UHD crop function

HD crop image from the UHD signal can be output to the <HD SDI OUT 1> terminal, <UHD/HD SDI OUT 1>/ <UHD/HD SDI OUT 2> terminal, and <LAN> terminal when [MAIN MENU] → [SYSTEM MODE] → [FORMAT] → [1080/59.94p CROP]/[1080/59.94i CROP]/[1080/50p CROP]/[1080/50i CROP] is selected (Fig. 2)

At this time, the HD signal with UHD aspect ratio is output to the image from the <HD SDI OUT 2> terminal, and crop frame is displayed. (Fig. 1)

To output the HD crop image to the image from the <HD SDI OUT 2> terminal, select [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [HD-SDI2 OUT SEL] → [CROP].

To display the crop frame of the UHD aspect ratio on the image from the <LAN> terminal, select [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [LAN OUT SEL] → [FULL].

co_osd_uhd_crop

  • The cropped image to be output can be selected from three types in [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [CROP OUT SEL].

    The selected crop frame is displayed bright, and it is confirmed by pressing the jog dial.

    [YL]: Image of yellow crop frame is output.

    [G]: Image of green crop frame is output.

    [MG]: Image of magenta crop frame is output.

  • Displaying of the crop frame can be selected in [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [CROP MARKER SEL].

    osd_uhd_crop_move

    [YL]: Only the yellow crop frame is displayed.

    [G]: Only the green crop frame is displayed.

    [MG]: Only the magenta crop frame is displayed.

    [YL+G]: The yellow and green crop frames are displayed.

    [YL+MG]: The yellow and magenta crop frames are displayed.

    [G+MG]: The green and magenta crop frames are displayed.

    [YL+G+MG]: The yellow, green, and magenta crop frames are displayed.

    If the crop frame is overlapping in the same position, the crop frame selected in [CROP OUT SEL] will be prioritized, and then it is displayed in the order of [YL], [G], and [MG].

To move the crop frame

  • Selects the color of the crop frame in [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [CROP ADJ SEL].

    [YL]: Sets the position of yellow crop frame.

    [G]: Sets the position of green crop frame.

    [MG]: Sets the position of magenta crop frame.

  • Sets the position of the crop frame in [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [CROP H POSITION]/[CROP V POSITION].

    [CROP H POSITION]: Moves horizontally.

    [CROP V POSITION]: Moves vertically.