In following cases, an error message may be displayed and it may need restoration of the clip depending on the condition. It may take some time to restore depending on the error.
When the memory card in the card slot that is flashing is removed while the card 1 access lamp or the card 2 access lamp is flashing
When the power is turned off by removing the battery or the AC adaptor while recording or performing record completion process
Fig. 1
Select [SET] in the error message screen. (Fig. 1)
Once the repair is completed, select in the confirmation message. It will return to the previous screen.
is displayed on the clip when an abnormal management information is detected while displaying the thumbnail.
in the confirmation message. It will return to the previous screen.
is displayed on the clip when an abnormal management information is detected while displaying the thumbnail.