Operating Instructions AK-UB300G
UB300 Setting Tool is dedicated for AK-UB300G.
This operates in Windows and Macintosh.
Changing of the setting menu and updating of the firmware for AK-UB300G are possible.
Black balance adjustment
Black control function
Center marker
Chroma setting function
Color bar
Color correction function
Connector signal
Detail function
[DIAGNOSTIC]
[DISPLAY SETUP]
Dynamic range stretcher function
Environment for computer
FBC
[FILE]
Flash band compensation function
Focus assist function
Frame frequency setting
Frame marker
Gamma function
Genlock adjustment
Haze elimination function
[HDR‑PAINT]
High color function
[IN/OUT SELECT]
Intelligent function
[INTELLIGENT]
Iris gain volume adjustment
Knee function
Lens flange back adjustment
[Live] screen
Multi display mode
Single display mode
[MAINTENANCE]
Matrix function
Menu
Configuration
Operations
Network settings
Plugin software for display
Setup software
[NETWORK SETUP]
On-screen display
Operating time
Output format(1)
Output format(2)
[PAINT]
RB gain control function
Safety zone marker
Scan reverse shooting
[Setup] screen
[Basic] screen
[Image] screen
[Maintenance] screen
[Multi‑screen setup] screen
[Network] screen
[User mng.] screen
Shutter mode
Shutter speed
Skin tone function
Specifications
[SWITCH MODE]
Synchro scan mode
[SYSTEM MODE]
UB300 Setting Tool
Connection setting screen
Firmware update function screen
Install
Setting menu screen
Top screen
UHD crop function
User file
Warning displays
White balance adjustment
White clip function
Zebra pattern