Connection setting
It can connect to any AK-UB300G by setting the connection information.
The items that can be set are as follows.
Once these items are set, click the [Connect] button to connect to the specified AK-UB300G.
Operating Instructions AK-UB300G
It can connect to any AK-UB300G by setting the connection information.
The items that can be set are as follows.
Once these items are set, click the [Connect] button to connect to the specified AK-UB300G.
Update can be performed on the connected AK-UB300G by specifying an arbitrary firmware.
The firmware that can be updated are as follows.
CAM MAIN
NETWORK
ROM TABLE
CAM FPGA
AVIO FPGA
Option (enabled only when an option board is added)
Setting menu of the connected AK-UB300G can be operated.
The status of the displayed setting menu is synchronized with the connected AK-UB300G.
However, all setting menu items cannot be operated from this tool.
The buttons for OSD menu operation for AK-UB300G can be executed.
Use this when performing OSD operation while viewing the image output from AK-UB300G.