Optical image stabilizer function

38

Scene file name

39

Area mode function/auto focus area width adjustment function

40

Waveform monitor

41

IR recording

42

Digital zoom

43

Focus

44

Audio monitor volume adjustment

This is not displayed in the status where imageicon_red/imageicon_green is not displayed.

Displays when the remaining recording capacity of the memory card or remaining battery level gets low.

Displays when the multidial, <=/&> button, <(> button, or <SET> button is pressed. The display is cleared approximately three seconds after the operation.