Operating the menu

Various settings are possible from the menu.

There are two methods of operation: a method to operate with the multidial, or a method to touch the LCD monitor.

When operating with the multidial

Operate the multidial on the camera by turning it in vertical direction or pushing it.

Operations can also be performed by pressing the <%> button, <(> button, <)> button, <=/&> button and <SET> button.

co_osd_menu

Press the <MENU> button when not recording.

The menu is displayed.

Select the menu to set.

Turn the multidial to move the cursor to the menu to set.

The cursor can also be moved by pressing the <(> button and <=/&> button.

Press the multidial or the <SET> button.

The lower level menu is displayed.

  • The confirmation screen is displayed depending on the menu.

  • Perform the similar operation if there is next level.

  • In some menus, a screen to set the numeric value is displayed in the camera image screen (Fig. 2).

  • In some menus, a message is displayed if a menu cannot be executed.

  • Press the <EXIT> button or the <%> button to return to one level higher.

Select the item to set.

Turn the multidial to move the cursor to the item to set.

The cursor can also be moved by pressing the <(> button and <=/&> button.

Press the multidial or the <SET> button.

A check mark is displayed at the left of the set item. (Fig. 1)

  • Press the <EXIT> button or the <%> button to return to one level higher.

Press the <MENU> button to close the menu.

  • Depending on the operating item, it will automatically return to the previous screen.

When operating by touching the LCD monitor

Operate by touching the LCD monitor.

osd_menu

Press the <MENU> button when not recording.

The menu is displayed.

Select the menu to set.

  • Touch the menu to set. The lower level menu is displayed.

  • The confirmation screen is displayed depending on the menu.

  • Perform the similar operation if there is next level.

  • In some menus, a screen to set the numeric value is displayed in the camera image screen.

    To change the numeric value, touch [`]/[{] and change the setting value.

  • In some menus, a message is displayed if a menu cannot be executed.

  • Touch [`]/[{] to toggle the pages.

    The button icons cannot be touched if there are no more pages.

  • To return to one level higher, touch imageicon_return.

Select the item to set.

  • Touch the item to set. A check mark is displayed at the left of the set item.

  • To return to one level higher, touch imageicon_return.

Exit from the menu by touching imageicon_return, or pressing the <MENU> button.

  • Depending on the operating item, it will automatically return to the previous screen.