[FORMAT MEDIA]
Formats the memory card in the specified card slot. Data deleted as a result of formatting cannot be restored. Always confirm the data before formatting.
The items that can be selected are as follows.
[SLOT1], [SLOT2]
Operating Instructions AG-CX350E
Sets the various items in the recording function.
Formats the memory card in the specified card slot. Data deleted as a result of formatting cannot be restored. Always confirm the data before formatting.
The items that can be selected are as follows.
[SLOT1], [SLOT2]
Sets the CAM INDEX used in the name for the MOV format file to be recorded. Set one upper case alphabetical character. This is used as a value to be stored in the volume label of the memory card.
The items that can be set are as follows.
[A]…[Z]
(Factory setting: [A])
Sets the CARD COUNT used in the name for the MOV format file to be recorded. In the following cases, the setting value in [NEXT CARD COUNT] is stored in the volume label of the memory card together with the [CAM INDEX] setting value as CARD COUNT. Also, the setting value will increase one after storing. ([001] returns after [999])
When formatted the memory card
When recorded to the memory card where CARD COUNT is not stored in the volume label
The items that can be set are as follows.
[001]…[999]
(Factory setting: [001])
Sets the recording function that uses two memory cards.
[OFF] |
Does not set. |
[RELAY REC] |
Sets to the relay recording. |
[SIMUL REC] |
Sets to the simultaneous recording. |
[BACKGR REC] |
Sets to the background recording. |
(Factory setting: [RELAY REC])
Sets whether to perform pre-recording.
The pre-recording time varies depending on the setting of the [SYSTEM] menu → [REC FORMAT].
[ON] |
Performs the pre-recording. The pre-recording time is as follows.
|
[OFF] |
Does not perform the pre-recording. |
(Factory setting: [OFF])
Selects the recording mode.
[NORMAL] |
Performs the standard recording. |
[INTERVAL] |
Performs the interval recording. (A function to repeatedly perform the operation of one frame recording in set time interval.) |
(Factory setting: [NORMAL])
Selects whether to hold [REC MODE] settings.
[ON] |
Holds the settings. |
[OFF] |
Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on. |
(Factory setting: [OFF])
Sets the interval duration for interval recording.
The items that can be set are as follows.
[1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
Sets the default value of the time code to record.
Hour |
[00]…[23] |
Minute |
[00]…[59] |
Second |
[00]…[59] |
Frame |
[00] … [23] (when [23.98p]) [00] … [24] (when [50.00i], [50.00p], or [25.00p] is set) [00] … [29] (when [59.94i], [59.94p], or [29.97p] is set) |
(Factory setting: [00]) (each item)
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC/UB].
Each digit can be set in following range.
[00]…[FF]
(Factory setting: [00])
Sets the operation mode to advance the time code generator.
[FREE RUN] |
Advances regardless of the operation mode. |
[REC RUN] |
Advances only while recording. |
(Factory setting: [REC RUN])
Sets the count method for the time code generator.
Enabled only when the recording frame frequency of the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/59.94p/29.97p.
[DF] |
Uses the drop frame mode. |
[NDF] |
Uses the non-drop frame mode. |
(Factory setting: [DF])
Selects the user bits mode. User bits information is recorded in the clip. Also, it is output as LTC UB, VITC UB of the SDI signal.
[FRAME RATE] |
Selects the image information (such as frame rate) of the camera. |
[USER] |
Selects the user bits set in [UB PRESET]. |
[TIME] |
Selects the local time. (hh, mm, ss) |
[DATE] |
Selects the local date and time. (YY, MM, DD, hh) |
[TC] |
Records the time code value as user bits. |
[CLIP NAME] |
Records the value that CAM INDEX (one character) and CARD COUNT (three-digit number) both converted to ASCII character code. Only enabled when the [SYSTEM] menu → [FILE FORMAT] → [MOV] is set. |
(Factory setting: [USER])
Sets the input/output of the <TC IN/OUT> terminal.
[TC IN] |
Sets to the time code input. |
[TC OUT] |
Sets to the time code output. |
(Factory setting: [TC IN])
Sets the output delay of the time code that is output from the <TC IN/OUT> terminal.
[RECORDING] |
Outputs the recording time code without delay. This is used when performing simultaneous recording on two cameras with the time code of this camera as the master. |
[SDI OUT] |
Matches to output image from the <SDI OUT> terminal. Outputs without delay when video is not output from the <SDI OUT> terminal. |
(Factory setting: [RECORDING])
Sets operation of the counter for recording.
[TOTAL] |
Performs continuous counting until reset using the <RESET> button. |
[CLIP] |
Clears the counter value at the start of recording and counts the time for each recording. |
(Factory setting: [TOTAL])
Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.
[OFF] |
Does not superimpose the date and time. |
[DATE] |
Superimposes only the date. |
[TIME] |
Superimposes only the time. |
[DATE&TIME] |
Superimposes the date and time. |
(Factory setting: [OFF])