Operating Instructions AK-UB300G

Print this page

Top
Operation
Multi-formats
List of output formats (<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals)

List of output formats (<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals)

Use following BNC cable in accordance to the signal to be output.

12G or 6G signal: 12G BNC cable
Signal other than above: 5C-FB or higher BNC cable

UHD

When the 12G output board AK-UHD12G is used, and [UHD-SDI S-LINK] is set to [ON]

[UHD SDI OUT TYPE] and [HD-SDI 3G SDI] are displayed as [---], and cannot be selected.

[MAIN MENU]	<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals
[FORMAT]	1	2	3	4
[2160/60p]	2160/60p (12GSL)	2160/60p (12GSL)	No output
[2160/59.94p]	2160/59.94p (12GSL)	2160/59.94p (12GSL)	No output
[2160/29.97p]	2160/29.97p (6GSL)	2160/29.97p (6GSL)	No output
[2160/23.98p]	2160/23.98p (6GSL)	2160/23.98p (6GSL)	No output
[2160/50p]	2160/50p (12GSL)	2160/50p (12GSL)	No output
[2160/25p]	2160/25p (6GSL)	2160/25p (6GSL)	No output

When the 12G output board AK-UHD12G is used, and [UHD-SDI S-LINK] is set to [OFF], or when the standard equipment board is used

[MAIN MENU]		<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals
[FORMAT]	[UHD SDI OUT TYPE]	1, 2	3, 4
[2160/60p]	[SQUARE]	2160/60p (3GQL SQD)
	[2 SAMPLE INT]	2160/60p (3GQL 2SI)
[2160/59.94p]	[SQUARE]	2160/59.94p (3GQL SQD)
	[2 SAMPLE INT]	2160/59.94p (3GQL 2SI)
[2160/29.97p]	[SQUARE]	2160/29.97p (1.5GQL SQD)
	[2 SAMPLE INT]	2160/29.97p (3GDL 2SI)	No output
[2160/23.98p]	[SQUARE]	2160/23.98p (1.5GQL SQD)
	[2 SAMPLE INT]	2160/23.98p (3GDL 2SI)	No output
[2160/50p]	[SQUARE]	2160/50p (3GQL SQD)
	[2 SAMPLE INT]	2160/50p (3GQL 2SI)
[2160/25p]	[SQUARE]	2160/25p (1.5GQL SQD)
	[2 SAMPLE INT]	2160/25p (3GDL 2SI)	No output

When the 12G output board AK-UHD12G or the standard equipped board is used, and [FORMAT] is set to [2160/29.97PsF]/[2160/23.98PsF]/[2160/25PsF]

[UHD-SDI S-LINK], [UHD SDI OUT TYPE], and [HD-SDI 3G SDI] are displayed as [---], and cannot be selected.

[MAIN MENU]	<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals
[FORMAT]	1	2	3	4
[2160/29.97PsF]	2160/29.97PsF (1.5GQL SQD)
[2160/23.98PsF]	2160/23.98PsF (1.5GQL SQD)
[2160/25PsF]	2160/25PsF (1.5GQL SQD)

When the 3G TICO UHD output board AK-UTS03G is used

[UHD SDI OUT TYPE] and [HD-SDI 3G SDI] are displayed as [---], and cannot be selected.

[MAIN MENU]	<UHD/HD SDI OUT 1>/<UHD/HD SDI OUT 2> terminals
[FORMAT]	1	2
[2160/60p]	2160/60p (3G)	2160/60p (3G)
[2160/59.94p]	2160/59.94p (3G)	2160/59.94p (3G)
[2160/29.97p]	2160/29.97p (1.5G)	2160/29.97p (1.5G)
[2160/29.97PsF]	2160/29.97p (1.5G)	2160/29.97p (1.5G)
[2160/23.98p]	2160/23.98p (1.5G)	2160/23.98p (1.5G)
[2160/23.98PsF]	2160/23.98p (1.5G)	2160/23.98p (1.5G)
[2160/50p]	2160/50p (3G)	2160/50p (3G)
[2160/25p]	2160/25p (1.5G)	2160/25p (1.5G)
[2160/25PsF]	2160/25p (1.5G)	2160/25p (1.5G)

UHD CROP

[UHD-SDI S-LINK] will not display. Setting of [UHD SDI OUT TYPE] and [HD-SDI 3G SDI] will be disabled.

[MAIN MENU]	<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals
[FORMAT]	1	2	3	4
[1080/59.94p CROP]	1080/59.94p	1080/59.94p	No output
[1080/59.94i CROP]	1080/59.94i	1080/59.94i	No output
[1080/50p CROP]	1080/50p	1080/50p	No output
[1080/50i CROP]	1080/50i	1080/50i	No output

HD

[UHD-SDI S-LINK] will not display. Setting of [UHD SDI OUT TYPE] and [HD-SDI 3G SDI] will be disabled.

[MAIN MENU]	<UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals
[FORMAT]	1	2	3	4
[1080/60p]	1080/60p	1080/60p	No output
[1080/59.94p]	1080/59.94p	1080/59.94p	No output
[1080/59.94i]	1080/59.94i	1080/59.94i	No output
[1080/29.97PsF]	1080/29.97PsF	1080/29.97PsF	No output
[1080/23.98PsF]	1080/23.98PsF	1080/23.98PsF	No output
[1080/23.98p]	1080/23.98p over 59.94i	1080/23.98p over 59.94i	No output
[1080/50p]	1080/50p	1080/50p	No output
[1080/50i]	1080/50i	1080/50i	No output
[1080/25PsF]	1080/25PsF	1080/25PsF	No output
[720/60p]	720/60p	720/60p	No output
[720/59.94p]	720/59.94p	720/59.94p	No output
[720/50p]	720/50p	720/50p	No output

Top of the page