Displaying the zebra pattern

The camera can display two types of zebra patterns.

The zebra pattern set by the menu is displayed by setting [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [ZEBRA] → [ON].

The level for zebra pattern display can be set in [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [ZEBRA].

Item	Description of settings
[ZEBRA1 LEVEL]	Sets the level of the luminance zebra 1. [0%] - [109%] Factory setting: [80%]
[ZEBRA2 LEVEL]	Sets the level of the luminance zebra 2. [0%] - [109%] Factory setting: [100%]
[ZEBRA PATTERN]	Sets the pattern of the luminance zebra. [1], [1+2], [SPOT] Factory setting: [1]

Item

Description of settings

[ZEBRA1 LEVEL]

Sets the level of the luminance zebra 1.

[0%] - [109%]

[ZEBRA2 LEVEL]

Sets the level of the luminance zebra 2.

[0%] - [109%]

[ZEBRA PATTERN]

Sets the pattern of the luminance zebra.

[1], [1+2], [SPOT]

[SPOT]: The image level from the setting value of [ZEBRA1 LEVEL] to the setting value of [ZEBRA2 LEVEL] is displayed in the zebra pattern.