Specifying the network settings
Sets the wired LAN setting. (Wired LAN settings)
Operating Instructions AG-CX350E
Sets the wired LAN setting. (Wired LAN settings)
Set the [SYSTEM] menu → [FREQUENCY]/[REC FORMAT].
For details about the setting items, refer to “Settings when using the NDI|HX function”.
Select the [NETWORK] menu → [NETWORK FUNC] → [NDI|HX].
The NDI|HX function is selected. The camera will automatically restart.
Set the streaming format with the [NETWORK] menu → [NDI|HX] → [STREAMING FORMAT].
Refer to the website of NewTek, etc., and enable the NDI|HX function. [NDI|HX] is displayed in the [NETWORK] menu → [NDI|HX] → [ACTIVATION] when the NDI|HX function is enabled.
Control the camera by operating the NDI|HX compatible switcher.
Select the [NETWORK] menu → [NDI|HX] → [CLEAR ACTIVATION].
The activation information saved to the camera is deleted.
After the activation information is deleted, the NDI|HX function cannot be used until the NDI|HX function is enabled again.