[INTELLIGENT]

[MEMORY]

Switches the target memory for the intelligent function.

• Factory setting: [1]

[MASTER GAIN]

Displays the current total of gain.

[ND FILTER]

Displays the current position of the ND filter.

[INTELLIGENT]

Sets the operation mode of the intelligent function.

[OFF]: Operates with the setting from the menu or the camera controller.

[ON]: Performs the automatic exposure and auto tracking white balance.

[LOCK]: Maintains the automatic exposure and auto tracking white balance adjustment status of the point when [ON] is switched to [LOCK].

• Factory setting: [OFF]

[INTELLIGENT MODE]

Sets the control item of the intelligent function.

This cannot be changed when [INTELLIGENT] is set to [LOCK].

[AE]: Controls the gain (including [FRAME MIX]) and the automatic exposure by changing the ND filter when it cannot be adjusted within the range of [IRIS RANGE].

[ATW]: Adjusts the white balance automatically when it is determined that there is white subject.

[AE+ATW]: Performs [AE] and [ATW] simultaneously.

• Factory setting: [AE+ATW]

[ND FILTER SELECT]

Sets the ND filter that is in operation for automatic exposure.

Control from the camera control cannot be performed during operation for automatic exposure.

• Factory setting: [AUTO]

[AGC SPEED]

Sets the convergence time for the auto gain control.

The larger the value, the faster the convergence time.

• Factory setting: [3]

[AGC GAIN STEP]

Sets the steps for gain increase or gain decrease for the auto gain control.

[NORMAL]: Gain is increased in fine steps from 0 dB to the value set in [AGC MAX GAIN] when underexposed. Gain is decreased in fine steps from the value set in [AGC MAX GAIN] to 0 dB when overexposed.

[MAX]: Gain is increased in coarse steps from 0 dB to the value set in [AGC MAX GAIN] when underexposed. Gain is decreased in coarse steps from the value set in [AGC MAX GAIN] to 0 dB when overexposed.

Set [AGC MAX GAIN] so it will not exceed the movable range of the lens iris when set to [MAX].

• Factory setting: [NORMAL]

[HIGH LIGHT DETECT]

Sets the level of ignorance in 10 steps when a spot light enters the valid image. The larger the value, the more it will response to spot light.

• Factory setting: [5]

[IRIS LIMIT]

Sets the iris control range for the auto gain control operation.

[1]: F2.0 - F8

[2]: F2.0 - F11

[3]: F2.0 - F16

• Factory setting: [2]

[ATW SPEED]

Sets the convergence time for the auto tracking white balance in 5 steps. The larger the value, the faster the convergence time.

• Factory setting: [3]

[ATW WIDTH]

Sets the range of color temperature to follow with the auto tracking white balance.

• Factory setting: [5]

[D5600K]

Sets if the center value of the auto tracking white balance is to be set to 5600 K.

• Factory setting: [ON]

[AGC MODE]

Sets the control mode for the auto gain control.

[NORMAL]: Increases the gain up to +18 dB by the control of the auto gain control.

[SPORTS]: Controls in accordance with an image with fast movement.

[SN]: Controls by prioritizing SN.

• Factory setting: [NORMAL]

[AGC MAX GAIN]

Displays the maximum gain increase of the auto gain control.

[FRAME MIX]

Displays the amount of maximum frame addition by the auto gain control.

[INTELLIGENT]

Switches the intelligent mode.

[OFF]: Both [INTELLIGENT1] and [INTELLIGENT2] will be manual.

[INTEL1]: [INTELLIGENT1] will be auto and [INTELLIGENT2] will be manual.

[INTEL2]: [INTELLIGENT1] will be manual and [INTELLIGENT2] will be auto.

• Factory setting: [OFF]

[IRIS ON LOCK]

Selects the operating condition of the iris when the intelligent function is locked.

[LOCK]: Maintains the iris in the lock start condition.

[MANUAL]: Switches to manual operation.

[PANEL]: Switches the auto/manual of the iris operation by the control from the camera controller.

• Factory setting: [LOCK]