[SYSTEM MODE]

[FORMAT] cannot be selected right after the power is turned ON, or when 59.94, 29.97, 23.98 and 50, 25 in [FORMAT] are switched since the unit is starting up.

This is not an error. Perform operation after a while.

Item

Description of settings

[FORMAT]

Sets the system format.

[2160/60p], [2160/59.94p], [2160/50p], [2160/29.97p], [2160/29.97PsF], [2160/25p], [2160/25PsF], [2160/23.98p], [2160/23.98PsF], [1080/60p], [1080/59.94p], [1080/59.94p CROP], [1080/59.94i], [1080/59.94i CROP], [1080/50p], [1080/50p CROP], [1080/50i], [1080/50i CROP], [1080/29.97PsF], [1080/25PsF], [1080/23.98p], [1080/23.98PsF], [720/60p], [720/59.94p], [720/50p]

  • Factory setting: [2160/59.94p]

[HDR SW (MAIN)]

Switches the HDR/SDR for the signal output from the <UHD/HD SDI OUT 1> to <UHD/HD SDI OUT 4> terminals.

[ON]: HDR

[OFF]: SDR

  • Factory setting: [OFF]

[HDR SW (SDI 1)]

imageicon_user_file

Switches the HDR/SDR for the signal output from the <HD SDI OUT 1> terminal.

[ON]: HDR

[OFF]: SDR

  • Factory setting: [ON]

[HDR SW (SDI 2)]

imageicon_user_file

Switches the HDR/SDR for the signal output from the <HD SDI OUT 2> terminal.

[ON]: HDR

[OFF]: SDR

  • Factory setting: [ON]

[HDR SW (LAN)]

imageicon_user_file

Switches the HDR/SDR for the signal output from the <LAN> terminal.

[ON]: HDR

[OFF]: SDR

  • Factory setting: [ON]

[SHOOTING MODE]

imageicon_user_file

Sets the shooting mode.

[NORMAL], [HIGH SENS]

  • Factory setting: [NORMAL]

[SCAN REVERSE]

imageicon_user_file

Sets the scan method of the image output.

[OFF], [H], [V], [H+V]

  • Factory setting: [OFF]